Tenon Saws

Axcaliber Fineline PTFE... Axcaliber Fineline PTFE... 2
Available
Tenon Saws

Axcaliber Fineline PTFE Tenon Saws

Axcaliber
ax961099
BGN26.00
Steel blade with PTFE low friction, corrosion resistant coating80mm depth of cut on both sizesTriple edge teeth diamond ground, seriously sharpFine 11tpi ideally suited to mitre or joint workComfortable bi-material handle
Stanley FatMax Tenon Saw
Available
Tenon Saws

Stanley FatMax Tenon Saw

Stanley
ax715104
BGN27.00
300mm (12") or 350mm (14") blade with reinforced backExtra long life induction hardened triple edge tooth designFine 11tpi ideally suited to mitre or joint workBi-material handle for improved grip
Stanley FatMax Tenon Back Saw
Available
Tenon Saws

Stanley FatMax Tenon Back Saw

Stanley
136421
BGN28.00
Online exclusiveReinforced back for extra rigidity makes a straighter cutHandle screwed to blade for extra strengthFinger rest - ergonomic design, useful for extra control when starting a cutTriple edged teeth cut on both push and pull strokesInduction hardened teeth45° and 90° angle quick reference pointsBi-material handle for improved grip and...
Bahco Professional  Tenon Saw
Available
Tenon Saws

Bahco Professional Tenon Saw

Bahco
117950
BGN29.00
Professional tenon sawFor fine and medium thick materialsSpecially adapted for the cutting of small-section timber and mitre guide sawingHardpoint teeth for long lasting sharpnessHeavy steel back for rigidity and accurate cuttingScrewed one-piece, two-component plastic handle
Veritas Gent's Saws Veritas Gent's Saws 2
Available
Dovetail & Gents Saws

Veritas Gent's Saws

Veritas
ax851878
BGN124.00
0.4mm thick high-carbon steelInjection moulded back creates a solid one-piece blade/spine/mount assemblyBrass nut secures comfortable hardwood handleSaw cuts easily and stays true
Veritas Fine-Tooth Dovetail... Veritas Fine-Tooth Dovetail... 2
Available
Tenon Saws

Veritas Fine-Tooth Dovetail Saw

Veritas
211804
BGN153.00
Premium fine-tooth dovetail saw 20 teeth per 25mm (20tpi blade)235mm (9.1/4") long by 0.5mm thick high-carbon steel bladeInjection moulded back creates a solid one-piece blade/spine/mount assemblyBrass nut secures comfortable hardwood handleSaw cuts easily and stays trueOverall length 360mm (14.1/4")
Veritas Dovetail Saw Veritas Dovetail Saw 2
Available
Dovetail & Gents Saws

Veritas Dovetail Saw

Veritas
210923
BGN153.00
Spine permanently moulded onto the bladeRight amount of weight to carry the saw effortlessly into the cutEnsures control where accuracy is most importantPolished hardwood handle is shaped to fit the hand comfortablyMortice and tenon joint between handle & back for solid and secure fixingJapanese high carbon steel blade, 230mm (9") long by 40mm (1.1/2")...
Veritas Small Crosscut Saw Veritas Small Crosscut Saw 2
Available
Tenon Saws

Veritas Small Crosscut Saw

Veritas
211803
BGN153.00
0.5mm thick high-carbon steel with 16 teeth per 25mm (16tpi)Injection moulded back creates a solid one-piece blade/spine/mount assemblyBrass nut secures comfortable hardwood handleSaw cuts easily and stays trueOverall length 360mm (14.1/4")
Victor Tenon Saw Victor Tenon Saw 2
Available
Tenon Saws

Victor Tenon Saw

Victor
910306
BGN155.00
Alloy steel bladeHeavy brass backingVarnished hardwood coloured handleThree-screw fixings allow for re-tightening15tpi crosscutBlade length 300mm(12")
Veritas Crosscut Carcass Saw Veritas Crosscut Carcass Saw 2
Available
Tenon Saws

Veritas Crosscut Carcass Saw

Veritas
950978
BGN160.00
0.5mm thick high-carbon steel 14tpi bladeInjection moulded back creates a solid one-piece blade/spine/mount assemblyBrass nut secures comfortable hardwood handleSaw cuts easily and stays trueOverall length 415mm(16.1/4")
Veritas Rip Cut Carcass Saw Veritas Rip Cut Carcass Saw 2
Available
Tenon Saws

Veritas Rip Cut Carcass Saw

Veritas
950979
BGN160.00
0.5mm thick high-carbon steel 12tpi rip bladeInjection moulded back creates a solid one-piece blade/spine/mount assemblyBrass nut secures comfortable hardwood handleSaw cuts easily and stays trueOverall length 415mm(16.1/4")
Veritas Tenon Saws Veritas Tenon Saws 2
Available
Tenon Saws

Veritas Tenon Saws

Veritas
ax935048
BGN275.00
Choose from rip cut 9tpi or crosscut 12tpiHigh-carbon steel blades 400mm longBrass nut secures comfortable hardwood handleExellent feel and balance
Lie-Nielsen Tapered...
Available
Tenon Saws

Lie-Nielsen Tapered Crosscut Saw

Lie-Nielsen
506421
BGN361.00
Open style maple handleHigh carbon Swedish steel bladeHardened and tempered for optimum performanceMilled solid back adds right amount of weight to the cutTapered blade is 14" long x 0.38mm(0.015") thickBlade width 57mm(2.1/4") at heel tapering to 50mm(2") at toeEvery saw is precision filed, set, and test cut in hardwood
Lie-Nielsen Carcass Saw Lie-Nielsen Carcass Saw 2
Available
Tenon Saws

Lie-Nielsen Carcass Saw

Lie-Nielsen
600183
BGN361.00
Classic hand saw based on the traditional 1830s Sheffield designCurly Maple handle350mm (14") blade57mm (2.1/4") depth of cut
Lie-Nielsen Rip Tenon Saw Lie-Nielsen Rip Tenon Saw 2
Available
Tenon Saws

Lie-Nielsen Rip Tenon Saw

Lie-Nielsen
212480
BGN452.00
Filed for rip cutting (10tpi), best for tenon cheeks or dovetailsDesigned based on a classic DisstonHigh quality Swedish steel, hardened and tempered to HRC 52Retains a keen edge yet remains sharpenable with a saw fileSolid brass back for a well-balanced and smooth cutting sawCurly Maple handles, fitted using traditional split nut screwsA pure joy to...
Lie-Nielsen Tapered Tenon Saw
Available
Tenon Saws

Lie-Nielsen Tapered Tenon Saw

Lie-Nielsen
506420
BGN452.00
Tapered blade for improved handlingFiled for rip cutting, best for tenon cheeks or dovetailsHigh quality Swedish steel, hardened and tempered to HRC 52Retains a keen edge yet remains sharpenable with a saw fileSolid brass back for a well balanced and smooth cutting sawCurly maple handles, fitted using traditional split nut screws
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text