Rebate & Shoulder Planes-bg

Veritas Skew Rebate Planes Veritas Skew Rebate Planes 2
Наличност
Rebate & Shoulder Planes-bg

Veritas Skew Rebate Planes

Veritas
ax791600
569,00 лв.
Skewed blade reduces cut resistance, aids in shaving clearanceCorner cut is clean and accurateScoring spur sits ahead of the blade, reduces tear-out on cross-grainDouble guide rods and a collet locking system prevent the fence from rackingFence allows a maximum rabbet width of 38mmAdjustable shoe for depth of cut to a maximum 19mm (shoe removable for...
Veritas Small Shoulder Planes Veritas Small Shoulder Planes 2
Наличност
Rebate & Shoulder Planes-bg

Veritas Small Shoulder Planes

Veritas
ax932291
391,00 лв.
Fits comfortably in the handDuctile cast iron body is accurately machined and finely groundSole and sides are flat and squareMicro-adjustable toe allows very fine setting of the mouthLow bed angle giving exceptionally clean end-grain cuttingSet screws ensure the blade is perfectly flushSole is 155mm long by 12.7mm wideLapped blade is 3.2mm thick in O1 or...
Veritas Medium Shoulder Planes Veritas Medium Shoulder Planes 2
Наличност
Rebate & Shoulder Planes-bg

Veritas Medium Shoulder Planes

Veritas
ax932292
448,00 лв.
Multi-purpose toolCan be used on end grain (for example, trimming tenon shoulders)Unique lever cap with a pivoting knobSupplied with a 25° lapped blade in O1 or PM-V11 alloy steel-bg
Veritas Large Shoulder Planes Veritas Large Shoulder Planes 2
Наличност
Rebate & Shoulder Planes-bg

Veritas Large Shoulder Planes

Veritas
ax932293
515,00 лв.
The largest in the Veritas range of shoulder planesIdeal for trimming breadboard tenons, adjusting shoulders, paring down tenon cheeksHardwood lever cap knob that pivots 180°Multi-positional front knob can be mounted on the top or on either sideSupplied with a 25° lapped blade in O1 or PM-V11 tool steel-bg
Veritas Bullnose Planes Veritas Bullnose Planes 2
Наличност
Rebate & Shoulder Planes-bg

Veritas Bullnose Planes

Veritas
ax932294
408,00 лв.
Two planes in oneRemovable nose sectionChoice of blade options in O1 or PM-V11 alloy-bg
Veritas Jack Rebate Planes Veritas Jack Rebate Planes 2
Наличност
Rebate & Shoulder Planes-bg

Veritas Jack Rebate Planes

Veritas
ax932297
857,00 лв.
Suitable for large rebates, fielded or bevelled panels4.8mm thick bevel-up blade, extends the full width (57mm)Makes right or left-handed corner cuts cleanly and accuratelyAdjustable scoring spurs on both sides for cross-grain185mm removable fence can be set up to 133mm from the shoulderRear tote tilts and locks to either side for knuckle...
Veritas Side Rebate Plane Veritas Side Rebate Plane 2
Наличност
Rebate & Shoulder Planes-bg

Veritas Side Rebate Plane

Veritas
211005
283,00 лв.
Use for cleaning up, fine fitting or trimming of rebates and groovesDual-blade configurationIngenious pivoting handle for right or left-hand useUse in slots as narrow as 4.8mmToe is removable for use in a stopped dado115mm long, weight 450gDuctile cast iron body with O1 tool steel blades (HRC 58-60)Made in Canada-bg
Lie-Nielsen No. 073 Large... Lie-Nielsen No. 073 Large... 2
Наличност
Rebate & Shoulder Planes-bg

Lie-Nielsen No. 073 Large Shoulder Plane

Lie-Nielsen
421040
646,00 лв.
Highly accurate plane for fine cabinet makingDuctile iron body, precision ground, sides and base squareAdjustable mouth for the thinnest of shavingsA2 tool steel cryogenically treated blade really holds its edge210mm(8.1/4") long with a blade 32mm(1.1/4") wide-bg
Lie-Nielsen No. 10 1/4... Lie-Nielsen No. 10 1/4... 2
Наличност
Bench Planes-bg

Lie-Nielsen No. 10 1/4 Bench Rebate Plane

Lie-Nielsen
421051
969,00 лв.
A fine tool with excellent balanceFitted with a nicker, to produce a clean, square, vertical cutHandle and knob tilt to either side for accessibility in a corner cut.Ductile iron body, A2 cryogenically treated bladeBedrock style bronze frog324mm(12.3/4") long and 53mm(2.1/8) wide-bg
Axminster Rider No. 90... Axminster Rider No. 90... 2
Наличност
Rebate & Shoulder Planes-bg

Axminster Rider No. 90 Bullnose Plane

Axminster Rider
506565
174,00 лв.
Made with great attention to detail, carefully finished and polished100mm long, precision ground, sole is flat and sides square to the soleMicro adjustable 25.4mm(1") full width bladeHoned, O1 high carbon steel bladeMovable upper section to vary the width of the mouthConverts into a chisel plane, useful for cleaning stopped rebates-bg
Axminster Rider No. 92... Axminster Rider No. 92... 2
Наличност
Rebate & Shoulder Planes-bg

Axminster Rider No. 92 Shoulder Plane

Axminster Rider
506566
174,00 лв.
Highly accurate, 19mm(3/4") wide shoulder plane, 132mm(5-3/16") long basePrecision machined, precision ground for accurate resultsSole is flat and the sides are square to the soleMovable front section varies the width of the mouth for coarse or fine workRemoving the front section allows use as a chisel planeFull width blade, micro adjustable depth of cut-bg
Axminster Rider 3-in-1 Plane Axminster Rider 3-in-1 Plane 2
Наличност
Rebate & Shoulder Planes-bg

Axminster Rider 3-in-1 Plane

Axminster Rider
506567
212,00 лв.
A versatile plane offering 3 distinct functionsShoulder plane with front extension fittedBull nose plane using the small nose sectionChisel plane with nose removedSupplied with shims to vary the width of the mouthSole is 155mm(6-1/8") long, with 27mm(1-1/6") full width blade-bg
Axminster Rider 2-in-1 Plane Axminster Rider 2-in-1 Plane 2
Наличност
Rebate & Shoulder Planes-bg

Axminster Rider 2-in-1 Plane

Axminster Rider
506568
165,00 лв.
Combination of bull nose plane and chisel planeComfortable solid cast bronze lever110mm(4-5/16") long sole by 27mm(1-1/16") wide, fine cast iron bodyFull width blade, ideal for cleaning rebatesKnurled fine adjustment screw for depth controlSupplied with shim to vary the width of the mouth-bg
Axminster Rider No. 778... Axminster Rider No. 778... 2
Наличност
Rebate & Shoulder Planes-bg

Axminster Rider No. 778 Duplex Rebate Plane

Axminster Rider
506571
228,00 лв.
Deigned to cut rebates up to 38mm(1-1/2") wideAdjustable fence solidly supported on twin guide rodsFence fits to either side of the planeTwo positions for the blade enhances the versatility of this planeSupplied with a spur for cross grain cutting and a depth stopFine blade adjustment gives precise control of the depth of cut-bg
Lie-Nielsen No. 041 Small... Lie-Nielsen No. 041 Small... 2
Наличност
Rebate & Shoulder Planes-bg

Lie-Nielsen No. 041 Small Shoulder Plane

Lie-Nielsen
701264
426,00 лв.
Cast ductile iron body, manganese bronze capAdjustable mouthBlade bedded at 18°Blade is A2 cryogenically treated-bg
Veritas Miniature Shoulder... Veritas Miniature Shoulder... 2
Наличност
Model Making & Miniature Planes-bg

Veritas Miniature Shoulder Plane

Veritas
952802
99,00 лв.
Weight only 48g, 63.5mm long by 6.3mm wideFully functional, easy to manoeuvre and controlEffective for fine trimming or cleaning the bottoms of narrow dadosStainless steel body accurately machined and surface groundStainless-steel Norris-style adjusterA2 tool steel blade (1.5mm thick)Supplied in a French-fitted embossed leatherette boxMade in Canada-bg
Veritas Small Shoulder Planes Veritas Small Shoulder Planes 2
Наличност
Rebate & Shoulder Planes-bg

Veritas Small Shoulder Planes

Veritas
717524
447,00 лв.
Fits comfortably in the handDuctile cast iron body is accurately machined and finely groundSole and sides are flat and squareMicro-adjustable toe allows very fine setting of the mouthLow bed angle giving exceptionally clean end-grain cuttingSet screws ensure the blade is perfectly flushSole is 155mm long by 12.7mm wideLapped blade is 3.2mm thick in PM-V11...
Veritas Medium Shoulder Planes Veritas Medium Shoulder Planes 2
Наличност
Rebate & Shoulder Planes-bg

Veritas Medium Shoulder Planes

Veritas
717527
473,00 лв.
Multi-purpose toolCan be used on end grain (for example, trimming tenon shoulders)Unique lever cap with a pivoting knobSupplied with a 25° lapped blade in PM-V11 alloy steel-bg
Продуктът е добавен в Любими
Добавени продукти за сравнение.

 Jettools. bg използва бисквитки (cookies). Ползвайки уебсайта, Вие се съгласявате с нашата Политика за кукита. Прочети повече