Marking, Measuring &amp; Levels

Use to lay out or transfer measurementsSimplifies working in two axesReduces error when marking 2 dimensionsStainless-steel blade is 75mm wide and 150mm longMachine ground on all four edges.Metric graduated to 100mm on sides and end to 70mmBlade cut-out holds pencil for parallel linesHardened steel reference pins set in bodyMade in Canada

475300

BGN122.45

Veritas Carpenter's Gauge 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Marking Gauges

Veritas Carpenter's Gauge

Designed to be carried in an apron/pocketLocks vertically for usageLocks horizontally for easy storage/carryDirect reading in metric/imperialScribe circles up to 300mm(12")Made of brass, stainless steel and tough ABSMade in Canada

475905

BGN76.39

Jeweller's Double Ended Scriber 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Scribers

Jeweller's Double Ended Scriber

Other

502460

BGN36.96

Double-ended slim scriber, 100mm longCentral knurled grip, sharp, hardened tipsFine points ensure accuracy

Veritas Bar Gauge 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Bar Gauges

Veritas Bar Gauge

Greatly reduces the chances of error when transferring dimensionsIdeal for testing for squareness by checking the diagonals are equalThree styles of tip includedBall tips for inside measurementsPointed tips for inside corner measurementsMushroom-shaped tips hook over edges for outside measurementsTwo sets extension rods includedMinimum span 190mm maximum...

503967

BGN239.23

Pack of 10 replacement leads for the Easyscribe

Easyscribe Leads (Pkt 10) 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Scribers

Easyscribe Leads (Pkt 10)

Easyscribe

504766

BGN12.58

Veritas Large Mushroom Tip for Bar Gauge Heads 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Bar Gauges

Veritas Large Mushroom Tip for Bar Gauge Heads

Additional tip for the Veritas Bar GaugeMushroom-shaped, machined from solid brass35mm diameter provides a large reference faceReversible for inside measurementsWide, stable platform when taking a vertical measurementSold singularlyMade in Canada

506868

BGN27.63

Shinwa Mitre Square 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Mitre Squares

Shinwa Mitre Square

Shinwa

510015

BGN39.07

Stainless steel13mm wide x 115mm long baseCan be hooked against stock or stood upright

Axminster Workshop Pocket Vernier Caliper - 100mm 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Vernier Calipers

Axminster Workshop Pocket Vernier Caliper - 100mm

Pocket-sizedMovable head locks for comparative measurementEasy-to-read non-reflective 100mm scale calibrated to 0.05mm resolutionExternal, internal, depth and distance from an edge measurementSupplied with leatherette case

519001

BGN39.18

Maun Safety Rule - 300mm 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Cutting Scales

Maun Safety Rule - 300mm

Maun

600398

BGN12.28

Press formedChrome finishSteeply bevelled edges and deep central channelGraduated in metricLength 300mm, width 40mm, height 10mm

Axminster Workshop Handy Scriber 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Scribers

Axminster Workshop Handy Scriber

Double ended with knife edge and fine pointSuitable for marking materials including wood, metal, plastic and laminates180mm(7") overall length

610075

BGN4.37

Availability Axminster: Delivery 10-15 working days!

Dovetail Markers

Veritas Dovetail Markers

For quick and accurate marking of dovetailsSupplied as a pair - 1:6 for softwoods & 1:8 for hardwoodsBoth measure 2" x 2"Anodised aluminiumEngineer's corner on inside edges

610131

BGN42.08

Veritas Bar Gauge Heads 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Bar Gauges

Veritas Bar Gauge Heads

For comparing and transferring measurementsPerfect tool for checking squarenessRequires just two pieces of timber 3/4" x 1/4"

610134

BGN44.49

Axminster Workshop 4 Piece Square Set 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Engineer's Squares

Axminster Workshop 4 Piece Square Set

Blades made from hardened spring steelSet includes: 50mm(2"), 75mm(3"), 100mm(4") and 150mm(6")Accuracy at an economical priceSuitable for many engineering and woodworking tasks

700113

BGN77.82

Veritas Dual Marking Gauge and Shaft Clamp - PACKAGE DEAL 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Marking Gauges

Veritas Dual Marking Gauge and Shaft Clamp - PACKAGE DEAL

Veritas Dual Marking Gauge Hardened steel wheel cutters Cuts wood fibres, rather than tears Marks cleanly, even on cross grain Wheels retract into the head of the gauge for storage and protection The gauges are very easy to set Made in Canada Veritas Shaft Clamp for Dual Marking Gauge Lock the relative position of the two rods Machined to...

717714

BGN180.54

Axminster Workshop Steel Layout Square 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Layout Tools

Axminster Workshop Steel Layout Square

Steel construction with satin chrome finishGraduated in millimetresHardened steel layout edge 40mm wideKnurled thumb screw for stem lockingMaximum measuring length 200mm

900043

BGN43.60

Axminster Workshop Metric/Imperial Thread Pitch Gauge 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Thread Gauges

Axminster Workshop Metric/Imperial Thread Pitch Gauge

For checking pitch of screw threadsBoth imperial and metric pitches

900472

BGN8.79

Axminster Workshop Vernier Caliper - 150mm/6" 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Vernier Calipers

Axminster Workshop Vernier Caliper - 150mm/6"

Stainless steel with satin finishClear metric and imperial graduationsMetric scale gives readings down to 0.02mm and the imperial scale 0.001"Can be used for external, internal and depth measurement

910359

BGN63.66