Drilling

Axminster M2 Ground HSS... Axminster M2 Ground HSS... 2
Available
Jobber & Metal Drills

Axminster M2 Ground HSS Drill Bits

Axminster
ax22813
BGN2.00
M2 grade Swedish HSS steelIntended for general workshop and production useDeep flutes ensure good chip clearanceRange of metric and imperial sizesFor home and production use on general and alloy steels up to HRC 30Outside diameter tolerance H8 ISO 286, gives a close running fitAngle of the drill point is 118 degrees
Bosch SELFCUT Flat Bits... Bosch SELFCUT Flat Bits... 2
Available
Flat Bits

Bosch SELFCUT Flat Bits (Hex Shank)

Bosch
ax22049
BGN5.00
For rapid drilling of larger diameter holesSelf-cutting threaded point and two side cuttersGround chip breakers1/4" hexagonal shankPlease note: Max running speed stated on each drill
Axminster M42 HSS Cobalt... Axminster M42 HSS Cobalt... 2
Available
Jobber & Metal Drills

Axminster M42 HSS Cobalt Drill Bits

Axminster
ax21744
BGN6.00
M42 high speed steel8% cobaltFor use on alloy and hardened steels, cast iron, titanium and moreMetric only130 Degrees tip angle
Bosch Multi-Construction... Bosch Multi-Construction... 2
Available
Multi-Construct Drills

Bosch Multi-Construction Drill Bits

Bosch
ax35478
BGN6.00
Suitable for wood, masonry, ceramic tiles, UPVC and steelDiamond ground tungsten carbide tipSteep aggressive fluteSupplied singly
Centre Drills BS
Available
Jobber & Metal Drills

Centre Drills BS

Axminster
ax21647
BGN6.00
Double ended combined drills and countersinksHigh speed steel
Axminster Tapered Plugs
Available
Plug Cutters & Plugs

Axminster Tapered Plugs

Axminster
ax20843
BGN9.00
Pre-cut tapered plugsChinese CherryFor covering screw headsSold in bags of 100
Long Series M42 HSS Cobalt... Long Series M42 HSS Cobalt... 2
Available
Jobber & Metal Drills

Long Series M42 HSS Cobalt Drill Bits

Axminster
ax21588
BGN13.00
Industrial quality metric drill bitsGround from M42 HSS Cobalt steel135° pointExtra length allows for drilling deep holesClear the flute periodically whilst drilling to prevent over-heatingWe recommend using lubricant when drilling in ferrous metalsH8 tolerance
Dome Polishing Mop
Available
Drill Brushes

Dome Polishing Mop

Axminster
ax480377
BGN13.00
Specially domed for polishing a concave surfaceBrings up a high gloss to wax or friction polish2 diameters, 75 or 100mmFits almost any electric drill
Bosch Progressor Holesaws Bosch Progressor Holesaws 2
Available
Holesaws

Bosch Progressor Holesaws

Bosch
ax19863
BGN19.00
One arbor fits all sizes, available separatelyToothed edge made with hard wearing 8% cobalt alloyHolesaws sizes range from 22mm-70mm45mm cutting depth
Circular Wire Drill Brushes Circular Wire Drill Brushes 2
Available
Drill Brushes

Circular Wire Drill Brushes

SIT
ax19677
BGN30.00
Wide, dense brushing faceUseful shape for general purpose applicationsParticularly useful for small items
Veritas Tapered Snug Plug... Veritas Tapered Snug Plug... 2
Available
Plug Cutters & Plugs

Veritas Tapered Snug Plug Cutters

Veritas
ax22401
BGN36.00
Snug plug cutters cut a slightly tapered plugAvailable in metric and imperial sizesFlares out at 3° angleFour cutting flutes
Miller Birch Dowel Joinery... Miller Birch Dowel Joinery... 2
Available
Dowel

Miller Birch Dowel Joinery Kits

Miller Dowel
ax208188
BGN72.00
Kits available in three sizesMini c/w 100 dowelsStandard c/w 40 dowelsLarge c/w 50 dowelsBirch DowelsSelf-cappingRibs along length allow glue to adhere to material and dowelDrill bit supplied in initial starter pack
Armeg Porcelain Tile Drills Armeg Porcelain Tile Drills 2
Available
Glass & Tile Drills

Armeg Porcelain Tile Drills

Armeg
ax19871
BGN80.00
No more time wasted trying to drill fixing holes into porcelain tilesThe PTC drill bit range from Armeg is the solution to this difficult applicationWill drill through Class 5 tiles (PEI) and most domestic and industrial wall and floor tilesWill also drill through a wide range of hard to penetrate materials such as granite, marble and ceramicsSpecifically...
Veritas Tapered Tenon Cutters
Available
Tenon Cutters

Veritas Tapered Tenon Cutters

Veritas
ax788444
BGN100.00
For putting tapered tenons on turnings, dowels or rustic furniture componentsStraight-edged blade tapers the endsSize given for each cutter is the minimum tenon diameter it will cut; the maximum is 1/2" greater3/8", 1/2" and 5/8" sizes will cover most tenoning requirements for typical chair-makingThe curved blade (for dowel making) should be used with...
Lie-Nielsen Dowel Plates Lie-Nielsen Dowel Plates 2
Available
Dowel Cutters

Lie-Nielsen Dowel Plates

Lie-Nielsen
ax20396
BGN142.00
Make exact sized dowels from any solid timberSurface ground A-2 cryogenically treated tool steelPlates available in metric sizes
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text