Block Planes-bg

Показани са 1-21 от общо 21 артикул(а)

Axminster No. 220 Block Plane

Block Planes-bg

Axminster No. 220 Block Plane

Modelled on the traditional Stanley 220 designKnurled brass depth adjustment screwCam locking lever cap and lateral adjustmentBlade width 40mm(1.5/8")(1.5/8")-bg

View

Axminster Rider Limited...

Block Planes-bg

Axminster Rider Limited Edition No. 69.1/2 Block Plane

Limited Edition with stainless steel knuckle joint capCap applies pressure, minimising possibility of chatterEliminates lateral shifting of blade when locking capPlane body cast from high quality ductile iron41mm wide blade bedded at 13.5° low angleThick O1 steel blade, HRC 63 for excellent edge retentionAdjustable mouth and micro-fine depth feed give...

View

Axminster Rider No. 60 1/2...

Block Planes-bg

Axminster Rider No. 60 1/2 Deluxe Block Plane

Solid cast and polished bronze capBronze gives a little extra heft and comfort in the handMicro-adjustable depth of cut for complete controlSole ground to ± 0.04mm (0.0016")Honed 3mm thick, O1 high carbon steel bladeSupplied with a plane sock for protection-bg

View

Axminster Rider No. 60 1/2...

Block Planes-bg

Axminster Rider No. 60 1/2 Low Angle Block Plane

Blade seated at an angle of 13.5°, useful for end grain workAdjustable mouth for fine or coarser workMicro-adjustable depth of cut for complete controlSole ground to ± 0.04mm (0.0016")Honed 3mm thick, O1 high carbon steel bladeSupplied with a plane sock for protection-bg

View

Axminster Rider No. 69 1/2...

Block Planes-bg

Axminster Rider No. 69 1/2 Deluxe Low Angle Block Plane

A deluxe, hybrid plane incorporating the best of both its parentsLow blade angle of the 60.1/2, (13.5°) with the width of a 9.1/2 (41mm)Thick O1 steel blade, holds its edge and reduces chatterAdjustable mouth and a fine depth feed give great controlCast and polished solid bronze cap, adds comfort and heftSolid brass fittings for smooth adjustment-bg

View

Axminster Rider No. 9 1/2...

Block Planes-bg

Axminster Rider No. 9 1/2 Deluxe Block Plane

A real workhorse, used for innumerable planing and trimming jobsCast and polished solid bronze cap, adds weight and feelAccurately machined cast iron body, solid brass fittings,Adjustable mouth, narrow for fine work, wide for thicker shavings155mm(6-1/8") long, blade width is 41mm(1-5/8"), 20° blade angleThick, O1 steel blade, minimises risk of chatter-bg

View

Axminster Rider No. 9 1/2...

Block Planes-bg

Axminster Rider No. 9 1/2 Standard Block Plane

Blade seated at an angle of 20°, bevel uppermostAdjustable mouth for fine or coarser workMicro-adjustable depth of cut for complete controlSole ground to ± 0.04mm (0.0016")Honed 3mm thick, O1 high carbon steel bladeSupplied with a plane sock for protection-bg

View

Axminster Rider Special...

Block Planes-bg

Axminster Rider Special Edition No. 220 Block Plane

Special Edition PlaneMost useful general-purpose block planeQuality ductile iron, CNC machinedSole square to sides and ground flatMicro depth control and lateral adjustmentBlade width 41mm (1.5/8")Sole is 160mm long x 52mm wide-bg

View

Bridge City HP-8 Mini Block...

Block Planes-bg

Bridge City HP-8 Mini Block Plane

Small block plane with adjustable depth skidsHigh precision, accurate thicknessing to within 0.025mmPerfect for preparing and dimensioning small componentsMaximum width 28.5mm, maximum thickness 22mmBody of aircraft-grade aluminium, CNC milled and anodisedA2 blade, 26mm wide and 2.5mm thick, 60-62 HRCBack of blade optically lappedPlane body 94mm long and...

View

Bridge City HP-9v2 Dual...

Block Planes-bg

Bridge City HP-9v2 Dual Angle Block Plane

An heirloom for future generations of woodworkersSuperbly engineered combination of form and function2 tools in one, standard and low angle block planes4.76mm thick, double edged bladeHighly precise, modified Norris blade adjustmentUnique depth skids allow accurate thicknessingDouble-sided guide fence, square and 45° chamferA beautiful example of tool...

View

Lie-Nielsen No. 102 Block...

Block Planes-bg

Lie-Nielsen No. 102 Block Plane

32mm(1.1/4")-bg

View

Lie-Nielsen No. 102 Block...

Block Planes-bg

Lie-Nielsen No. 102 Block Plane

32mm(1.1/4")Set at a perfect angle for end grainPrecise set-up with stainless steel micrometer adjusterFits perfectly in the palm of your hand-bg

View

Lie-Nielsen No. 60 1/2 Low...

Block Planes-bg

Lie-Nielsen No. 60 1/2 Low Angle Block Plane

Movable shoe in front of the blade to control the width of the mouthLow blade angle 12.5°, perfect for end grain3.2mm(1/8") thick blade, minimises chatterCryogenically treated A-2 tool steel blade, stays sharper longer158mm(6.1/4") long x 35mm(1.3/8") wide base-bg

View

Lie-Nielsen No. 60 1/2RN...

Block Planes-bg

Lie-Nielsen No. 60 1/2RN Rebating Block Plane

Open sided for cutting, cleaning up or adjusting small rebatesCryogenically treated blade, for a better longer lasting edgeFull width blade 44mm(1.3/4")Fitted with a nicker for cross grain workLow angle blade functions well on both long and end grain-bg

View

Veritas Apron Planes

Block Planes-bg

Veritas Apron Planes

Ideal for trim carpentryDuctile cast iron bodyUnique side wings allow for a comfortable firm gripCombined feed and lateral adjustment mechanism makes setting easy and accurateSupplied with a choice of 01 or PM-V11 tool steel blade-bg

View

Veritas DX60 Block Planes

Block Planes-bg

Veritas DX60 Block Planes

Body made of ductile cast iron, fully stressed relievedAll knobs and adjusters made from stainless steelAccurately machined and surface groundSole is flat, sides square to the sole, bed flat and square to the sidesAdjustable mouth with re-set stop180mm(7") long by 44mm(1.3/4") wide plane with 12° bed angleSupplied with a choice of O1 or PM-V11 tool steel...

View

Veritas Inset Plane

Block Planes-bg

Veritas Inset Plane

Insets into a self-made wooden plane bodyAllows full control over the shape and function of the finished planeIdeal for making a chamfer plane to a specific angle.Cast stainless-steel body with hand finished soleFits into a 43mm x 19mm mortice12mm wide A2 tool steel bladeCan be used alone as a finger planeMade in Canada-bg

View

Veritas Low Angle Block Planes

Block Planes-bg

Veritas Low Angle Block Planes

Ideal for working end grainFinger grips in each side for better controlCombined blade advance and lateral adjustmentDuctile cast iron bodyAvailable with O1 or PM-V11 25° tool steel blade-bg

View

Veritas Miniature Low Angle...

Block Planes-bg

Veritas Miniature Low Angle Block Plane

Weight only 48g, 60mm long by 19mm wideFully functional, easy to manoeuvre and controlCast stainless steel bodyAccurately machined and surface groundStainless steel Norris-style adjusterA2 tool steel blade (1.5mm thick)Supplied in a French-fitted embossed leatherette boxMade in Canada-bg

View

Veritas Skew Block Plane

Block Planes-bg

Veritas Skew Block Plane

Blade flush with the planes side, so corners are clean and accurateNorris-style adjuster guarantees precise blade settingMovable toe (fully enclosed by the body casting) adjustable mouthVersatile plane excels at trimming rebates and planing end grainSkewed blade makes cutting easier and helps pull the fence into the workAvailable in left- and right-hand...

View

Veritas Standard Block Planes

Block Planes-bg

Veritas Standard Block Planes

Excellent plane for general purpose workDuctile cast iron bodyComfortable to hold with a nice weight and balanceEffective cutting angle of 45°Supplied with a choice of 01 or PM-V11 tool steel blade-bg

View

Продуктът е добавен в Любими

Добавени продукти за сравнение.

Jettools. bg използва бисквитки (cookies). Ползвайки уебсайта, Вие се съгласявате с нашата Политика за кукита. Прочети повече