Power Tool Accessories
Made for high performance powered screwdrivers and impact driversSpecial torsion zone optimised and adapted for each driveThree times the life of a standard bitDouble the life of other high performance impact bitsIdeal for permanent impact use1/4" hex drive (C6.3)Supplied in packs of 5
Accessories for Miniature Power Tools
Intended for the serious carver, modeller or pattern maker190W continuously rated motorVariable speed (0-20,000rpm) controlled by foot pedal970mm long flexible shaftWall mounted hangerReciprocating carving head with chisels
Intended for the serious carver, modeller or pattern maker190W continuously rated motorVariable speed (0-20,000rpm) controlled by foot pedal970mm long flexible shaftWall mounted hangerNot supplied with handpiecesChoice of handpieces and 1 carving head available
Flexible drive shaft and carving headConvert Dremel and other mini power tools into powered carversReciprocating motion speed directly related to tool speedFor detail work and the decoration of turned workSupplied with five chisels: 2 x flat chisels, round end chiselCurved gouge and a V tool
For putting tapered tenons on turnings, dowels or rustic furniture componentsStraight-edged blade tapers the endsSize given is the minimum tenon diameter; the max is 1/2" greater3/8", 1/2" and 5/8" sizes will cover most tenoning requirements for typical chair-makingThe curved blade (for dowel making) should be used with only the three smallest sizes
Drill Guides & Drilling Jigs
Ensures holes exactly opposite and equally spacedTwin-register pins in the rails fit into holes already drilledRegister pins have tapered tips24" rails each have 20 holes drilled at 1" intervalsBush carrier registers perfectly in hole and is easily movedHoles drilled at 90° as hardened bushings are 13/16" long10 hole sizes can be drilled with the standard...
Cut smooth, perfect tenons with radiused shouldersCutters run vibration-free while being driven by an electric drillYield the same accuracy when used with a hand braceAnodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurateThe back end of the blade is safely contoured to avoid anything extending...
Attachments for Rotary Multi-Tools
Fits any tool with 3/4" x 12 tpi threaded collar, as standard on Dremel and othersConverts almost any rotary multi-tool into a miniature plunge routerLock lever for continuous cutsMicro-adjustable depth stop gives precise control100 x 75mm footprint, easy to position and manoeuvreAluminium with stainless steel rods and knobsMade in Canada
Available in diameters from 5/16" to 9/16", latter used for chair rungs1/2" are useful for trellis or lattice workAll have a straight blade that cuts a 60° shoulder tenon (not a radiused shoulder tenon)5/16" size cuts tenons up to 1" long1/2" and 9/16" sizes cut tenons up to 1.3/8" longA plug gauge is included for easy blade setting, 3/8" round shankFor...
Lip & Spur Drills
Made using top-of-the-range American HSS twist drillReshaped and sharpened by Veritas in CanadaHigh speed steel stays sharp ten times longer than carbon steelPolished flutes for superior chip clearanceSharply defined lips for clean entry and smooth sidewallsDiameters conform to exacting standards of accuracy