Honing Guides

Veritas Mortice Chisel... Veritas Mortice Chisel... 2
Available
Honing Guides

Veritas Mortice Chisel Adaptor for MK.II Honing Guide

Veritas
103386
BGN22.00
Expands the capacity of the Veritas Mk.II Honing GuideFor sharpening thick bladed mortice chiselsSharpen mortice chisels with bevel angles of 30° to 35°Accommodates chisels up to 17.5mm(11/16") thickCompatible with standard and narrow-blade clamping headsMade in Canada
Axminster Rider Honing Guide Axminster Rider Honing Guide 2
Available
Honing Guides

Axminster Rider Honing Guide

Axminster Rider
340147
BGN28.00
Removes guesswork from setting bevel anglesFor bevel edge or firmer chisels and plane ironsAll metal construction
Axminster Deluxe Honing Guide Axminster Deluxe Honing Guide 2
Available
Honing Guides

Axminster Deluxe Honing Guide

Axminster
510008
BGN34.00
38mm long brass roller spreads the load across your stoneRoller assembly easily removed, use the holder on a bench grinderAlignment lines for setting blade square
Veritas Small Blade Holder Veritas Small Blade Holder 2
Available
Honing Guides

Veritas Small Blade Holder

Veritas
475978
BGN46.00
Blade holder may be mounted in a honing guide, or used free hand for sharpeningHolds short blades such as spokeshave blades when sharpeningBlade is secured in holder by two rare-earth magnetsAdjustable stop provides adjustment for blade projectionEffectively transforms your short blade into something larger (38 x 100mm long)Made in Canada
Veritas Camber Roller
Available
Honing Guides

Veritas Camber Roller

Veritas
202489
BGN54.00
Specifically designed for the Veritas Mk.II Honing GuideSolid brass barrel-shaped rollerAllows slight curvature with an accurate and consistent bevel angleSimply replaces the standard roller assembly
Lie-Nielsen Honing Guide Jaws Lie-Nielsen Honing Guide Jaws 2
Available
Honing Guides

Lie-Nielsen Honing Guide Jaws

Lie-Nielsen
ax961662
BGN65.00
Chisel Jaws (101894) for 3mm(1/8") and 4.8mm(3/16") bevel edge chiselsMortice Chisel Jaws (101896) for mortice chisels, and 25mm(1") bevel edge chiselsLong Jaws (101895) for blades from LN planes: No. 610, 10-1/4, 041, 042, 073, 1/2 and 85Short end hones a bevel up to 40° and the long end hones a bevel up to 30°18° Skewed Jaws (101879 and 101891) for LN...
Veritas Skew Registration Jig Veritas Skew Registration Jig 2
Available
Honing Guides

Veritas Skew Registration Jig

Veritas
202390
BGN72.00
Accessory for the Veritas Mk.II honing guideSets both skew and bevel anglesAluminium base has the angles laser etched
Axminster Trade Ultimate... Axminster Trade Ultimate... 2
Available
Honing Guides

Axminster Trade Ultimate Edge Micro Bevel Guide

Axminster Trade
105427
BGN93.00
The final stage in achieving an ultimate edgeAccepts the tool mounted in the honing guideGuarantees accurate and precise micro bevelMicro bevel strengthens the edgeSpeeds up time spent honingExtends the period between re-grindingStainless steel and aluminium for ultimate performanceFits onto the Axminster Trade Honing Guide Assembly (105281)
Veritas Narrow Blade Clamp...
Available
Honing Guides

Veritas Narrow Blade Clamp Head Only

Veritas
101261
BGN106.00
Accessory for owners of standard Mk.II honing guideFor accurately sharpening narrow bladesFits to roller in secondsClamps blades from 3mm(1/8") to 38mm(1.1/2")Hones bevel angles from 15 to 40Parallel jaws to ensure blades stay square to the jig
Veritas Mk.II Honing System Veritas Mk.II Honing System 2
Available
Honing Guides

Veritas Mk.II Honing System

Veritas
200810
BGN126.00
Increased range, capacity and accuracyIntegral blade registration squares the blade and sets the bevel angle in one easy stepThree bevel-angle range configurationsDesigned to accept flat and tapered blades, as well as blades with irregular geometryThree-position eccentric roller allows a micro-bevel to be honed quickly and accurately50mm wide roller is...
Axminster Rider Sharpening... Axminster Rider Sharpening... 2
Available
Honing Guides

Axminster Rider Sharpening Station

Axminster Rider
101171
BGN143.00
Synthetic resin laminate board 250mm(10") x 315mm(12") x 13mm(1/2")Unaffected by oil or water, easy to keep cleanFour rubber feet ensure the board will not creep in useCNC machined set-up guides for bevel angles for plane irons and chiselsDesigned to work with an Axminster Rider Honing Guide or similarStone recess 228mm x 89mm (Axminster Rider Double...
Veritas Jointer Blade...
Available
Honing Guides

Veritas Jointer Blade Sharpener

Veritas
474855
BGN147.00
Designed to restore blades dulled from normal useClamps blades up to 200mm(8") wide (including hand-plane blades)Two position stops ensure successive blades are honed identicallyCast aluminium with brass and steel fittingsIncludes a half sheet of 15 micron (approx.1000 grit) 3M micro-abrasive filmMade in Canada
Veritas Mk.II Honing System... Veritas Mk.II Honing System... 2
Available
Honing Guides

Veritas Mk.II Honing System and Camber Roller - PACKAGE DEAL

Veritas
717456
BGN170.00
Increased range, capacity and accuracyIntegral blade registration squares the blade and sets the bevel angle in one easy stepThree bevel-angle range configurationsDesigned to accept flat and tapered blades, as well as blades with irregular geometryThree-position eccentric roller allows a micro-bevel to be honed quickly and accurately50mm wide roller is...
Veritas Mk.II Standard... Veritas Mk.II Standard... 2
Available
Honing Guides

Veritas Mk.II Standard Narrow Blade Honing Guide Set

Veritas
101257
BGN194.00
Accurately sharpens narrow bladesHones bevel angles from 15° to 40°Unique guide clamps blades from 3mm(1/8") to 38mm(1.1/2")Parallel jaws to ensure blades stay square to the jigJig takes blades with bevelled or square edgesJaws keep blades centred and tight to the reference face
Axminster Rider Sharpening... Axminster Rider Sharpening... 2
Available
Honing Guides

Axminster Rider Sharpening Station Kit

Axminster Rider
717767
BGN229.00
Synthetic resin laminate board 250mm(10") x 315mm(12") x 13mm(1/2")Unaffected by oil or water, easy to keep cleanFour rubber feet ensure the board will not creep in useCNC machined set-up guides for bevel angles for plane irons and chiselsDesigned to work with an Axminster Rider Honing Guide or similarAxminster Rider Double Sided Diamond Bench Stone (1000...
Veritas Deluxe Mk.II Honing...
Available
Honing Guides

Veritas Deluxe Mk.II Honing Guide Set

Veritas
101262
BGN276.00
Most versatile Veritas honing guide set 5 piece set includes standard and narrow blade clamping heads Angle registration jig, straight roller and camber roller bases Combined heads accept blades from 3mm(1/8") to 72mm(2.7/8") wide Bases offer option of straight or slightly cambered edges Most useful sharpening aid in any workshop
Lie-Nielsen Honing Guide Lie-Nielsen Honing Guide 2
Available
Honing Guides

Lie-Nielsen Honing Guide

Lie-Nielsen
101795
BGN322.00
Solidly machined stainless steel body with a bronze bearingDesign offers consistent and repeatable controlBlade projection determines bevel angleAchievable plane blade bevel angles between 20° and 50°Optional jaws available for sharpening wide variety of blades
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text