Маркиращи и измерващи инструменти

Показани са 1-24 от общо 209 артикул(а)

Маркиращи инструменти

Маркиращ инструмент Веритас

Hardened steel wheel cutter Cuts wood fibres, rather than tears Marks cleanly, even on cross grain The wheel retracts into the face of the gauge for storage and protection The gauges are very easy to set Use as a depth gauge to transfer measuremets Made in Canada -bg

View

Аксесоари за банциг

Дигитален ъгломер UJK Technology

103863

Digital readings with a resolution of 0.1° Displays either absolute or relative angles Back lit LCD screen with 10mm high figures; easy to read Magnets in base grip onto steel and ferrous surfaces Durable aluminium frame, dust and waterproof to IP54 Lightweight and portable; 60 x 60 x 25mm, weight 70g Auto shut-off after 5 minutes Powered by a...

View

Scribers-bg

Veritas Transfer Scribe

202391

Aluminium alloy with brass fittingsSupplied with double ended steel guide pinUse for compass work and transfer scribingFully adjustable from 0-300mmBi-directional level bubbles ensure accuracySupplied with an indelible pencil-bg

View

Trammels-bg

Veritas Trammel Points

102159

Stainless steel for durability and corrosion resistancePoints score clear lines on wood, aluminium, brass, bronze and mild steelRemovable tips, trammel bodies double as square gaugesTrammels fit onto any rule or straight edge up to 6.35mm(1/4") thickEach trammel is 12.7mm(1/2") and 63.5mm(2.1/2") long overallMade in Canada-bg

View

Извити пергели

Veritas Thickness Calipers

ax788307

For turners: open the calliper by just pulling the legs apartSpacing nut between the legs rather than outside facilitatesPosition and then set the spacing nut to the wall thicknessOpen callipers, remove and measure tip gapSpacing nut adjustable for any thicknessFrom 0 to 343mm on 420mm model and 0 to 140mm on 230mm modelRespective throat depths: 295mm and...

View

Straight Edges-bg

Veritas Steel Straight Edge

ax788270

Canadian-made precision steelGround flat to within 0.025mm on both edgesStress-relieved, remains true under temp. change38mm wideStands on edge unsupported, so hands free for precise measurementHang holes, for easy storageLinished sides give a textured surface making straightedge easier to grip610 x 6.3mm (24" x 1/4") thick - 1kg915 x 9.5mm (36" x 3/8")...

View

Layout Tools-bg

Veritas Sliding Square

475300

Use to lay out or transfer measurementsSimplifies working in two axesReduces error when marking 2 dimensionsStainless-steel blade is 75mm wide and 150mm longMachine ground on all four edges.Metric graduated to 100mm on sides and end to 70mmBlade cut-out holds pencil for parallel linesHardened steel reference pins set in bodyMade in Canada-bg

View

Дърводелски прав ъгъл

Veritas Saddle Square

ax480278

Allows the scribing of two perpendicular surfaces at one timeMade of anodised aluminiumVersion is available for stud wall layout-bg

View

Дърводелски прав ъгъл

Veritas Precision Square Metric

952847

As accurate as an engineer's square (0.025mm per 25mm of length)Four ground edges are ground graduations on all sides and edgesUse for general layout and checkingA great tool for machine set-upEngineer’s corner ensures the square seats correctlyHigh carbon steel, hard chrome plating, etched and filled metric markingsMade in USA-bg

View

Setting Gauges-bg

Veritas Poly Gauge

610132

Quick and accurate setting of saw blades, mitre and planer fencesPre-determined angles are 45°, 54°, 60°, 67.5° and 75°Can be used horizontally or verticallyOverall size 215 x 150mm-bg

View

Plumb Bobs-bg

Veritas Plumb Bob and Case

475633

Fits in a 1" diameter case, which protects the tipCollet for use with a drill-press alignment2" in length, held by integral 'O' ringSolid brassCord and drawstring bag includedMade in Canada-bg

View

Шаблони, Триъгълници

Veritas Mitre Saddle

202386

For transferring a 45° mitre line to an adjacent perpendicular faceMade from anodised aluminiumMade in Canada-bg

View

Маркиращи инструменти

Veritas Miniature Marking Gauges

105414

One third scale Veritas marking gaugesFully working miniature versionsPerfect for delicate, small scale work57mm long, stainless steel rods with brass reference facesCircular cutters will not tear wood fibresUseful for transferring measurementsFrench-fitted embossed leatherette box-bg

View

Маркиращи инструменти

Veritas Micro-Adjust Wheel Marking Gauge

104388

Fine adjustment mechanism with a range of 6mmLarge reference surface for square registrationAluminium body with brass face, stainless steel rodHardened steel wheel cutterCutter position allows use as a depth gaugeOverall length 170mmMade in Canada-bg

View

Bar Gauges-bg

Veritas Large Mushroom Tip for Bar Gauge Heads

506868

Additional tips for the Veritas Bar GaugeMushroom-shaped, machined from solid brass35mm diameter provides a large reference faceReversible for inside measurementsWide, stable platform when taking a vertical measurementMade in Canada-bg

View

Маркиращи инструменти

Veritas Dual Marking Gauge and Shaft Clamp - PACKAGE DEAL

717714

Hardened steel wheel cuttersCuts wood fibres, rather than tearsMarks cleanly, even on cross grainWheels retract into the head of the gauge for storage and protectionThe gauges are very easy to setMade in CanadaLock the relative position of the two rodsMachined to precise tolerances to prevent binding on the rods13mm long collar is made from extruded...

View

Маркиращи инструменти

Veritas Dual Marking Gauge

952906

View

Dovetail Markers-bg

Veritas Dovetail Saddle Markers

ax788057

Precision machined at the traditional 1:6 & 1:8 anglesLong legs ensure accurate registrationContinuous line can be transferred around the cornerStraight and angled lines can be scribed simultaneously, ensuring alignmentInside corner is relieved to ensure flush seating even on saw whiskersAnodised aluminium, light and durable-bg

View

Dovetail Markers-bg

Veritas Dovetail Markers

610131

For quick and accurate marking of dovetailsSupplied as a pair - 1:6 for softwoods & 1:8 for hardwoodsBoth measure 2" x 2"Anodized aluminiumEngineer's corner on inside edges-bg

View

Аксесоари за универсали

Veritas Centre Finder

610133

Mark timber up to 6"acrossKnife edge steelbladePre-drilled for mountingMade from die-cast aluminiumRequires no effortWorks on square/cylinder stockGood on other surfaces tooAccurate to 1/12"Made in Canada-bg

View

Маркиращи инструменти

Veritas Carpenter's Gauge

475905

Designed to be carried in an apron/pocketLocks vertically for usageLocks horizontally for easy storage/carryDirect reading in metric/imperialScribe circles up to 300mm(12")Made of brass, stainless steel and tough ABSMade in Canada-bg

View

Trammels-bg

Veritas Beam Compass Heads

610137

Aluminium heads clamp on bar from 5/8"- 3/4"Unlimited circle sizeBrass clamping knob tightly holds to beamPoints have 1/8" of fine adjustmentHardened points mark surfaces such as steel plateIncludes pencil for marking wood & wallboardMade in Canada-bg

View

Trammels-bg

Veritas Beam Compass

106617

Draw or scribe wide arcs or large diameter circlesLong reach with micro adjustmentEnsures accuracy over a wide rangeDraws circles or arcs up to 1,800mm diameterCentre point fitted with micro-adjusterComes with steel marking point and pencil holderIncludes 2 extension beamsStainless steel construction-bg

View

Bar Gauges-bg

Veritas Bar Gauge Heads

610134

For comparing and transferring measurementsPerfect tool for checking squarenessRequires just two pieces of timber 3/4" x 1/4"-bg

View

Продуктът е добавен в Любими

Добавени продукти за сравнение.

Jettools. bg използва бисквитки (cookies). Ползвайки уебсайта, Вие се съгласявате с нашата Политика за кукита. Прочети повече