Cabinet Scrapers

Concave & Convex Scraper Sets Concave & Convex Scraper Sets 2
Available
Cabinet Scrapers

Concave & Convex Scraper Sets

Thomas Flinn
ax806539
BGN18.00
10 radii covered in each setConcave for scraping spindles, chair legs etcConvex scrapers for recesses on skirting boards etcSharpen with a standard burnisherTwo scrapers per setScraper 1 - 1/4", 3/8", 1/2", 3/4" and 5/8"Scraper 2 - 7/8", 1", 1.1/8", 1.1/4" and 1.1/2"
Quadrant Scraper Set
Available
Cabinet Scrapers

Quadrant Scraper Set

Thomas Flinn
504041
BGN18.00
8 radii covered by this set of twoConcave for scraping quadrant mouldings etcConvex scrapers for recesses on skirting boards etcSharpen with a standard burnisherScraper 1 - 1/8", 3/16", 1/4" and 5/16"Scraper 2 - 3/8", 7/16", 1/2" and 5/8"
Bahco 474 Cabinet Scraper
Available
Cabinet Scrapers

Bahco 474 Cabinet Scraper

Bahco
ax898837
BGN21.00
Made from high quality swedish chrome nickel steelCold rolled, hardened and tempered, with specially ground cutting edgesEach scraper comes complete with a plastic edge protectorIdeal for smoothing hardwoods, removing paint and varnish etc.Flat profile
Lynx Mini Cabinet Scraper Set
Available
Cabinet Scrapers

Lynx Mini Cabinet Scraper Set

Thomas Flinn
504698
BGN29.00
Mini cabinet scraper setMini gooseneck - good for concave areasMini oval - also good for curved areasMini square - good for a variety of straight edges plus notches for luthier workMini concave/convex - good for curved areas and also luthier work
Lie-Nielsen Cabinet Scraper... Lie-Nielsen Cabinet Scraper... 2
Available
Cabinet Scrapers

Lie-Nielsen Cabinet Scraper Set

Lie-Nielsen
202211
BGN39.00
A pair of top quality hand scrapersPremium, high carbon Swedish tool steel1 off 62 x 150 x 0.5mm1 off 62 x 150 x 0.8mmBlades are ground square on long edges
Footprint 241 Square...
Available
Cabinet Scrapers

Footprint 241 Square Scraper Set

Footprint
119358
BGN44.00
Online exclusive3 piece setMade from the finest European SteelIdeal for the fine finishing of wood6" x 3" Scraper5" x 2.1/2" Scraper4" x 2" Scraper
Footprint 242 Shaped...
Available
Cabinet Scrapers

Footprint 242 Shaped Scraper Set

Footprint
119359
BGN44.00
3 piece setMade from the finest European SteelIdeal for the fine finishing of wood1 Oblong Scraper1 Curved Scraper1 Goose Neck Scraper
Veritas Super-Hard Milled... Veritas Super-Hard Milled... 2
Available
Cabinet Scrapers

Veritas Super-Hard Milled Scrapers

Veritas
476257
BGN44.00
Hardened to HRC 48-52 to hold an edge longerEdges are carefully milled to a square, sharp 90°Prepared edges save time and effort of filing and stoningComes in set of four50 x 150 x 0.4 & 0.6mm for fine work60 x 150 x 0.8 & 1mm for heavier stock1mm scraper suitable for paint removal
Axminster Rider No. 80... Axminster Rider No. 80... 2
Available
Cabinet Scrapers

Axminster Rider No. 80 Scraper Plane

Axminster Rider
506574
BGN65.00
Used to produce a precise even finishIdeal when used to smooth difficult grain on large areasAdjusting nut varies the bite of the bladeFine grey iron casting with machined base70mm(2-3/4") wide blade
Veritas Cabinet Scraper Holder Veritas Cabinet Scraper Holder 2
Available
Cabinet Scrapers

Veritas Cabinet Scraper Holder

Veritas
510436
BGN73.00
Accepts 140mm to 150mm long scraper bladesGlass reinforced nylon bodyClamps either side allow for projection adjustmentCentral knurled knob controls amount of bowIncludes a Veritas milled edge scraper
Veritas Miniature Cabinet...
Available
Cabinet Scrapers

Veritas Miniature Cabinet Scraper

Veritas
102160
BGN106.00
1/3 scale, fully functional cabinet scraperMeasures 97mm(3.13/16") wide overall, weight about 46gThumbscrew gives fine control over the amount of biteSpring steel blade 25mm wide, ground at 45° angleInvestment-cast steel with a stainless-steel camber screwSupplied in a French-fitted embossed leatherette box
Veritas Super-Hard Milled... Veritas Super-Hard Milled... 2
Available
Cabinet Scrapers

Veritas Super-Hard Milled Scrapers & Variable Burnisher - PACKAGE DEAL

Veritas
717713
BGN113.00
Hardened to HRC 48-52 to hold an edge longerEdges are carefully milled to a square, sharp 90°Prepared edges save time and effort of filing and stoningComes in set of four50 x 150 x 0.4 & 0.6mm for fine work60 x 150 x 0.8 & 1mm for heavier stock1mm scraper suitable for paint removalMakes raising a burr an easy jobCarbide rods fixed at an angle in brass...
Veritas Cabinet Scraper
Available
Cabinet Scrapers

Veritas Cabinet Scraper

Veritas
474843
BGN195.00
Smoothes glue lines or surfaces without tear-out, digs or gougesAllows pressure to be applied directly in line with the cutting edge70mm wide blade, with both cutting edges ground at 45°Shaped to protect the upward-facing cutting edgeSole is surface ground for accuracy (80 x 85mm)Made from ductile cast ironOverall length 290mm. Weighs about 740gMade in...
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text