Списък на продуктите по марка Veritas

Veritas Box-Maker’s Plough Plane 🪚 Премиум оборудване за дървообработка | JetTools.bg
    Няма наличност!
    Specialist Planes-bg

    Veritas Box-Maker’s Plough Plane

    Veritas
    ax1057570
    518,56 лв.
    Small joinery plane, perfect for cutting drawer and box bottomsExcels at cutting grooves, rebates and decorative beadsComfortable to hold with a nice weight and balanceEffective cutting angle of 45°Ductile cast-iron body; 139.7mm (5 1/2") longSupplied with a 6.35mm (1/4") wide lapped A2 tool steel bladeAvailable in both left or right-handed-bg
    Дърводелска цикла Veritas Round PM-V11 🪚 Премиум оборудване за дървообработка | JetTools.bg
      Склад Axminster: Доставка 10-15 раб. дни!
      Дърводелски цикли

      Дърводелска цикла Veritas Round PM-V11

      Veritas
      105210
      392,44 лв.
      Проектиран за гладко, ефективно и без вибрации оформяне Корпус от ковък чугун с дървени дръжки Изключително издръжливо острие от стоманена сплав PM-V11 Двойни регулиращи колела за прецизен контрол на дълбочината на рязане и наклона
      Veritas Jack Rebate Plane 🪚 Премиум оборудване за дървообработка | JetTools.bg
        Склад Axminster: Доставка 10-15 раб. дни!
        Rebate & Shoulder Planes-bg

        Veritas Jack Rebate Plane

        Veritas
        717521
        1294,24 лв.
        Suitable for large rebates, fielded or bevelled panels4.8mm thick bevel-up blade, extends the full width (57mm)Makes right or left-handed corner cuts cleanly and accuratelyAdjustable scoring spurs on both sides for cross-grain185mm removable fence can be set up to 133mm from the shoulderRear tote tilts and locks to either side for knuckle...
        Veritas Round Bench Pups (Pair) 🪚 Премиум оборудване за дървообработка | JetTools.bg
          Склад Axminster: Доставка 10-15 раб. дни!
          Bench Dogs & Holdfasts-bg

          Veritas Round Bench Pups (Pair)

          Veritas
          475881
          72,18 лв.
          Made from non-corroding solid brassCombined crosshatching and 2° slope hold wood securelySide spring slides cleanly and hold Pup in placeBench Pup length 60mm, fits into any 19mm holeRecommended for benches with tops up to 50mm thickIdeal for use in bench sidesWorks well with Wonder Dog and Wonder Pup ClampsSupplied as a pairMade in Canada-bg
          Veritas Miniature Bevel-Up Jack Plane 🪚 Премиум оборудване за дървообработка | JetTools.bg
            Склад Axminster: Доставка 10-15 раб. дни!
            Рендета Bench Planes

            Veritas Miniature Bevel-Up Jack Plane

            Veritas
            106745
            275,35 лв.
            Fully functional 1/3 scale Veritas Bevel-Up Jack PlaneOnly 125mm long, 25mm wide and perfectly formedA useful size for fine trimming work on small piecesInvestment-cast stainless steel body with walnut handlesStainless-steel Norris-style adjuster for precise adjustment19mm wide A2 blade bedded at 13°Supplied in a French-fitted embossed leatherette...
            Veritas DX60 Block Planes 🪚 Премиум оборудване за дървообработка | JetTools.bg
              Склад Axminster: Доставка 10-15 раб. дни!
              Рендета Block Planes

              Veritas DX60 Block Planes

              Veritas
              717539
              842,74 лв.
              Body made of ductile cast iron, fully stressed relievedAll knobs and adjusters made from stainless steelAccurately machined and surface groundSole is flat, sides square to the sole, bed flat and square to the sidesAdjustable mouth with re-set stop180mm(7") long by 44mm(1.3/4") wide plane with 12° bed angleSupplied with a PM-V11 tool steel blade-bg
              Veritas Skew Block Plane PM-V11 🪚 Премиум оборудване за дървообработка | JetTools.bg
                Склад Axminster: Доставка 10-15 раб. дни!
                Рендета Block Planes

                Veritas Skew Block Plane PM-V11

                Veritas
                ax1050154
                782,54 лв.
                Versatile; excels at trimming rebates and planing end grainBlade flush with sides, corners are clean and accurateSkewed blade makes cutting easier; helps pull the fence into the workNorris-style adjuster guarantees precise blade settingMovable toe (fully enclosed by the body casting) adjustable mouthSkewed blade makes cutting easier and helps pull the...
                Veritas Shoulder Plane & Hand Jointer Kit 🪚 Премиум оборудване за дървообработка | JetTools.bg
                  Склад Axminster: Ограничена наличност!
                  Rebate & Shoulder Planes-bg

                  Veritas Shoulder Plane & Hand Jointer Kit

                  Veritas
                  720743
                  963,14 лв.
                  For box, model making and small partsVeritas Medium Shoulder PlaneMulti-purpose, highly accurate planeClean cuts on end grain (for example, trimming tenon shoulders)Unique lever cap with a pivoting knobSupplied with a 25° lapped blade in PM-V11 alloy steelVeritas Hand JointerTake the work to the plane rather than plane to the workLow-friction HDPE...
                  Дърводелски мини триъгълник Веритас 35 мм 🪚 Премиум оборудване за дървообработка | JetTools.bg
                    Склад Axminster: Доставка 10-15 раб. дни!
                    Дърводелски прав ъгъл

                    Дърводелски мини триъгълник Веритас 35 мм

                    Veritas
                    109383
                    27,63 лв.
                    Джобен размер 35 мм прав ъгъл с градуиране на ъглите Полезен за по-малки проекти за оформление Проверка на квадратурата в ограничени пространства Масивна анодизирана алуминиева сплав Постоянно лазерно гравиране Бяло на черно за лесно четене Ъгли, градуирани на всеки 10° Произведено в Канада
                    Дърводелски триъгълник Веритас 60mm 🪚 Премиум оборудване за дървообработка | JetTools.bg
                      Склад Axminster: Доставка 10-15 раб. дни!
                      Дърводелски прав ъгъл

                      Дърводелски триъгълник Веритас 60mm

                      Veritas
                      109384
                      33,05 лв.
                      Джобен размер 60 мм  Полезен за по-малки проекти за оформление Проверка на квадратурата в ограничени пространства Масивна анодизирана алуминиева екструзия Постоянно лазерно гравирани градуиране Бяло на черно за лесно разчитане Ъгли, градуирани на всеки 10° Произведено в Канада
                      Дърводелски триъгълник Веритас 85mm 🪚 Премиум оборудване за дървообработка | JetTools.bg
                        Склад Axminster: Доставка 10-15 раб. дни!
                        Дърводелски прав ъгъл

                        Дърводелски триъгълник Веритас 85mm

                        Veritas
                        109385
                        48,70 лв.
                        Малък размер 85 мм с градуиране на ъглите Полезен за по-малки проекти за оформление Проверка на квадратурата в ограничени пространства Масивна анодизирана алуминиева екструзия Постоянно лазерно гравирани градуиране Бяло на черно за лесно разчитане Ъгли, градуирани на всеки 10° Произведено в Канада
                        Маркиращ инструмент Веритас 🪚 Премиум оборудване за дървообработка | JetTools.bg
                          Няма наличност!
                          Маркиращи инструменти

                          Маркиращ инструмент Веритас

                          Veritas
                          ax788041
                          98,97 лв.
                          Резец от закалена стомана Реже дървесните влакна, а не разкъсва Маркира чисто, дори върху кръстоан фладер Колелото се прибира в предната част за съхранение и защита Габаритите са много лесни за настройка Използвайте за измерване на дълбочина и за пренасяне на измервания Произведено в Канада
                          Veritas Front Vices 🪚 Премиум оборудване за дървообработка | JetTools.bg
                            Склад Axminster: Доставка 10-15 раб. дни!
                            Дърводелски менгемета

                            Veritas Front Vices

                            Veritas
                            ax788046
                            287,09 лв.
                            Machined double guide rods, single-lead Acme screwsRegular front vice is 175 x 375mm(7" x 14.3/4") with a clamping capacity of 210mm(8.1/4")Large front vice is 265 x 533mm(10.1/2" x 21") with a clamping capacity of 330mm(13")Note capacity quoted is less the thickness of any wooden jaws fittedLarge front vice has an offset center screw to prevent...
                            Veritas Dovetail Saddle Markers 🪚 Премиум оборудване за дървообработка | JetTools.bg
                              Склад Axminster: Ограничена наличност!
                              Dovetail Markers-bg

                              Veritas Dovetail Saddle Markers

                              Veritas
                              ax788057
                              42,08 лв.
                              Precision machined at the traditional 1:6 & 1:8 anglesLong legs ensure accurate registrationContinuous line can be transferred around the cornerStraight and angled lines can be scribed simultaneously, ensuring alignmentInside corner is relieved to ensure flush seating even on saw whiskersAnodised aluminium, light and durable-bg
                              Veritas Steel Straight Edge 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                Няма наличност!
                                Straight Edges-bg

                                Veritas Steel Straight Edge

                                Veritas
                                ax788270
                                218,77 лв.
                                Canadian-made precision steelGround flat to within 0.025mm on both edgesStress-relieved, remains true under temp. change38mm wideStands on edge unsupported, so hands free for precise measurementHang holes, for easy storageLinished sides give a textured surface making straightedge easier to grip610 x 6.3mm (24" x 1/4") thick - 1kg915 x 9.5mm (36" x 3/8")...
                                Veritas Tapered Tenon Cutters 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                  Склад Axminster: Доставка 10-15 раб. дни!
                                  Tenon Cutters-bg

                                  Veritas Tapered Tenon Cutters

                                  Veritas
                                  ax788444
                                  178,13 лв.
                                  For putting tapered tenons on turnings, dowels or rustic furniture componentsStraight-edged blade tapers the endsSize given for each cutter is the minimum tenon diameter it will cut; the maximum is 1/2" greater3/8", 1/2" and 5/8" sizes will cover most tenoning requirements for typical chair-makingThe curved blade (for dowel making) should be used with...
                                  Veritas Power Tenon Cutters 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                    Склад Axminster: Доставка 10-15 раб. дни!
                                    Tenon Cutters-bg

                                    Veritas Power Tenon Cutters

                                    Veritas
                                    ax789004
                                    322,61 лв.
                                    Cut smooth, perfect tenons with radiused shouldersCutters run vibration-free while being driven by an electric drillYield the same accuracy when used with a hand braceAnodized aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurateThe back end of the blade is safely contoured to avoid anything extending...
                                    Veritas Mini Tenon Cutters 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                      Склад Axminster: Ограничена наличност!
                                      Tenon Cutters-bg

                                      Veritas Mini Tenon Cutters

                                      Veritas
                                      ax789017
                                      158,57 лв.
                                      Available in diameters from 5/16" to 9/16", latter used for chair rungs1/2" are useful for trellis or lattice workAll have a straight blade that cuts a 60° shoulder tenon (not a radiused shoulder tenon)5/16" size cuts tenons up to 1" long1/2" and 9/16" sizes cut tenons up to 1.3/8" longA plug gauge is included for easy blade setting, 3/8" round shankFor...
                                      Veritas Detail Rebate Planes 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                        Склад Axminster: Ограничена наличност!
                                        Model Making & Miniature Planes-bg

                                        Veritas Detail Rebate Planes

                                        Veritas
                                        ax816458
                                        245,25 лв.
                                        Ideal for cleaning up narrow grooves and dadoesUseful for small trimming tasks and planning in tight spacesAccurately machined and ground with sides are flat and squareIngenious shavings deflector helps minimise mouth chokingSolid brass, one-piece lever cap/palm rest holds the full-width blade in placeLapped O-1 tool steel bladeMade in Canada-bg
                                        Veritas HSS Lipped Brad-Point Drills 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                          Склад Axminster: Доставка 10-15 раб. дни!
                                          Brad Point Drill Bits-bg

                                          Veritas HSS Lipped Brad-Point Drills

                                          Veritas
                                          ax881038
                                          18,60 лв.
                                          Made using top-of-the-range American HSS twist drillReshaped and sharpened by Veritas in CanadaHigh speed steel stays sharp ten times longer than carbon steelPolished flutes for superior chip clearanceSharply defined lips for clean entry and smooth sidewallsDiameters conform to exacting standards of accuracy-bg
                                          Veritas Plane Blade Cases 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                            Склад Axminster: Ограничена наличност!
                                            Plane Accessories-bg

                                            Veritas Plane Blade Cases

                                            Veritas
                                            ax885529
                                            10,78 лв.
                                            Durable polypropylene blade casesOne-piece, hinged clamshell design with a locking claspBevel-up blade case for all Veritas block plane blades and bevel-up planesBevel-down case for Veritas bench, Record and Stanley bench and block planesIncludes 2 self-adhesive labels and a VCI (Vapour Corrosion Inhibitor)Made in the U.K.-bg
                                            Veritas Dowel Former 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                              Склад Axminster: Доставка 10-15 раб. дни!
                                              Dowel Cutters-bg

                                              Veritas Dowel Former

                                              Veritas
                                              ax896085
                                              132,08 лв.
                                              Make exact diameter dowels from any species of timberFor matching dowels or decorative contrast75mm diameter mounting plate has screw holes for permanent mountingSolid A2 tool steel snap-in insertsAvailable in a set (plate and the four inserts)Metric includes inserts for 6mm, 8mm, 10mm and 12mmImperial 1/4", 5/16", 3/8" and 1/2"Made in Canada-bg
                                              Veritas Parf Dogs 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                Склад Axminster: Доставка 10-15 раб. дни!
                                                Bench Dogs & Holdfasts-bg

                                                Veritas Parf Dogs

                                                Veritas
                                                ax930733
                                                52,01 лв.
                                                Stainless steel dogs for use with Festool MFT3 table, two heights availableDesigned by Peter Parfitt, manufactured by Veritas®Very useful accessory for making accurate, repeatable cutsCan be used with any guide rail and sawExcellent for attaching jigs and accessoriesFor use with Festool MFT, UJK Multifunction Workbench and UJK Parf Guide System-bg
                                                Veritas Beading Blades 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                  Склад Axminster: Ограничена наличност!
                                                  Specialist Plane Blades-bg

                                                  Veritas Beading Blades

                                                  Veritas
                                                  ax964549
                                                  75,19 лв.
                                                  Made from PM-V11® tool steelFits latest Veritas Small Plough Plane to create decorative beads3.2mm (1/8"), 4.8mm (3/16") and 6.35mm (1/4") diametersRight hand cuttingMade in CanadaPlease note: Veritas Small Plough Planes purchased before 26 February 2016 require a modified skate and depth stop upgrade in order to use beading blades-bg
                                                  Комплект за хонинговане Veritas Deluxe Mk.II 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                    Склад Axminster: Доставка 10-15 раб. дни!
                                                    Honing Guides-bg

                                                    Комплект за хонинговане Veritas Deluxe Mk.II

                                                    Veritas
                                                    101262
                                                    413,21 лв.
                                                    Most versatile Veritas honing guide set 5 piece set includes standard and narrow blade clamping heads Angle registration jig, straight roller and camber roller bases Combined heads accept blades from 3mm(1/8") to 72mm(2.7/8") wide Bases offer option of straight or slightly cambered edges Most useful sharpening aid in any workshop -bg
                                                    Veritas Plunge Base for Rotary Multi-Tools 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                      Склад Axminster: Ограничена наличност!
                                                      Attachments for Rotary Multi-Tools-bg

                                                      Veritas Plunge Base for Rotary Multi-Tools

                                                      Veritas
                                                      102163
                                                      243,15 лв.
                                                      Fits any tool with 3/4" x 12 tpi threaded collar, as standard on Dremel and othersConverts almost any rotary multi-tool into a miniature plunge routerLock lever for continuous cutsMicro-adjustable depth stop gives precise control100 x 75mm footprint, easy to position and manoeuvreAluminium with stainless steel rods and knobsMade in Canada-bg
                                                      Veritas Small Plough Plane 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                        Склад Axminster: Доставка 10-15 раб. дни!
                                                        Plough Planes-bg

                                                        Veritas Small Plough Plane

                                                        Veritas
                                                        102332
                                                        782,24 лв.
                                                        Excels at cutting grooves, rebates, tongues and beads168mm (6-5/8") long fence registers solidly to the workpieceDouble guide rods and collet locking system prevent fence from rackingLarge wooden rear tote offers a solid, comfortable gripDuctile cast-iron body; 225mm (9") long12.7mm (1/2") deep maximum depth of groove or rebateSupplied with a 6.35mm...
                                                        Veritas Miniature Bench Plane 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                          Склад Axminster: Доставка 10-15 раб. дни!
                                                          Рендета Bench Planes

                                                          Veritas Miniature Bench Plane

                                                          Veritas
                                                          103550
                                                          179,03 лв.
                                                          Fully functional 1/3 scale Veritas Bevel-Up Smoothing PlaneOnly 90mm long and 20.5mm wideFitted with A2 tool steel bladeNorris-style adjuster for micro precision depth of cutInvestment-cast stainless steel bodyCNC machined sides and finely ground soleFront knob and rear tote are hardwoodSupplied in French-fitted leatherette case-bg
                                                          Veritas Маркиращ инструмент с микро настройка 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                            Склад Axminster: Доставка 10-15 раб. дни!
                                                            Маркиращи инструменти

                                                            Veritas Маркиращ инструмент с микро настройка

                                                            Veritas
                                                            104388
                                                            154,05 лв.
                                                            Механизъм за фино регулиране с обхват 6 мм Алуминиево тяло с месингова повърхност, прът от неръждаема стомана Колело за рязане от закалена стомана Позицията на режещия инструмент позволява използването му като дълбокомер Обща дължина 170 mm Произведено в Канада
                                                            Veritas Panel Platform Kit 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                              Склад Axminster: Ограничена наличност!
                                                              Bench Dogs & Holdfasts-bg

                                                              Veritas Panel Platform Kit

                                                              Veritas
                                                              105157
                                                              81,21 лв.
                                                              Make a platform for cutting sheet materialA must-have when using a handheld circular sawRapidly assembled, portable when not in useRaises material, allowing blade to pass through safelyForms a strong and stable platform for 2,400 x 1,200 (8x4) sheetsIncludes tough nylon bag for transport and storageUse on site or in the workshopKit comprises 12 saddles...
                                                              Veritas Platform Saddles 2" x 4" 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                Склад Axminster: Доставка 10-15 раб. дни!
                                                                Bench Dogs & Holdfasts-bg

                                                                Veritas Platform Saddles 2" x 4"

                                                                Veritas
                                                                105159
                                                                39,07 лв.
                                                                Make a sacrificial standoff to protect bench topPrevents power tool blades from contacting surfaceUse when sawing, drilling, jigsawing etcTough reusable polypropylene mouldingsRemovable post fits 3/4" and 20mm dog holesUse on site or in the workshopComprises 4 saddles for prepared 2 x 4 timberTimber not included-bg
                                                                Veritas Mk.II Honing System 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                  Склад Axminster: Доставка 10-15 раб. дни!
                                                                  Honing Guides-bg

                                                                  Veritas Mk.II Honing System

                                                                  Veritas
                                                                  200810
                                                                  198,60 лв.
                                                                  Increased range, capacity and accuracyIntegral blade registration squares the blade and sets the bevel angle in one easy stepThree bevel-angle range configurationsDesigned to accept flat and tapered blades, as well as blades with irregular geometryThree-position eccentric roller allows a micro-bevel to be honed quickly and accurately50mm wide roller is...
                                                                  Veritas Dovetail Saw 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                    Склад Axminster: Доставка 10-15 раб. дни!
                                                                    Dovetail & Gents Saws-bg

                                                                    Veritas Dovetail Saw

                                                                    Veritas
                                                                    210923
                                                                    270,24 лв.
                                                                    Spine permanently moulded onto the bladeRight amount of weight to carry the saw effortlessly into the cutEnsures control where accuracy is most importantPolished hardwood handle is shaped to fit the hand comfortablyMortice and tenon joint between handle & back for solid and secure fixingJapanese high carbon steel blade, 230mm (9") long by 40mm...
                                                                    Veritas Side Rebate Plane 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                      Склад Axminster: Ограничена наличност!
                                                                      Rebate & Shoulder Planes-bg

                                                                      Veritas Side Rebate Plane

                                                                      Veritas
                                                                      211005
                                                                      524,88 лв.
                                                                      Use for cleaning up, fine fitting or trimming of rebates and groovesDual-blade configurationIngenious pivoting handle for right or left-hand useUse in slots as narrow as 4.8mmToe is removable for use in a stopped dado115mm long, weight 450gDuctile cast iron body with O1 tool steel blades (HRC 58-60)Made in Canada-bg
                                                                      Veritas Shelf-Drilling Jig 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                        Изчерпано
                                                                        Водачи и приспособления за пробиване

                                                                        Veritas Shelf-Drilling Jig

                                                                        Veritas
                                                                        474283
                                                                        470,10 лв.
                                                                        Ensures holes exactly opposite and equally spacedTwin-register pins in the rails fit into holes already drilledRegister pins have tapered tips24" rails each have 20 holes drilled at 1" intervalsBush carrier registers perfectly in hole and is easily movedHoles drilled at 90° as hardened bushings are 13/16" long10 hole sizes can be drilled with the standard...
                                                                        Вижте
                                                                        Veritas Dowelling Jig 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                          Склад Axminster: Ограничена наличност!
                                                                          Dowel Jigs & Accessories-bg

                                                                          Veritas Dowelling Jig

                                                                          Veritas
                                                                          474668
                                                                          328,93 лв.
                                                                          For centred dowelling or doweling boards to a reference faceMicrometer clamp head can be set from 6 to 13mm from the centre lineSetting is positive and accurate to a few thousands of an inchMovable clamp heads will grip work as small as 13mm x 35mmChain drill dowel holes using the tapered pin to register off the last hole drilledMovable bushing carrier...
                                                                          Veritas Cabinet Scraper 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                            Склад Axminster: Ограничена наличност!
                                                                            Cabinet Scrapers-bg

                                                                            Veritas Cabinet Scraper

                                                                            Veritas
                                                                            474843
                                                                            334,65 лв.
                                                                            Smoothes glue lines or surfaces without tear-out, digs or gougesAllows pressure to be applied directly in line with the cutting edge70mm wide blade, with both cutting edges ground at 45°Shaped to protect the upward-facing cutting edgeSole is surface ground for accuracy (80 x 85mm)Made from ductile cast ironOverall length 290mm. Weighs about 740gMade in...
                                                                            Veritas Panel Clamp 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                              Склад Axminster: Доставка 10-15 раб. дни!
                                                                              Панелни стяги

                                                                              Veritas Panel Clamp

                                                                              Veritas
                                                                              475209
                                                                              169,70 лв.
                                                                              Eliminates bowed panels by exerting balanced tension on clamp barsThe greater the pressure, the more rigid the bars becomeSerrated posts grip the wooden clamp barsKeeps panels flat under any pressure without allowing bars to liftTightens by hand and the system is stackable for production workClamp from 16 mm to 50 mm thick while keeping clamp pads centred...
                                                                              Veritas Sliding Square 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                Склад Axminster: Доставка 10-15 раб. дни!
                                                                                Layout Tools-bg

                                                                                Veritas Sliding Square

                                                                                Veritas
                                                                                475300
                                                                                122,45 лв.
                                                                                Use to lay out or transfer measurementsSimplifies working in two axesReduces error when marking 2 dimensionsStainless-steel blade is 75mm wide and 150mm longMachine ground on all four edges.Metric graduated to 100mm on sides and end to 70mmBlade cut-out holds pencil for parallel linesHardened steel reference pins set in bodyMade in Canada-bg
                                                                                Veritas Small Blade Holder 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                  Склад Axminster: Доставка 10-15 раб. дни!
                                                                                  Honing Guides-bg

                                                                                  Veritas Small Blade Holder

                                                                                  Veritas
                                                                                  475978
                                                                                  68,87 лв.
                                                                                  Blade holder may be mounted in a honing guide, or used free hand for sharpeningHolds short blades such as spokeshave blades when sharpeningBlade is secured in holder by two rare-earth magnetsAdjustable stop provides adjustment for blade projectionEffectively transforms your short blade into something larger (38 x 100mm long)Made in Canada-bg
                                                                                  Veritas Steel Honing Plate 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                    Склад Axminster: Ограничена наличност!
                                                                                    Diamond Sharpening Stones-bg

                                                                                    Veritas Steel Honing Plate

                                                                                    Veritas
                                                                                    502403
                                                                                    120,34 лв.
                                                                                    Precision ground to a flatness tolerance of 0.127mm (0.005")An excellent substrate for diamond paste (available separately)Dimensionally stable low carbon steelStays flat over a lifetime of ordinary useSlight surface texture captures diamond gritSofter steel and diamond particles form a durable, fast cutting abrasive surfaceSize 204 x 76 x 9.5mm, weighs...
                                                                                    Set of 3 Veritas Miniature Planes 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                      Склад Axminster: Доставка 10-15 раб. дни!
                                                                                      Specialist Planes-bg

                                                                                      Set of 3 Veritas Miniature Planes

                                                                                      Veritas
                                                                                      717151
                                                                                      421,34 лв.
                                                                                      Weight only 48g, 62mm long by 6.3mm wideFully functional, easy to manoeuvre and controlEffective for fine trimming or cleaning the bottoms of narrow dadosStainless steel body accurately machined and surface groundStainless steel Norris-style adjusterA2 tool steel blade (1.5mm thick)Ideal for hardware installation, fine inlay or intarsia work3.2mm wide A2...
                                                                                      Veritas Crosscut & Fine Tooth Dovetail Saw - PACKAGE DEAL 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                        Изчерпано
                                                                                        Dovetail & Gents Saws-bg

                                                                                        Veritas Crosscut & Fine Tooth Dovetail Saw - PACKAGE DEAL

                                                                                        Veritas
                                                                                        717451
                                                                                        511,64 лв.
                                                                                        0.5mm thick high-carbon steel with 16 teeth per 25mm (16tpi)Injection moulded back creates a solid one-piece blade/spine/mount assemblyBrass nut secures comfortable hardwood handleSaw cuts easily and stays trueOverall length 360mm (14.1/4")Premium fine-tooth dovetail saw 20 teeth per 25mm (20tpi blade)235mm (9.1/4") long by 0.5mm thick high-carbon steel...
                                                                                        Вижте
                                                                                        Veritas Mk.II Honing System and Camber Roller - PACKAGE DEAL 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                          Склад Axminster: Доставка 10-15 раб. дни!
                                                                                          Honing Guides-bg

                                                                                          Veritas Mk.II Honing System and Camber Roller - PACKAGE DEAL

                                                                                          Veritas
                                                                                          717456
                                                                                          270,84 лв.
                                                                                          Increased range, capacity and accuracyIntegral blade registration squares the blade and sets the bevel angle in one easy stepThree bevel-angle range configurationsDesigned to accept flat and tapered blades, as well as blades with irregular geometryThree-position eccentric roller allows a micro-bevel to be honed quickly and accurately50mm wide roller is...
                                                                                          Veritas 12" Tapered Snug Plug Cutter & Flush Cutting Saw - PACKAGE DEAL 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                            Склад Axminster: Ограничена наличност!
                                                                                            Plug Cutters & Plugs-bg

                                                                                            Veritas 12" Tapered Snug Plug Cutter & Flush Cutting Saw - PACKAGE DEAL

                                                                                            Veritas
                                                                                            717578
                                                                                            135,39 лв.
                                                                                            Snug plug cutters cut a slightly tapered plug1/2" CutterFlares out at 3° angleFour cutting flutesExcellent for cutting projecting dowels or plugsSingle edged 26tpi with no setJapanese style tooth patternFlexible blades cut on the pull strokeOverall length 290mm(11.1/2") with 120mm(4.3/4") blade-bg
                                                                                            Veritas Super-Hard Milled Scrapers & Variable Burnisher - PACKAGE DEAL 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                              Изчерпано
                                                                                              Cabinet Scrapers-bg

                                                                                              Veritas Super-Hard Milled Scrapers & Variable Burnisher - PACKAGE DEAL

                                                                                              Veritas
                                                                                              717713
                                                                                              180,54 лв.
                                                                                              Hardened to HRC 48-52 to hold an edge longerEdges are carefully milled to a square, sharp 90°Prepared edges save time and effort of filing and stoningComes in set of four50 x 150 x 0.4 & 0.6mm for fine work60 x 150 x 0.8 & 1mm for heavier stock1mm scraper suitable for paint removalMakes raising a burr an easy jobCarbide rods fixed at an angle in...
                                                                                              Вижте
                                                                                              Veritas двоен разчертаващ инструмент и Скоба Veritas
                                                                                                Склад Axminster: Доставка 10-15 раб. дни!
                                                                                                Маркиращи инструменти

                                                                                                Двоен разчертаващ инструмент Veritas и Скоба Veritas

                                                                                                Veritas
                                                                                                717714
                                                                                                180,54 лв.
                                                                                                Veritas Двоен разчертаващ уредЗакалени стоманени резци тип колелцеРежат влакната, без да ги късатОставят чиста линия, дори напречно на влакнатаРезците се прибират в главата за защита и съхранениеМного лесна настройкаПроизведено в КанадаVeritas скоба за двойния разчертаващ уредЗаключва разстоянието между...
                                                                                                Veritas 10mm Tapered Snug Plug Cutter & Flush Cutting Saw - PACKAGE DEAL 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                                  Склад Axminster: Доставка 10-15 раб. дни!
                                                                                                  Plug Cutters & Plugs-bg

                                                                                                  Veritas 10mm Tapered Snug Plug Cutter & Flush Cutting Saw - PACKAGE DEAL

                                                                                                  Veritas
                                                                                                  717718
                                                                                                  135,39 лв.
                                                                                                  Snug plug cutters cut a slightly tapered plugFlares out at 3° angleFour cutting flutesExcellent for cutting projecting dowels or plugsDouble edged 22tpi with teeth set one wayJapanese style tooth patternFlexible blades cut on the pull strokeOverall length 290mm(11.1/2") with 120mm(4.3/4") bladeMade in Canada-bg
                                                                                                  Veritas Small Plough Plane With Five A2 blades 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                                    Склад Axminster: Доставка 10-15 раб. дни!
                                                                                                    Plough Planes-bg

                                                                                                    Veritas Small Plough Plane With Five A2 blades

                                                                                                    Veritas
                                                                                                    717954
                                                                                                    978,19 лв.
                                                                                                    Supplied with five A2 blades from 3.2mm(1/8") to 9.5mm(3/8")Excels at cutting grooves, rebates, tongues and beadsDouble guide rods and collet locking system prevent fence from rackingLarge wooden rear tote offers a solid, comfortable gripDuctile cast iron body; 225mm(9") long12.7mm(1/2") deep maximum depth of groove or rebateMade in Canada-bg
                                                                                                    Veritas Miniature Shoulder Plane 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                                      Налично София
                                                                                                      Model Making & Miniature Planes-bg

                                                                                                      Veritas Miniature Shoulder Plane

                                                                                                      Veritas
                                                                                                      952802
                                                                                                      156,46 лв.
                                                                                                      Weight only 48g, 63.5mm long by 6.3mm wideFully functional, easy to manoeuvre and controlEffective for fine trimming or cleaning the bottoms of narrow dadosStainless steel body accurately machined and surface groundStainless-steel Norris-style adjusterA2 tool steel blade (1.5mm thick)Supplied in a French-fitted embossed leatherette boxMade in Canada-bg
                                                                                                      Veritas Precision Square Metric 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                                        Склад Axminster: Доставка 10-15 раб. дни!
                                                                                                        Дърводелски прав ъгъл

                                                                                                        Veritas Precision Square Metric

                                                                                                        Veritas
                                                                                                        952847
                                                                                                        166,09 лв.
                                                                                                        As accurate as an engineer's square (0.025mm per 25mm of length)Four ground edges are ground graduations on all sides and edgesUse for general layout and checkingA great tool for machine set-upEngineer’s corner ensures the square seats correctlyHigh carbon steel, hard chrome plating, etched and filled metric markingsMade in USA-bg
                                                                                                        Двоен разчертаващ инструмент Veritas 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                                          Налично София
                                                                                                          Маркиращи инструменти

                                                                                                          Двоен разчертаващ инструмент Veritas

                                                                                                          Veritas
                                                                                                          952906
                                                                                                          164,59 лв.
                                                                                                          Veritas Двоен разчертаващ уредЗакалени стоманени резци тип колелцеРежат влакната, без да ги късатОставят чиста линия, дори напречно на влакнатаРезците се прибират в главата за защита и съхранениеМного лесна настройкаПроизведено в Канада
                                                                                                          Veritas Small Shoulder Planes 🪚 Премиум оборудване за дървообработка | JetTools.bg
                                                                                                            Склад Axminster: Ограничена наличност!
                                                                                                            Rebate & Shoulder Planes-bg

                                                                                                            Veritas Small Shoulder Planes

                                                                                                            Veritas
                                                                                                            717524
                                                                                                            722,34 лв.
                                                                                                            Fits comfortably in the handDuctile cast iron body is accurately machined and finely groundSole and sides are flat and squareMicro-adjustable toe allows very fine setting of the mouthLow bed angle giving exceptionally clean end-grain cuttingSet screws ensure the blade is perfectly flushSole is 155mm long by 12.7mm wideLapped blade is 3.2mm thick in PM-V11...
                                                                                                            Показване на 1 - 295 на 295 елемент(и)
                                                                                                            Филтриране по
                                                                                                            Категории
                                                                                                            Цена
                                                                                                            лв. лв.
                                                                                                            Filter
                                                                                                            Product added to compare.
                                                                                                            Продуктът е добавен в списъка с желания