Multifunction Workbench Fittings

UJK Technology Wedges (Pkt 2) UJK Technology Wedges (Pkt 2) 2
Available
Bench Dogs & Holdfasts

UJK Technology Wedges (Pkt 2)

UJK Technology
105364
BGN13.00
Useful in many workholding situationsSelf-locking, gentle tap to release200mm long, taper from 32mm to 27mmCNC cut from 20mm thick HDF ValchromatApplied force is at 90° to the edge of the workpiece
UJK Technology Backstop UJK Technology Backstop 2
Available
Bench Dogs & Holdfasts

UJK Technology Backstop

UJK Technology
105367
BGN13.00
Use on any multifunction table with 20mm holes at 96mm centresCNC machined from durable, HDF ValchromatUseful stop or assembly aid200mm long x 30mm wide x 20mm thick3 dog holes allow straight or diagonal placement
UJK Technology Surface Cam... UJK Technology Surface Cam... 2
Available
Bench Dogs & Holdfasts

UJK Technology Surface Cam Clamps (Pair)

UJK Technology
105325
BGN23.00
For secure side pressure clampingDesigned for use on multifunction bench20mm offset dog hole creates cam actionCNC machined phenolic resin laminateLow profile, only 12mm thickUse for planing, carving, drilling, sanding etcSold as a pack of 2
UJK Technology Twist Dogs... UJK Technology Twist Dogs... 2
Available
Bench Dogs & Holdfasts

UJK Technology Twist Dogs (Pair)

UJK Technology
ax965859
BGN34.00
Unique design, pin for secure fit in Twist Lock holesRemove pin for snug fit in any 20mm diameter dog holeHard acetate plastic won’t damage cutting edgesAccurate: precise 25mm diameter with either 18mm or 40mm protrusionUse with the MultiFunction Workbench to set up fences and guide rails for precise results
UJK Technology Assembly Square UJK Technology Assembly Square 2
Available
Bench Dogs & Holdfasts

UJK Technology Assembly Square

UJK Technology
105280
BGN52.00
Truly useful accessory for a multifunction tableUse to hold parts at exact right anglesThick HDF Valchromat, durable and stableCNC machining guarantees accuracy360mm long legs at 90°Forms a reference for a fast, accurate setup for mitre cuts with guide rail
UJK Technology Cam & Wedge... UJK Technology Cam & Wedge... 2
Available
Bench Dogs & Holdfasts

UJK Technology Cam & Wedge Clamping Set

UJK Technology
105369
BGN65.00
Truly useful accessory for a multifunction tableHolds workpieces without any surface obstructionUseful for sanding, routing, carving etcSet includes 3 stainless steel 12mm Guide PupsPhenolic resin Surface Cam ClampHDF Valchromat, wedges, backstop and spacer
UJK Technology HDF...
Available
Multifunction Workbench Fittings

UJK Technology HDF Valchromat Top Blank

UJK Technology
102539
BGN208.00
18mm thick HDF Valchromat, greater durability than MDFGenerous work surface 1,102mm x 718mmDrop-in snug fit into UJK Technology workbench frame and Festool MFT baseA solid work surface for assembly or general workMake your own custom multifunction benchMade in the UK
UJK Technology... UJK Technology... 2
Available
Circular Saw Accessories

UJK Technology Multifunction Workbench (Frame Only)

UJK Technology
102540
BGN260.00
High quality phenolic faced birch ply for strengthBox construction guarantees tops remain flatDog holes and clamp cut-outs for vertical work holdingCut-outs to fit base on trestles for site useCentral storage well for Multifunction accessoriesMade in the UK
UJK Technology HDF... UJK Technology HDF... 2
Available
Multifunction Workbench Fittings

UJK Technology HDF Valchromat Top for Parf Dogs

UJK Technology
102537
BGN312.00
For work holding while sawing or routing with guide railsHDF Valchromat work surface 1,102mm x 718mm11 x 7 grid of perfectly aligned 20mm dog holesHoles suitable for Parf dogs, dog clamps and other accessoriesDrop-in snug fit into UJK workbench frame and Festool MFT baseMade in the UK
UJK Technology Isometric...
Available
Circular Saw Accessories

UJK Technology Isometric HDF Valchromat Top for Parf Dogs

UJK Technology
105278
BGN312.00
Cut or rout perfect 90°, 60° and 30° anglesUnique grid of 20mm Parf dog in a hexagonal patternCNC machined, guaranteed positional accuracyUse with guide rails, Parf dogs, clamps etcHDF Valchromat work surface 1,102mm x 718mmDrop-in fit into UJK workbench frame and Festool MFT baseMade in the UK
UJK Technology HDF... UJK Technology HDF... 2
Available
Multifunction Workbench Fittings

UJK Technology HDF Valchromat Top for Twist Dogs

UJK Technology
102538
BGN416.00
For work holding whilst sawing or routing with guide railsHDF Valchromat work surface 1,102mm x 718mm11 x 7 grid of perfectly aligned 20mm Twist Dog holesHoles suitable for Parf dogs, dog clamps and other accessoriesDrop-in snug fit into UJK Technology workbench frame and Festool MFT baseMade in the UK
UJK Technology... UJK Technology... 2
Available
Circular Saw Accessories

UJK Technology Multifunction Workbench for Parf Dogs

UJK Technology
717978
BGN676.00
Frame made from high quality birch plywood for strengthBox construction guarantees top remains perfectly flatMultifunction workbench top from 18mm thick solid HDF Valchromat11 x 7 grid of CNC machined 20mm plain dog holesRows perfectly square to each otherDog holes allow use of Parf dogs and many other accessoriesStrong 25mm square steel tube trestles...
UJK Technology... UJK Technology... 2
Available
Circular Saw Accessories

UJK Technology Multifunction Workbench for Twist Dogs

UJK Technology
717979
BGN780.00
Frame made from high quality birch plywood for strengthBox construction guarantees top remains perfectly flatMultifunction workbench top from 18mm thick solid HDF Valchromat11 x 7 grid of CNC machined twist dog holesRows perfectly square to each otherUJK Twist Dogs lock, rock solid into dog hole (two included)Twist Dog holes are compatible with Parf dogs...
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text