Длета

Показани са 1-24 от общо 43 артикул(а)

Наличност

Bevel Edge Chisel Sets-bg

Crown Butt Chisel Sets

Crown

ax19725

203,00 лв.

Short, compact and controllableFully polished front and backWell shaped, hardwood handle and solid brass ferrule4 piece set: 1/4", 1/2", 3/4" and 1"7 piece set: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8" and 1"-bg

Наличност

Bevel Edge Chisels-bg

Kirschen 1002 Bevel Edge Chisels

Kirschen

ax22470

46,00 лв.

Ground and fully polished high carbon steel bladeTraditional octagonal hornbeam handleTop and bottom ferruleHammer button fitted on top-bg

Наличност

Bevel Edge Chisels-bg

Japanese Oire Nomi Chisels

Ice Bear

ax22847

98,00 лв.

Edge hardened to over HRC 65White Paper #2 steel, laminated to softer backingOverall length approximately 230mmLonger shoulders and tangsRed oak handles with steel hoopsHandle top mushroomed ready to go-bg

Наличност

Paring Chisels-bg

Henry Taylor Long Thin Bevel Edge Paring Chisels

Henry Taylor

ax23546

86,00 лв.

Blade tapers towards cutting edgeBack carefully ground flat190mm (7.1/2") blade-bg

Наличност

Bevel Edge Chisels-bg

Lie-Nielsen Bevel Edge Socket Chisels

Lie-Nielsen

ax460348

142,00 лв.

Far stronger than tanged chiselsSelected Hornbeam handles230mm longComfortable in the hand with excellent balanceBlades are made of A-2 Tool Steel, hardened to Rockwell 60-62Cryogenically treated and double tempered-bg

Наличност

Mortice Chisels-bg

Lie-Nielsen Cabinetmaker's Mortice Chisels

Lie-Nielsen

ax460393

168,00 лв.

Designed for the cabinetmakerWell balanced mortice chiselsGround with parallel sidesHandles of tough hornbeam heartwoodBlades are hardened to Rockwell 60-62-bg

Наличност

Paring Chisels-bg

Kirschen S-Form Paring Chisel

Kirschen

ax480157

54,00 лв.

Double curved handle which raises the handle by about 40mm above the workHornbeam handles-bg

Наличност

Bevel Edge Chisels-bg

Kirschen Skewed Chisels (Pair)

Kirschen

ax480161

89,00 лв.

Finely ground and polished bevel edge bladesFor fine tuning tenons and many other types of jointSold as a pair, left and rightHornbeam handles-bg

Наличност

Mortice Chisels-bg

Kirschen Joiner's Mortice Chisels

Kirschen

ax480753

95,00 лв.

Heavy duty mortice chiselsLarge hornbeam handles with leather washerStout rectangular section bladeReinforced with a steel ferrule and top ringMade to Kirschen's traditional high quality-bg

Наличност

Corner Chisels-bg

Lie-Nielsen Fishtail Chisels

Lie-Nielsen

ax802877

194,00 лв.

Ideal for reaching the back corners of half-blind dovetailsUse for paring or fine tuning in hard to reach areasUnique shape offers versatility for right and left hand25-degree bevelO1 tool steel hardened to RC 60-62Socket style Hornbeam handle-bg

Наличност

Bevel Edge Chisel Sets-bg

Stanley FatMax Bevel Edge Chisel Sets

Stanley

ax820163

82,00 лв.

Soft feel urethane panels for comfortSteel striking capEN31 fully ground and finished ball-bearing steel bladeSet of 3 (12,18 and 25mm)Set of 5 (6,12,18,25 and 32mm)-bg

Наличност

All Steel Chisels-bg

Ansells Forged All-Steel Wood Chisels

Ansell

ax844543

72,00 лв.

One-piece solid forgingChrome Vanadium steel for toughness and longevityMade for heavy jobs such as roofing and large framing jointsDesigned to be struck with a steel hammer350mm (14") overall length-bg

Наличност

Bevel Edge Chisels-bg

Japanese Bevel Edge Chisels

Tools from Japan

ax857203

38,00 лв.

Western style, Japanese made chiselsProfessional quality, chrome vanadium steel alloy bladesBlade length approximately 100mm(4"), tough polypropylene handleCarefully hardened and tempered, they hold a razor edgeGood balance in the handSuitable for both site and finer bench work-bg

Наличност

Bevel Edge Chisels-bg

Veritas PM-V11 Bench Chisels

Veritas

ax887049

179,00 лв.

Extremely durable PM-V11 steel alloyHighly wear-resistant, yet easy to sharpenBlades lapped to a flatness tolerance of +/-0.0127mmMaple handle, kiln-baked to seal it against humidity changesHardness is HRC 61-63All have 2° micro bevels, and require only final honing before use-bg

Наличност

Bevel Edge Chisels-bg

Stanley FatMax Bevel Edge Chisels with Thru Tang

Stanley

ax906021

26,00 лв.

Online exclusiveErgonomic handle design incorporating a shatterproof polymer handleFriction welded bolster also gives strength and durabilitySteel striking cap can be struck with a steel hammer for increased cutting forceThe body resists most solventsQuality chrome alloy steel provides superior edge retention-bg

Наличност

Bevel Edge Chisels-bg

Veritas PM-V11 Butt Chisels

Veritas

ax932346

177,00 лв.

Extremely durable PM-V11 steel alloyHighly wear-resistant, yet easy to sharpenBlades lapped to a flatness tolerance of +/-0.0127mmMaple handle, kiln-baked to seal it against humidity changesHardness is HRC 61-63All have 27° micro bevels and require only final honing before use-bg

Наличност

Bevel Edge Chisels-bg

Axminster Rider Bevel Edge Chisels, Soft-Grip Handles

Axminster Rider

ax974877

26,00 лв.

Fine-grained, chrome manganese steel for ultra keen edgeEuropean madeHardened and tempered to 59 HRC stays sharp longerChisels ground and polished only require final honingSlim blades improve clearance in tight cornersBi-material handles for comfortable and secure gripMetal striking to take hammer blowsOverall length 250mm-bg

Наличност

Butt Chisels-bg

Axminster Rider Butt Chisel

Axminster Rider

ax974886

31,00 лв.

Smooth pear shaped hornbeam handle for controlEuropean madeHandle sits comfortably in the palmFine-grained, chrome manganese steel blade offers ultra keen edgeHardened and tempered to 59 HRC stays sharp longerBlade ground and polished only requires final honingSlim blade improves clearance and view for fine work-bg

Наличност

Mortice Chisels-bg

Axminster Rider Mortice Chisel

Axminster Rider

ax974893

44,00 лв.

Improved performance compared to standard mortice chiselsTapered cross section prevents chisel binding in deep morticesFine-grained, chrome manganese steel blade gives ultra keen edgeHardened and tempered to 59 HRC stays sharp longerSteel hoop resists repeated mallet blowsBlade ground and polished only requires final honingStainless steel ferrule with...

Наличност

Bevel Edge Chisels-bg

Axminster Rider Bevel Edge Chisels, Hornbeam Handles

Axminster Rider

ax974902

28,00 лв.

Fine-grained, chrome manganese steel for ultra keen edgeEuropean madeHardened and tempered to 59 HRC, stays sharp longerChisels ground and polished only require final honingSlim blades allow better clearance when cleaning dovetailsEuropean hornbeam handles are comfortable and resilientWider chisels have slightly larger handles; each has correct...

Наличност

Bevel Edge Chisel Sets-bg

Lie-Nielsen 5 Piece Bevel Edge Socket Chisel Set

Lie-Nielsen

100802

852,00 лв.

Set of 5 bevel edged chiselsForged A-2 tool steel hardened to Rockwell 60-62Polished Hornbeam handlesGreat balance and comfortSupplied in an Axminster soft leather tool roll-bg

Наличност

Bevel Edge Chisel Sets-bg

Axminster Rider 6 Piece Bevel Edge Chisel Set Hornbeam Handle

Axminster Rider

103293

223,00 лв.

6-piece set, sizes: 6, 10, 12, 16, 20 and 25mmEuropean madeSupplied in wooden storage caseFine-grained, chrome manganese steel for an ultra keen edgeHardened and tempered to 59 HRC stays sharp longerChisels ground and polished only require final honingSlim blades allow better clearance when cleaning dovetailsEuropean hornbeam handles comfortable and...

Наличност

Butt Chisels-bg

Axminster Rider 4 Piece Butt Chisel Set

Axminster Rider

103294

169,00 лв.

4 chisel set: 6, 12, 20 and 25mmEuropean madeSmooth pear shaped Hornbeam handles for controlHandle sits comfortably in the palmFine-grained, chrome manganese steel blades for ultra keen edgeHardened and tempered to 59 HRC stay sharp longerBlades ground and polished only require final honingSlim blades improve clearance and view for fine work-bg

Наличност

Corner Chisels-bg

Axminster Rider Corner Chisel

Axminster Rider

103318

75,00 лв.

For trimming or cleaning, produces perfect 90° cornerIdeal for squaring router-cut hinge recessesFine-grained, chrome manganese steel blade gives ultra keen edgeHardened and tempered to 59 HRC stays sharp longerStainless steel ferrule with shock absorbing leather washerHornbeam handle, smooth, comfortable and resilientBlade ground and polished only...