Rebate & Shoulder Planes

Showing 1-16 of 16 item(s)

Delivery 7-11 working days.

Veritas Large Shoulder Planes

Trim breadboard tenons, adjust shoulders, pare down tenon cheeksHardwood lever cap knob that pivots 180°Multi-positional front knob can be mounted on the top or on either sideSupplied with a 25° lapped blade in O1 or PM-V11 tool steel

Delivery 7-11 working days.

Rebate & Shoulder Planes

Clifton 420 Shoulder Plane

107496

BGN601.94

Precisely machined and accurately ground bodyFine feed-screw for cutting depth adjustmentCurved and polished lever arm for comfort and control

Delivery 7-11 working days.

Rebate & Shoulder Planes

Clifton 410 Shoulder Plane

107495

BGN561.30

Micro-adjustable blade for precise trimmingPlane mouth set at 0.8mm for fine shavingsPrecision ground sole and sides, use upright or on its side

Delivery 7-11 working days.

Rebate & Shoulder Planes

Clifton 400 Shoulder Plane

107494

BGN248.26

A cabinet maker’s tool delicate fitting and trimmingFine grained cast iron body; precision ground sides and soleBlade hardened HRC 59-61, locked with a Walnut wedge

Delivery 7-11 working days.

Rebate & Shoulder Planes

Clifton 3110 (3-in-1) Shoulder Plane

107493

BGN635.05

Use as a shoulder, rebate or chisel planeMicro-adjustable blade for complete control of depth of cutSupplied with shims for adjusting the width of the mouth

Delivery 7-11 working days.

Rebate & Shoulder Planes

Rider No. 92 Shoulder Plane

107344

BGN196.74

Highly accurate, shoulder plane, 19 mm wide bladePrecision machined, precision ground for accurate resultsSole is flat and the sides are square to the soleMovable front section for coarse or fine workConverts into a chisel plane, for cleaning stopped rebatesFull width blade, micro adjustable depth of cut

Delivery 7-11 working days.

Rebate & Shoulder Planes

Rider No. 90 Bull Nose Plane

107343

BGN196.74

Precision ground, sides square to the soleMicro adjustable 25.4 mm full width bladeMovable upper section to vary the width of the mouthHoned, O1 high carbon steel bladeConverts into a chisel plane, for cleaning stopped rebates

Delivery 7-11 working days.

Rebate & Shoulder Planes

Rider No. 778 Duplex Rebate Plane

107349

BGN241.74

Deigned to cut rebates up to 38mm wideAdjustable fence solidly supported on twin guide rodsSpur for cross grain cutting and a depth stopFence fits to either side of the planeTwo positions for the blade enhances the versatility of this planeFine blade adjustment for precise depth control of the cut

Delivery 7-11 working days.

Rebate & Shoulder Planes

Rider No. 77 2-in-1 Plane

107346

BGN182.64

Dual purpose, two planes in one; bull nose plane and chisel planeMicro depth control with knurled adjusting knob, solid bronze lever27mm full width blade, ideal for cleaning rebates

Delivery 7-11 working days.

Rebate & Shoulder Planes

Rider 3-in-1 Shoulder Plane

107345

BGN241.74

Great versatility a plane with 3 distinct functionsShoulder Plane for close fitting jointsBullnose Plane for fine tuning rebates, Chisel Plane for close workSupplied with shims to vary the width of the mouthMicro depth control with knurled adjusting knobSolid, polished, cast bronze, arched lever

Delivery 7-11 working days.

Rebate & Shoulder Planes

Veritas Bullnose Planes

717533

BGN589.90

Two planes in oneRemovable nose sectionPM-V11 alloy blade

Delivery 7-11 working days.

Rebate & Shoulder Planes

Veritas Jack Rebate Plane

717521

BGN1,126.58

Suitable for large rebates, fielded or bevelled panelsMakes right or left-handed corner cuts cleanly and accuratelyAdjustable scoring spurs on both sides for cross-grain4.8mm thick bevel-up blade, extends the full width (57mm)185mm removable fence can be set up to 133mm from the shoulderRear tote tilts and locks to either side for knuckle...

Delivery 7-11 working days.

Rebate & Shoulder Planes

Veritas Medium Shoulder Planes

717527

BGN635.05

Multi-purpose, highly accurate planeExceptional clean cuts on end grain (e.g. trimming tenon shoulders)Unique lever cap with a pivoting knobSupplied with a 25° lapped blade in PM-V11 alloy steel

Veritas Small Shoulder Plane with PM-V11 Blade

Delivery 7-11 working days.

Rebate & Shoulder Planes

Veritas Small Shoulder Plane with PM-V11 Blade

717524

BGN600.13

Low bed angle giving exceptionally clean end-grain cuttingMicro-adjustable toe allows very fine setting of the mouthFits comfortably in the handDuctile cast iron body is accurately machined and finely groundSole and sides are flat and squareSole is 155mm long by 12.7mm wideLapped blade is 3.2mm thick in PM-V11 alloy

Veritas Shoulder Plane & Hand Jointer Kit

Delivery 7-11 working days.

Rebate & Shoulder Planes

Veritas Shoulder Plane & Hand Jointer Kit

720743

BGN644.02

For box, model making and small partsVeritas Medium Shoulder PlaneMulti-purpose, highly accurate planeClean cuts on end grain (for example, trimming tenon shoulders)Unique lever cap with a pivoting knobSupplied with a 25° lapped blade in PM-V11 alloy steelVeritas Hand JointerTake the work to the plane rather than plane to the workLow-friction HDPE...

Delivery 7-11 working days.

Rebate & Shoulder Planes

Veritas Side Rebate Plane

211005

BGN419.53

For cleaning up, fine fitting or trimming of rebates and groovesDual-blade configuration, pivoting handle for right or left-hand useUse in slots as narrow as 4.8mmToe is removable for use in a stopped dado115mm long, weight 450gDuctile cast iron body with O1 tool steel blades (HRC 58-60)Made in Canada