Hand Tool Accessories

Combines high cutting power with exceptional wear resistanceM2 high-speed steelSuitable for all types of metal sawing

ax23222

BGN2.40

Veritas Plane Sacks 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Plane Accessories

Veritas Plane Sacks

Silicone-treated knit cotton that resists moistureKeeps dust and dirt off the planes and helps deter rust developmentProtection for expensive planes and other tools

ax792610

BGN45.69

Japanese Saw Blades

Z-Saw Blades for Japanese Dozuki-Me Tenon Saw - 240mm

Easily locked into Dozuki-Me handleStandard 50mm blade26tpi, 240mm long

ax820581

BGN38.94

Z-Saw Blades for Japanese Hassunme Saw - 250mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Z-Saw Blades for Japanese Hassunme Saw - 250mm

Crosscut leaves incredible finish on end grainRip cut, saws long grain effortlesslyReplaceable 0.5mm thick and 250mm long blades

ax820630

BGN27.54

Z-Saw Blades for Japanese Kumagoro Universal Kataba Saws 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Japanese Saw Blades

Z-Saw Blades for Japanese Kumagoro Universal Kataba Saws

Special tooth form, for rip and crosscuttingGreat when used to make mitre cutsTwo sizes 190mm or 240mm blades

ax820632

BGN26.04

Blades for Veritas Low Angle Jack & Bevel Up Planes 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Bench Plane Blades

Blades for Veritas Low Angle Jack & Bevel Up Planes

Lapped blade, 57mm(2.1/4") wideA2 blades lapped to a flatness tolerance of 0.005mm(0.0002")PM-V11 lapped to a flatness tolerance of +/-0.0127mm38° toothed blade available for difficult grain

ax821432

BGN155.56

Blades for Veritas Small Plough Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Blades for Veritas Small Plough Plane

A2 tool steel bladesLapped to a flatness tolerance of 0.005mm(0.0002")Available in five widths from 3.2mm(1/8") to 9.5mm(3/8")Made in Canada.

ax821438

BGN59.54

Blades for Veritas Large Shoulder Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Specialist Plane Blades

Blades for Veritas Large Shoulder Plane

PM-V11 steel alloy3.2mm(1/8") thick x 32mm(1.1/4") wideLapped to a flatness tolerance of 0.005mm(0.0002")

ax821442

BGN176.63

Blades for Veritas Router Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Specialist Plane Blades

Blades for Veritas Router Plane

ax821445

6.35mm(1/4") forged straight bladeTwo-piece 12.7mm(1/2") straight bladeTwo-piece 12.7mm(1/2") pointed blade (for final smoothing)Two-piece blade for ease of sharpening

A2 Blades for Veritas Scraping Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Scraper Blades

A2 Blades for Veritas Scraping Plane

Replacement 3.2 thick A2 tool steel blades73mm(2.7/8") wide, hardened to HRC 48-51Toothed blade for surface preparation

ax821447

BGN97.16

Blades for Veritas Low Angle Smoothing Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Bench Plane Blades

Blades for Veritas Low Angle Smoothing Plane

Lapped blade, 50mm(2") widePM-V11 lapped to a flatness tolerance of +/-0.0127mm

ax821473

BGN164.59

Bahco Blades for 625 Pocket Carbide Scraper 🪚 Premium Woodworking Equipment | JetTools.bg

Out of Stock: Contact us for availability options

Scraper Blades

Bahco Blades for 625 Pocket Carbide Scraper

Solid tungsten carbide bladesAvailable in four shapes25mm triangular, 25mm circular 22mm teardrop or 20mm pear shaped

ax821756

BGN28.11

Bahco Blades for 650 & 665 Carbide Scrapers 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Scraper Blades

Bahco Blades for 650 & 665 Carbide Scrapers

Double-edged solid tungsten carbide bladesDesigned for removing paint, glue, rust and varnishAvailable in two lengths; 50mm or 65mm

ax821761

BGN35.07

Hardwood file handles, smoothly finishedSteel ferrule for strength

Out of Stock: Contact us for availability options

File Handles

RST Hardwood File Handles

RST

ax822060

BGN3.43

Blades for Veritas Beading Tool 🪚 Premium Woodworking Equipment | JetTools.bg

Out of Stock: Contact us for availability options

Specialist Plane Blades

Blades for Veritas Beading Tool

16mm(5/8") wide hardened spring steel cuttersSets for reeding, beading of fluting availableBlank cutters ready to file or grind to shape

ax827490

BGN5.66

Blades for Veritas Chairmaker's Scraper 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Blades for Veritas Chairmaker's Scraper

High-carbon steel bladesConcave sizes 12.7mm(1/2") diametersConvex size 38mm(1.1/2" radius)

ax827496

BGN42.08

Blades for Ishinoko Japanese Folding Pocket Saw - 120mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Blades for Ishinoko Japanese Folding Pocket Saw - 120mm

Ishinoko

ax857232

BGN19.76

Whatever your trade, we have the bladeJapanese tooth design, fast clean cutImpulse-hardened cutting edges for maximum durabilityBlades available for cutting insulation or cardboardPlastic pipe, fine pruning, dry wood and curve cuttingAll blades are 120mm long

To fit most coping saw frame 165mm longPrecision made Swiss blades, 160mm pin to pin (6 blades per pack)Suitable for wood, plastics and some non-ferrous metals15tpi regular tooth or fast cutting 18tpi skip tooth

Pegas Coping Saw Blades 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Coping & Pad Saw Blades

Pegas Coping Saw Blades

Pegas

ax877621

BGN8.94

Z-Saw Blades for Japanese 265 Kataba Saw - 265mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Z-Saw Blades for Japanese 265 Kataba Saw - 265mm

Impulse hardened, diamond ground teeth for long-lasting performanceFast cut in larger section timber0.6mm thick and 265mm long bladeFor cutting solid wood, plywood, laminate, man-made sheet, plastics etc.

ax881032

BGN20.34

Veritas Plane Blade Cases 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Plane Accessories

Veritas Plane Blade Cases

Durable polypropylene blade casesOne-piece, hinged clamshell design with a locking claspIncludes 2 self adhesive labels and a VCI (Vapour Corrosion Inhibitor)Bevel-up blade case for all Veritas block plane blades and bevel-up planesBevel-down case for Veritas bench, Record and Stanley bench and block planesMade in the U.K.

ax885529

BGN10.78

Thor Nylon Faces 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Hammering

Thor Nylon Faces

Thor

ax900208

BGN9.03

All purpose replacement screw-in white nylon facesWill not mark finished surfacesFor light and heavy assembly workPlease note:These faces are not interchangeable with Thor orange plastic faces.

Hammering

Thor Soft Grey Plastic Faces

Thor

ax900210

BGN7.98

Online exclusiveThor GREY - SOFT PVC with Shore hardness A63-73Faces will not mar finished surfacesIdeal for flat pack furniture assembly, woodworkingPlease note:These faces are not interchangeable with Thor orange plastic faces.

Hex Adaptor for Yankee Screwdrivers 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Screwdriving

Hex Adaptor for Yankee Screwdrivers

Lee Valley

ax927317

BGN21.61

Hex bit adaptors for Yankee® screwdriversIncrease the range of bits your screwdriver will acceptAvailable in 3 shank sizes: to fit most Yankee screwdrivers

Blades for Veritas Premium Block Planes 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Block Plane Blades

Blades for Veritas Premium Block Planes

PM-V11 alloyLapped to a flatness tolerance of 0.005mm(0.0002")3.6mm(9/64") thick x 35mm(1.3/8") wide

ax932342

BGN181.44

Veritas PM-V11 Blades for Record & Stanley Planes 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Bench Plane Blades

Veritas PM-V11 Blades for Record & Stanley Planes

Extremely durable PM-V11 steel alloyHighly wear-resistant, yet easy to sharpenBlades lapped to a flatness tolerance of +/-0.0127mmMade in Canada

ax937586

BGN187.76

Veritas Cap Irons for Record & Stanley Planes 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Spare Parts & Upgrades for Planes

Veritas Cap Irons for Record & Stanley Planes

Made of corrosion-resistant A2 steel50mm(2") suitable for No.4 and 5 planes60mm(2.3/8") suitable for No.4.1/2, 5.1/2, 6 and 7 planesMade in Canada

ax937589

BGN116.13

N/A

Spare Parts & Upgrades for Planes

Veritas Blades for Custom Hand Planes

Veritas blades require minimal honing before useO1 is a modern tool steel, sharpens easily and quicklyO1 blades are hardened to HRC 58-60PM-V11 blade are hardened to HRC 61-63PM-V11 steel provides significantly greater resistance to both impact and wear

ax952865

BGN86.03

Veritas Shooting Board Track 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Plane Accessories

Veritas Shooting Board Track

Straight, durable aluminium track, make your own shooting boardGuarantees a highly accurate resultLow-friction UHMW strips let your plane glide smoothlyAdjustable for a perfect fitScrews for mounting are includedMade in Canada

ax958678

BGN167.90

Veritas O1 Blade for Mitre Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Bench Plane Blades

Veritas O1 Blade for Mitre Plane

Suitable for the Veritas mitre plane50mm(2") wide by 4.8mm(3/16") thickLapped flat for a truly sharp edge

ax958681

BGN129.37

Axminster Workshop Stair Gauge Set 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Gauge Accessories

Axminster Workshop Stair Gauge Set

Pair of brass stopsSimply clamp to a rafter squareProvides fast, repetitive setting out of angles

100053

BGN18.23

Veritas Jointer Fence 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Plane Accessories

Veritas Jointer Fence

Shoot accurate and consistent square or bevelled edgesIntegral rare earth magnets hold plane in position - easy to changeHoles in fence for screwing wedge strips when planing other bevels

100583

BGN171.51

Rider Sharpening Station 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Honing Guides

Rider Sharpening Station

Organise sharpening for consistent results every timeDesigned to work with a Rider Honing Guide or similarCNC machined recesses for sharpening stone and setting bevel anglesSupplied with Board, Strop, Paste and instructions (does not include sharpening stone)

101171

BGN209.94

Availability Axminster: Delivery 10-15 working days!

Honing Guides

Veritas Mk.II Standard Narrow Blade Honing Guide Set

Accurately sharpens narrow blades from 3mm to 38mmHones bevel angles from 15° to 40°Parallel jaws to ensure blades stay square to the jigJig takes blades with bevelled or square edgesJaws keep blades centred and tight to the reference face

101257

BGN315.99

Veritas Narrow Blade Clamp Head Only 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Honing Guides

Veritas Narrow Blade Clamp Head Only

Fits onto the standard Veritas Mk.II honing guideAccurate sharpening narrow blades 3mm to 38mmParallel jaws to ensure blades stay square to the jig

101261

BGN159.17

Availability Axminster: Delivery 10-15 working days!

Honing Guides

Veritas Deluxe Mk.II Honing Guide Set

Most versatile Veritas honing guide setHighly useful sharpening aid in any workshop5 piece set includes standard and narrow blade clamping headsAngle registration jig, straight roller and camber roller basesCombined heads accept blades from 3mm(1/8") to 72mm(2.7/8") wideBases offer option of straight or slightly cambered edges

101262

BGN413.21

Veritas Variable Angle Fence for Rebate Planes 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Plane Accessories

Veritas Variable Angle Fence for Rebate Planes

Accessory for Veritas skew rebate or jack rebate planesFor accurate and consistent angles from 45° to 135°Through-holes allow attachment of a wooden sub-fenceUse a tapered spacer for planing angles less than 45°275mm long made from aluminium and brassMade in Canada

102158

BGN236.83

Veritas Modified Skate for Beading Blade on Small Plough Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Spare Parts & Upgrades for Planes

Veritas Modified Skate for Beading Blade on Small Plough Plane

Narrower skate for use with beading cuttersFor retrofit to planes purchased prior to 1 March 2016Latest version includes modified skate

102334

BGN282.88

Axminster Professional Ruler Square/Stop 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Tape & Rule Accessories

Axminster Professional Ruler Square/Stop

Precision machined anodised aluminium body for years of useBrass locking screw won’t damage steel ruleConvert steel rule into a precision marking/measuring toolSingle knurled brass knob allows quick adjustmentsBody size is 50 x 19 x 19mmFits standard steel rule from 22mm (7/8") to 30mm (1.3/16") wide

102378

BGN22.95

Axminster Workshop Assembly Guides (Pkt 2) 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Clamping

Axminster Workshop Assembly Guides (Pkt 2)

One of the handiest things you will ever buySpeeds up assembly, fix to a bench or use as part of a homemade jig150mm x 150mm x 25mm, perfect for large or small projects

102453

BGN58.94

Blade for Rider No. 62 Low Angle Jack Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Bench Plane Blades

Blade for Rider No. 62 Low Angle Jack Plane

High carbon steel blade 4mm thick to eliminates chatterEach blade is oil quenched, for even temperingHardened to HRC 63 for a long lasting edge50mm (2") wide with 25° bevel

102729

BGN77.94

Stabila LT30 - Telescopic Laser Pole 135-365cm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Level Accessories

Stabila LT30 - Telescopic Laser Pole 135-365cm

Stabila

102945

BGN225.04

Professional Telescopic Laser Pole all steel constructionTwist-lock for rapid adjustment, lever handle locks in positionMounting-platform includes 1/4" x 20 and 5/8" x 11 tripod threadsSuitable for many other brands of laser levelDoubles up as a temporary prop, max loading of 30kgExtends from 1.35m closed to 3.65m fully extendedWeighs 2.7kg

Z-Saw Blade for Japanese Folding Pruning Saw - 210mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Z-Saw Blade for Japanese Folding Pruning Saw - 210mm

210mm long replacement blade, high quality Japanese steel0.9mm thick, 1.18mm kerf with 3.0mm pitchUniversal ground teeth for fast cutting actionNi-P plated for wear and corrosion resistance

103685

BGN22.44

Z-Saw Blade for Japanese Folding Pruning Saw - 240mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Z-Saw Blade for Japanese Folding Pruning Saw - 240mm

240mm long replacement blade, high quality Japanese steel1.0mm thick, 1.28mm kerf with 3.2mm pitchUniversal ground teeth for fast cutting actionNi-P plated for wear and corrosion resistance

103687

BGN31.74

Z-Saw Blade for Japanese Fixed Pruning Saw in Sheath - 270mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Z-Saw Blade for Japanese Fixed Pruning Saw in Sheath - 270mm

Easily changed, replacement bladeClean cutting, impulse hardened teeth, 270mm longUniversal ground teeth for fast cutting actionHigh quality Japanese steel, Ni-P plated

103689

BGN20.94

Z-Saw Blade for Japanese Heavy-Duty Carpenter's Saw - 333mm 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Japanese Saw Blades

Z-Saw Blade for Japanese Heavy-Duty Carpenter's Saw - 333mm

Replacement blade, easy to remove and fit, clips into place in secondsProfessional grade Japanese saw bladeHigh quality carbon steel with impulse hardened teeth

103691

BGN26.64

Z-Saw Blade for Japanese Hardwood Kataba Saw - 250mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Z-Saw Blade for Japanese Hardwood Kataba Saw - 250mm

Replacement blade, easy to remove and fitClips into place in secondsImpulse hardened teeth for long lasting performance

103693

BGN24.54

Z-Saw Blade for Japanese Compact Kataba Saw - 200mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Z-Saw Blade for Japanese Compact Kataba Saw - 200mm

Replacement blade, easy to remove and fitClips into place in secondsImpulse hardened teeth for long lasting performance

103695

BGN15.54

Z-Saw Blade for Japanese Double-Edged Ryoba Saw - 250mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Z-Saw Blade for Japanese Double-Edged Ryoba Saw - 250mm

250mm long double-edged bladeOne edge has teeth for fast effortless rippingOpposite edge with crosscut teeth producing clean cut surfaceMade for the Japanese professional carpenter, no compromise on quality

103697

BGN38.34

Axminster Workshop Medium Polishing & Honing Paste 250ml 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Sharpening

Axminster Workshop Medium Polishing & Honing Paste 250ml

Fast cutting; aluminium oxide, medium grade pasteUse for hand or power polishingRemoves oxidation and tarnish from stainless steel, chrome, brassLeaves a bright clean finishIdeal paste to apply to a strop, honing belt or wheel for edge toolsHelps produce the ultimate edge

103703

BGN34.16

Axminster Workshop Fine Polishing & Honing Paste 250ml 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Sharpening

Axminster Workshop Fine Polishing & Honing Paste 250ml

Professional fine grade metal polishing compoundSuitable for softer metals like aluminium, brass and copperProduces a bright finish on chrome and stainlessBlue coloured, thick paste with high abrasive contentContains wax additive to provide a protection on polished surfaceUse for hand or power polishingThe more you buff, the deeper the shineIdeal for use...

103715

BGN34.16

Axminster Workshop Super Fine Polishing & Honing Paste 250ml 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Sharpening

Axminster Workshop Super Fine Polishing & Honing Paste 250ml

Helps produce a very highly refined surfaceWhite, ultra fine, siliceous earth compoundSuitable for high precision and final polishing applicationsUse on steel, stainless steel, chrome, aluminium, brass and copperApply liberally with a soft cloth or microfibre clothWorks perfectly on acrylic and polyester pen blanksUse it to burnish friction polish on the...

103716

BGN34.16

Veritas Small Plough and Combination Plane Blade - 4mm Groove 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Specialist Plane Blades

Veritas Small Plough and Combination Plane Blade - 4mm Groove

High quality A2 tool steel with a 35° bevel angleTakes an excellent keen edgeLapped blade back, only requires minimal honingMade in Canada

104177

BGN66.76

Veritas Small Plough and Combination Plane Blade - 5mm Groove 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Specialist Plane Blades

Veritas Small Plough and Combination Plane Blade - 5mm Groove

High quality A2 tool steel with a 35° bevel angleTakes an excellent keen edgeLapped blade back, only requires minimal honingMade in Canada

104178

BGN60.74

Veritas Small Plough and Combination Plane Blade - 6mm Groove 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas Small Plough and Combination Plane Blade - 6mm Groove

High quality A2 tool steel with a 35° bevel angleTakes an excellent keen edgeLapped blade back, only requires minimal honingMade in Canada

104179

BGN61.95

Veritas Small Plough and Combination Plane Blade - 7mm Groove 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas Small Plough and Combination Plane Blade - 7mm Groove

High quality A2 tool steel with a 35° bevel angleTakes an excellent keen edgeLapped blade back, only requires minimal honingMade in Canada

104180

BGN61.95

Veritas Combination Plane Beading Blade PM-V11 - 7/16" 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas Combination Plane Beading Blade PM-V11 - 7/16"

104186

Made of PM-V11 steel with a 35° bevel angleProduces 7/16" (11mm) wide beadLapped blade back, only requires minimal honingMade in Canada

Veritas Combination Plane 2-Reed Blade PM-V11 - 1/8" 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Specialist Plane Blades

Veritas Combination Plane 2-Reed Blade PM-V11 - 1/8"

Made of PM-V11 steel with a 35° bevel angleProduces twin 1/8" (3.2mm) wide reedsLapped blade back, only requires minimal honingMade in Canada

104188

BGN67.97

Veritas Combination Plane 2-Reed Blade PM-V11 - 1/4" 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas Combination Plane 2-Reed Blade PM-V11 - 1/4"

Made of PM-V11 steel with a 35° bevel angleProduces twin 1/4" (6.35mm) wide reedsLapped blade back, only requires minimal honingMade in Canada

104194

BGN73.38

Veritas Combination Plane Fluting Blade PM-V11 - 3/16" 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas Combination Plane Fluting Blade PM-V11 - 3/16"

104196

Made of PM-V11 steel with a 35° bevel angleProduces decorative 3/16" (4.8mm) wide flute or channelLapped blade back, blade only requires minimal honingMade in Canada

Veritas Combination Plane Fluting Blade PM-V11 - 1/4" 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas Combination Plane Fluting Blade PM-V11 - 1/4"

104197

Made of PM-V11 steel with a 35° bevel angleProduces decorative 1/4" (6.35mm) wide flute or channelLapped blade back, only requires minimal honingMade in Canada

Veritas Combination Plane Fluting Blade PM-V11 - 3/8" 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas Combination Plane Fluting Blade PM-V11 - 3/8"

104198

Made of PM-V11 steel with a 35° bevel angleProduces decorative 3/8" (9.5mm) wide flute or channelLapped blade back, blade only requires minimal honingMade in Canada

Veritas Combination Plane Fluting Blade PM-V11 - 1/2" 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas Combination Plane Fluting Blade PM-V11 - 1/2"

Made of PM-V11 steel with a 35° bevel angleProduces decorative 1/2" (12.7mm) wide flute or channelLapped blade back, only requires minimal honingMade in Canada

104199

BGN73.38

Veritas Storage Box for Combination Plane Blades 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Plane Accessories

Veritas Storage Box for Combination Plane Blades

Made of strong Baltic birch plywoodSecurely stores combination and small plough plane bladesBlades stored edge up for easy recognitionCover protects blades when not in use2 boxes will store all available bladesMade in Canada

104310

BGN70.67

Veritas Storage Box for Combination Plane 🪚 Premium Woodworking Equipment | JetTools.bg

N/A

Plane Accessories

Veritas Storage Box for Combination Plane

Made of strong Baltic birch plywoodSecurely stores assembled planeSpace provided for long fence rods and blade boxesTop of box locks contents in placeHandhold cutouts for easy transportMade in Canada

104311

BGN179.34

Sharpening

Axminster Workshop Angle Checker

Ready-reference for grinding or sharpening of angles3mm thick stainless steel for durability, laser cut for accuracy8 common angles with engineer’s corner for ease of checkingLarge 94mm x 63mm body for ease of use15°, 20°, 25°, 30°, 35°, 45°, 50° and 70°

104351

BGN34.75

Veritas Mitre Box Guides 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Guides & Mitre Boxes

Veritas Mitre Box Guides

Self-lubricating, tough, durable guidesCustom build or upgrade a standard mitre boxSet includes 45°, 90° and 135° guidesElongated mounting hole for close adjustmentProvides fast and accurate guide for mitre cuts

104631

BGN49.30

Out-of-Stock

Clamping

Axminster Professional G Clamp Rack

Suitable for any size G clamp from 75m to 250mm, holds 10 G-clamps2mm thick steel, tough painted finish, pre-drilled for wall mountingQuick and easy retrieval of clamps; made in the UK

104700

BGN44.19

Axminster Professional Bar Clamp Rack 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Clamping

Axminster Professional Bar Clamp Rack

Organise unruly long clamps, F clamps, sash clamps, parallel jaw clamps etcExtra heavy gauge steel up to 25kg load capacity, holds up to 12 clampsPre-drilled for wall mounting; made in the UK

104701

BGN70.74

Veritas Universal Variable Angle Plane Fence 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Plane Accessories

Veritas Universal Variable Angle Plane Fence

280mm long, fits Veritas, Stanley, Record planes and moreQuick and easy to fit, left or right sideDesign accommodates many different sizes and geometriesAllows accurate planing of angles from 45° to 135°Through-holes for attaching wooden sub-fenceNote: Veritas Jack Rebate, Veritas Bevel-up Jointer, Veritas Shooting Board and Veritas custom bench planes...

104774

BGN206.73

Veritas Pair Of Mounting Knobs For Universal Fence 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Plane Accessories

Veritas Pair Of Mounting Knobs For Universal Fence

Pair of stainless steel threaded knobsEnsure secure fitting of the Veritas universal plane fenceScrew directly into holes in plane’s bodyRequired for the following Veritas planes only:Jack Rebate, Bevel-up Jointer, Shooting Board, custom bench

104776

BGN20.41

Japanese Saw Blades

Shokunin Blade for Japanese Ryoba Saw - 210mm

Replacement or spare Japanese saw bladeFits Shokunin 210mm Ryoba sawDouble-edged; cross cut and rip cutEasy change, single screw fixing

105004

BGN31.85

Shokunin Blade for Japanese Ryoba Saw - 240mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Shokunin Blade for Japanese Ryoba Saw - 240mm

Replacement or spare Japanese saw bladeFits Shokunin 240mm Ryoba sawDouble-edged; cross cut and rip cutEasy change, single screw fixing

105006

BGN33.65

Shokunin Blade for Japanese Ryoba Saw - 270mm 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Japanese Saw Blades

Shokunin Blade for Japanese Ryoba Saw - 270mm

Replacement or spare Japanese saw bladeFits Shokunin 270mm Ryoba sawDouble-edged; cross cut and rip cutEasy change, single screw fixing

105008

BGN38.77

Shokunin Blade for Japanese Tatebiki Saw - 240mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Shokunin Blade for Japanese Tatebiki Saw - 240mm

Replacement or spare Japanese saw bladeFits Shokunin 240mm Tatebiki saw0.3mm thick with fine pitch rip-cutting teethEasy change, single screw fixing

105010

BGN32.45

Shokunin Blade for Japanese Dozuki Saw - 240mm 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Japanese Saw Blades

Shokunin Blade for Japanese Dozuki Saw - 240mm

Replacement or spare Japanese saw blade0.3mm thick with fine pitch crosscutting teethEasy change, single screw fixing

105012

BGN50.81

Shokunin Blade for Japanese Kataba Saw - 240mm 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Japanese Saw Blades

Shokunin Blade for Japanese Kataba Saw - 240mm

Replacement or spare Japanese saw bladeFits Shokunin 240mm Kataba saw1.9mm tooth pitch crosscutting teethSuitable for soft and hard wood, plywoodEasy change, single screw fixing

105014

BGN25.52

Shokunin Blade for Japanese Atsuba Saw - 180mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Shokunin Blade for Japanese Atsuba Saw - 180mm

Replacement or spare Japanese saw bladeCurved tip for making cutouts in panelsEasy change, single screw fixing

105016

BGN28.23

Shokunin Blade for Japanese Jushi Saw - 180mm 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Japanese Saw Blades

Shokunin Blade for Japanese Jushi Saw - 180mm

Replacement or spare Japanese saw bladeIdeal for accurate dovetails, precise, thin kerf, tear-free cutsCuts hard plastics and PVC pipe etcEasy change, single screw fixing

105018

BGN27.93

Z-Saw Blade for Japanese Small Dozuki Panel Saw - Standard 150mm 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Japanese Saw Blades

Z-Saw Blade for Japanese Small Dozuki Panel Saw - Standard 150mm

150mm bladeEasily clips into Small Dozuki handle

110049

BGN17.94

Limited Availability: Contact us for delivery times

Hacksaw Blades

Irwin Bi-Metal Hacksaw Blades 24tpi - 300mm (Pkt 2)

Irwin

134876

BGN16.50

Safer than HSS bladesFlexible & shatter resistantSuitable for use on a variety of metals

Monument 2348Q Glass Fibre Plumber's Mat - 300 x 250mm 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Brazing & Soldering

Monument 2348Q Glass Fibre Plumber's Mat - 300 x 250mm

Monument

135216

BGN77.99

Online exclusiveResists temperatures up to 600° CDoes not present any of the hazards associated with asbestos materialsMade from glass fibre fabric, size 300 X 250mm

Veritas Mk.II Honing System 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Honing Guides

Veritas Mk.II Honing System

Sharpen plane irons and chisels; blades from 12mm to 72mm wideBevel angles from 15° to 54°, consistent and repeatableBlade-registration jig for fast and foolproof set-up3-position eccentric roller for micro bevelsWide roller offers greater stability

200810

BGN198.60

Tape & Rule Accessories

Veritas Metric Bevel Setter

Stainless steelAllows a sliding bevel to be set at any angle from 1° to 60° in 1/2° incrementsCan be used in conjunction with a bevel to check existing anglesThe reverse has common dovetail and polygon anglesMetric Graduations

202376

BGN104.09

Veritas Dovetail Saw for Saw Guide 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Guides & Mitre Boxes

Veritas Dovetail Saw for Saw Guide

Specifically designed for the Veritas Dovetail Guides22 tpi with only 0.127mm of tooth setDozuki tooth form effective for crosscuts and rip cuts

202379

BGN95.36

Veritas Right-Angle Saw Guide 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Guides & Mitre Boxes

Veritas Right-Angle Saw Guide

Manufactured from precision-machined aluminium extrusion with brass fittingsMagnets keep the saw alignedUse with virtually any backless saw, effective in both cross and rip cuts

202387

BGN144.42

Veritas Skew Registration Jig 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Honing Guides

Veritas Skew Registration Jig

Accessory for the Veritas Mk.II honing guideSets both skew and bevel anglesAluminium base has the angles laser etched

202390

BGN109.80

Check for flatness or twist of a boardMade from extruded aluminiumSatin black anodised finish on one side reduces glare

Lee Valley Aluminium Winding Sticks 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Plane Accessories

Lee Valley Aluminium Winding Sticks

Lee Valley

202398

BGN113.42

Veritas Camber Roller 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Honing Guides

Veritas Camber Roller

Specifically designed for the Veritas Mk.II Honing GuideSolid brass barrel-shaped roller; Simply replaces standard roller assemblyAllows slight curvature with an accurate and consistent bevel angle

202489

BGN88.43

Veritas Plane Screwdriver 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Plane Accessories

Veritas Plane Screwdriver

Makes it easy to remove, replace or adjust cap ironsTurned brass collar captures screw headGenerous hardwood knob for a comfortable, secure gripScrewdriver tip durable alloy steelFits all standard cap iron screws on current and vintage Record and Stanley planes as well as othersMade in Canada

210904

BGN86.93

Collet holder suitable for all needle filesHand-tightened, quick changeSuitable for practically all needle files

Electro Needle File Handle with Collet - 110mm 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

File Handles

Electro Needle File Handle with Collet - 110mm

Electro

300189

BGN19.50

Axminster Workshop Honing Guide 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Honing Guides

Axminster Workshop Honing Guide

Removes guesswork from setting bevel anglesFor bevel edge or firmer chisels and plane ironsAll metal construction

340147

BGN28.85

Ice Bear Ceramic Flattening Stone 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Sharpening

Ice Bear Ceramic Flattening Stone

Ice Bear

368770

BGN36.47

For easy flattening or resurfacing Japanese waterstones150 gritWill never wear out in normal use

Out-of-Stock

Hacksaw Blades

Bahco Junior Hacksaw Blades (Pkt 10)

Online exclusiveBlades to fit various Junior hacksaws

410867

BGN13.98

Axminster Workshop Non-Skid Holder 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Sharpening

Axminster Workshop Non-Skid Holder

Holds waterstones up to 210mm longRubber holders at either end with central rubber support blockNon-slip grips on underside

417123

BGN62.78

Bahco Coping Saw Blades (Pkt 5) 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Coping & Pad Saw Blades

Bahco Coping Saw Blades (Pkt 5)

Online exclusiveTo fit 301 Coping Saw and most others14tpi, 160mm pin to pin5 per Pack

431435

BGN12.39

Veritas Jointer Blade Sharpener 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Honing Guides

Veritas Jointer Blade Sharpener

Designed to restore blades dulled from normal useClamps blades up to 200mm(8") wide (including hand-plane blades)Two position stops ensure successive blades are honed identicallyCast aluminium with brass and steel fittingsIncludes a half sheet of 15 micron (approx.1000 grit) 3M micro-abrasive filmMade in Canada

474855

BGN235.32

Veritas Bevel-Up Jointer Fence 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Plane Accessories

Veritas Bevel-Up Jointer Fence

Consistent and accurate square or bevelled edges280mm long anodised aluminiumCan be attached to either side of the plane

475146

BGN117.03

Veritas Chamfer Guide 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Plane Accessories

Veritas Chamfer Guide

Converts a Block Plane into a chamfer planeEasy to install, adjustable for chamfers up to 13mm wideHolds the plane body at a consistent 45°

475863

BGN89.04

Veritas Square Fence 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Tape & Rule Accessories

Veritas Square Fence

200mm long aluminium extrusion easily attaches with brass screwsSquare fence face aligns with the edge of the workOne side offers a 25mm high face, the opposite side has a 6mm faceIdeal for use on round edge material and sheet stock

475961

BGN79.70

Veritas Small Blade Holder 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Honing Guides

Veritas Small Blade Holder

Blade holder may be mounted in a honing guide, or used free hand for sharpeningHolds short blades such as spokeshave blades when sharpeningEffectively transforms your short blade into something larger (38 x 100mm long)

475978

BGN68.87

Veritas Rule Stop 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Tape & Rule Accessories

Veritas Rule Stop

For setting saw fences, repeat cuts etcSlide the stop over the rule end and tightenWill not mar the rule's edgeKnurled tip of brass adjustment screwSecurely clamps even the thinnest rulesRepositioning is fast and easyAnodised & contoured aluminium bodySuits rules from 22mm(7/8") to 28.5mm(1.1/8") wideUp to 1.25mm(0.05") thickMade in Canada

476679

BGN44.49

Blade for Veritas Cabinet Scraper 🪚 Premium Woodworking Equipment | JetTools.bg

N/A

Scraper Blades

Blade for Veritas Cabinet Scraper

Replacement for the Veritas Cabinet ScraperAlso fits the Stanley number 80 cabinet scraper

477459

BGN51.11

Veritas Wheel for Marking Gauges 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Gauge Accessories

Veritas Wheel for Marking Gauges

Replacement wheel for Veritas gaugesMade in Canada

477717

BGN12.88

Ice Bear Japanese Saw Case 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Saw Sharpening & Care

Ice Bear Japanese Saw Case

Ice Bear

502253

BGN43.50

Safely stores up to four saws in separate divisions760mm long internal pocketTwo additional external pocketsTough closely woven nylon with reinforcementAdjustable shoulder strap and hanging loopMade in Japan

Veritas Extension Rods for Bar Gauge Heads 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Gauge Accessories

Veritas Extension Rods for Bar Gauge Heads

Increases the range of the Veritas Bar Gauge Set by 610mmUseful when comparing the diagonals of larger projectsEach pack comprises 2 x 305mm rodsMade in Canada

503968

BGN49.00

Blade for Lee Valley Cast Round Spokeshave 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Blade for Lee Valley Cast Round Spokeshave

Lee Valley

506359

35mm(1.3/8") x 2.4mm(3/32") thickPM-V11 alloy steel

Blade for Rider No. 271 Small Router Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Specialist Plane Blades

Blade for Rider No. 271 Small Router Plane

Width 1/4"O1 spring steel

506486

BGN34.14

Blade for Rider No. 9 1/2 and 69 1/2 Block Planes 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Block Plane Blades

Blade for Rider No. 9 1/2 and 69 1/2 Block Planes

41mm wideO1 spring steel, hardened and tempered to RC633mm thick

506543

BGN32.94

Blade for Rider No. 60 1/2 Block Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Block Plane Blades

Blade for Rider No. 60 1/2 Block Plane

35mm wide3mm thickO1 spring steel, hardened and tempered to RC63

506544

BGN32.94

Blade for Rider No. 92 Shoulder Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Specialist Plane Blades

Blade for Rider No. 92 Shoulder Plane

506545

19mm wideO1 spring steel

Blade for Rider 3-in-1 & 2-in-1 Planes 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Specialist Plane Blades

Blade for Rider 3-in-1 & 2-in-1 Planes

506546

O1 spring steel27mm wide

Blade for Rider No. 151 Spokeshaves 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Specialist Plane Blades

Blade for Rider No. 151 Spokeshaves

506547

54mm wideO1 spring steelSuitable for flat or convex sole Rider spokeshaves

Blade for Rider No. 80 Scraper Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Scraper Blades

Blade for Rider No. 80 Scraper Plane

Availability Axminster: Delivery 10-15 working days!

Specialist Plane Blades

Blade for Rider Duplex Rebate Plane

506549

BGN37.14

O1 spring steel38mm wide

Blade for Rider No. 90 Bull Nose Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Blade for Rider No. 90 Bull Nose Plane

506550

25.4mm wideO1 spring steel

Veritas Jointer & Edger 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Saw Sharpening & Care

Veritas Jointer & Edger

Use for topping off teeth prior to re-sharpening sawsProvides an accurate guide for filing edges of cabinet scrapers45° guide face for sharpening scraper and plane blades

600304

BGN61.95

Axcaliber Set of Knives for MT1 Mitre Trimmer 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Mitre Trimming

Axcaliber Set of Knives for MT1 Mitre Trimmer

Axcaliber

610091

BGN272.09

Heavy-duty replacement knives for the MT1 Mitre TrimmerSuper sharp, please take care when handlingProduce a glass-like finish on the toughest end grain

Plane Accessories

Veritas Fence for Router Plane

Stainless steel and aluminiumCan be positioned on either side of the planeWork on both straight and curved pieces

701928

BGN88.73

Veritas Sharpening Jig for 1/2" Router Plane Blades 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Plane Accessories

Veritas Sharpening Jig for 1/2" Router Plane Blades

Either of the 1/2" blades can be attched to this jigTurns the task of sharpening into a much more normal procedure

701933

BGN16.80

Blade for Veritas Small Router Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Specialist Plane Blades

Blade for Veritas Small Router Plane

High-carbon steel blade6.35mm(1/4") wide

701935

BGN34.86

Veritas Mk.II Honing System and Camber Roller - PACKAGE DEAL 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Honing Guides

Veritas Mk.II Honing System and Camber Roller - PACKAGE DEAL

Veritas Mk.II Honing SystemIncreased range, capacity and accuracyIntegral blade registration squares the blade and sets the bevel angle in one easy stepThree bevel-angle range configurationsDesigned to accept flat and tapered blades, as well as blades with irregular geometryThree-position eccentric roller allows a micro-bevel to be honed quickly and...

717456

BGN270.84

Limited Availability: Contact us for delivery times

Honing Guides

Rider Sharpening Station Kit

Organise sharpening for consistent razor sharp edges every timeKit includes double sided diamond stone and stropDesigned to work with a Rider Honing Guide or similarSupplied with Board, Diamond stone, Strop, Paste and instructions

717767

BGN284.94

Axminster Workshop Tool Care Kit 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Plane Accessories

Axminster Workshop Tool Care Kit

Helps keep planes and other fine tools in tip top conditionFine grade rubberised abrasive block240ml Camellia Oil with special oil applicator

719725

BGN94.34

Axminster Professional Bar & G-Clamp Racks Package 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Clamping

Axminster Professional Bar & G-Clamp Racks Package

Extra heavy 2mm thick steel, tough painted finishPre-drilled for wall mountingAxminster Professional Bar Clamps RackFor F clamps, sash, bar or parallel jaw clamps etcOrganises unruly long clampsHolds 12 clamps or up to 25kg load capacity12mm wide slots, for easy retrievalAxminster Professional G Clamps RackHolds 10 G clampsSuitable for any size G clamp...

720588

BGN103.19

Veritas Long Fence Rod for Skew Block Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Plane Accessories

Veritas Long Fence Rod for Skew Block Plane

82mm(3.1/2") long, stainless-steelAllows for a thicker fence extensionWithout restricting cutting width

950941

BGN24.02

Gauge Accessories

Veritas Shaft Clamp for Dual Marking Gauge

Lock the relative position of the two rodsMachined to precise tolerances to prevent binding on the rods13mm long collar is made from extruded aluminiumTurned brass thumbscrewMade in Canada

952932

BGN31.54

Rider Dusting Brush 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Plane Accessories

Rider Dusting Brush

Removes dust and shavings from planesHandy size as general bench brushResin bound grey synthetic filamentTraditional style dusting brushBeechwood stock and turned handle100mm wide; bristle length: 70mmMade in UK

105566

BGN40.44

Veritas Straight Blade For Router Plane - 5mm 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas Straight Blade For Router Plane - 5mm

105031

High-carbon steel router plane bladesSuitable for Stanley #71 with height-adjustment nut invertedNarrow single-piece blade

Veritas Straight Blade For Router Plane - 6mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Specialist Plane Blades

Veritas Straight Blade For Router Plane - 6mm

105032

High-carbon steel router plane bladesSuitable for Stanley #71 with height-adjustment nut invertedNarrow single-piece blade

Veritas Straight Blade For Router Plane - 3/32" 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas Straight Blade For Router Plane - 3/32"

105033

High-carbon steel router plane bladesSuitable for Stanley #71 with height-adjustment nut invertedNarrow single-piece blade

Veritas Straight Blade For Router Plane - 3/16" 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas Straight Blade For Router Plane - 3/16"

105034

High-carbon steel router plane bladesSuitable for Stanley #71 with height-adjustment nut inverted)Narrow single-piece blade

Veritas PM-V11 Blade for Low Angle Smoothing Plane - 50° 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas PM-V11 Blade for Low Angle Smoothing Plane - 50°

50° bevel increases cutting angleOffers better finish when working wild or difficult grainBlades lapped to a flatness tolerance of +/-0.0127mmMade in Canada

105391

BGN147.43

Plane Accessories

Veritas Shooting Board Right Hand

Highly accurate, shoot any angle between 0° and 60°8 pre-set indents for quick setting of common anglesMake frames with 3, 4, 5, 6, 7, 8 or 10 sidesDurable aluminium track with low friction stripsFits Veritas shooting plane and shooting sanderAdjustable for other planesThick, stable Baltic birch ply baseMade for right-hand use

105587

BGN818.66

Veritas Shooting Board Left Hand 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Plane Accessories

Veritas Shooting Board Left Hand

Availability Axminster: Delivery 10-15 working days!

Clamping

Axminster Professional Pair of Clamp Supports

Spare/replacement work supportsFor the Axminster HD Parallel Jaw ClampPrevents work from direct contact with the bar, pack of 2

106445

BGN11.15

Axminster Professional Replacement Pads For HD Parallel Clamps 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Clamping

Axminster Professional Replacement Pads For HD Parallel Clamps

Spare/replacement glue resistant pads/jaw linersFor the Axminster HD Parallel Jaw ClampHelp protect work from marks and bruising, pack of 3

106446

BGN18.82

Axminster Professional Support End Cap For Clamps 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Clamping

Axminster Professional Support End Cap For Clamps

Spare/replacement end support capFor the Axminster HD Parallel Jaw ClampKeeps clamp upright and level, supplied singly

106447

BGN7.91

Veritas PM-V11 Blade for Low Angle Jack Plane - 50° 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Bench Plane Blades

Veritas PM-V11 Blade for Low Angle Jack Plane - 50°

50° bevel increases cutting angleOffers better finish when working wild or difficult grainBlades lapped to a flatness tolerance of +/-0.0127mmMade in Canada

105392

BGN210.04

Veritas Shooting Board Fence 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Plane Accessories

Veritas Shooting Board Fence

Shoot mitres at virtually any angleFixed detents at 0, 18, 22.5, 25.7, 30, 36, 45 and 60°For mounting onto homemade shooting boardMake frames with 3, 4, 5, 6, 7, 8 or 10 sidesStrong zinc-aluminium alloy castingSteel and brass fittingsPrecision-machined for accuracy

105999

BGN403.88

Veritas Norris Style Adjuster Upgrade Type A 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Plane Accessories

Veritas Norris Style Adjuster Upgrade Type A

Upgrade your Veritas bevel-up planeEasy retrofit, simply replaces standard adjusterVery fine thread makes setting depth of cut far more precise.Fits the bevel-up smoother, bevel-up jointer & low-angle jackAlso fits the low-angle smoother & low-angle blockMade in Canada

102523

BGN62.55

Veritas Norris Style Adjuster Upgrade Type B 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Plane Accessories

Veritas Norris Style Adjuster Upgrade Type B

Upgrade your Veritas bevel-up planeEasy retrofit, simply replaces standard adjusterVery fine thread makes setting depth of cut far more precise.Fits the small bevel-up smoother, jack rebate & shooting planesMade in Canada

102524

BGN59.54

Veritas PM-V11 Blade For Concave Spokeshave 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Spokeshave Blades

Veritas PM-V11 Blade For Concave Spokeshave

Perfect upgrade for Veritas Concave SpokeshaveExtremely durable PM-V11 steel alloyHighly wear-resistant, yet easy to sharpenBlades lapped to a flatness tolerance of +/-0.0127mmMade in Canada

105218

BGN105.29

Blades for Veritas Nos. 4 & 5.1/4 Planes 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Bench Plane Blades

Blades for Veritas Nos. 4 & 5.1/4 Planes

Lapped blade, 50mm(2") wide, 3.2mm(1/8") thickLapped to a flatness tolerance of 0.005mm(0.0002")PM-V11 lapped to a flatness tolerance of +/-0.0127mm

ax821474

BGN211.84

Veritas PM-V11 Blade for Jack Rebate Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas PM-V11 Blade for Jack Rebate Plane

Extremely durable PM-V11 steel alloyHighly wear-resistant, yet easy to sharpenBlades lapped to a flatness tolerance of +/-0.0127mmMade in Canada

502394

BGN210.64

Z-Saw Blade for Japanese Dozuki-Me Tenon Saw - Hardwood 240mm 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Japanese Saw Blades

Z-Saw Blade for Japanese Dozuki-Me Tenon Saw - Hardwood 240mm

Specially designed blade for cutting hardwoodRobust teeth with fine 21tpi teethCross, rip and mitre cuts with equal precision

106615

BGN39.84

Z-Saw Blade for Japanese Small Dozuki Panel Saw - Hardwood 150mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Z-Saw Blade for Japanese Small Dozuki Panel Saw - Hardwood 150mm

Specially designed blade for cutting hardwoodFits the small Dozuki saw, robust teeth with fine 21tpiCross, rip and mitre cuts with equal precision

106619

BGN24.54

Z-Saw Blade for Japanese Small Dozuki Panel Saw - Fine 150mm 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Z-Saw Blade for Japanese Small Dozuki Panel Saw - Fine 150mm

Extra fine dozuki saw blade, tooth pitch of 25tpiPerfect for woodwork requiring the utmost precisionOnly 0.30mm blade thickness, very clean cuts in softwoods

106618

BGN24.54

Veritas Clamp Rails 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Clamping

Veritas Clamp Rails

Make glue-ups easier and more efficientRails hold clamps upright and in positionSuitable for sash, parallel or pipe clampsUse on bench, workmate or multifunction workbenchEach rail 760mm long, machined birch plywoodIncludes 4 Veritas platform saddles

106620

BGN106.19

Plane Accessories

Veritas Hand Jointer

Accurately joint small parts by handTakes the work to the plane rather than plane to the workFits the Veritas medium or large shoulder planesLow-friction HDPE fenceEasy to set up, use vertically or horizontallySafe and controllable way to joint small parts

106744

BGN145.02

Veritas Miniature Honing Guide MK.I 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Honing Guides

Veritas Miniature Honing Guide MK.I

Fully functional helps keep miniature blades in peak conditionWorks well with most small or narrow bladesAccepts blades up to 19mm wideDie-cast aluminium body with brass rollerAngle-setting jig has 5 common bevel anglesComes in a French-fitted leatherette presentation boxMade in Canada

106746

BGN130.87

Veritas PM-V11 Blade for Medium Shoulder Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Specialist Plane Blades

Veritas PM-V11 Blade for Medium Shoulder Plane

PM-V11 alloy steel blade17.5mm(11/16") wide x 3.2mm(1/8") thickLapped to a flatness tolerance of 0.005mm(0.0002")

506342

BGN146.23

Veritas PM-V11 Blade for Small Shoulder Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas PM-V11 Blade for Small Shoulder Plane

12.7mm(1/2") wide x 3.2mm(1/8") thickLapped to a flatness tolerance of 0.005mm(0.0002")

506340

BGN141.11

Tormek EM-15 Edge Marker 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Sharpening

Tormek EM-15 Edge Marker

Tormek

107584

BGN14.99

High-quality, permanent marker with a chisel tipColour the bevel of the tool before you begin sharpeningHighlights the point of contact and helps monitor progress

Veritas Replacement Roller for MKII Honing Guide 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Honing Guides

Veritas Replacement Roller for MKII Honing Guide

Smooth running, replacement straight roller assemblyFits the Veritas MkII Honing guideRestores the guide to peak performance

106864

BGN43.28

Bahco 23-30 Raker Tooth Hard Point Bowsaw Blade 755mm 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Bow Saw & Pruning Saw Blades

Bahco 23-30 Raker Tooth Hard Point Bowsaw Blade 755mm

Online exclusiveHard point bowsaw bladeRaker toothing, designed for use on green woodFits most makes of bowsaw frame755mm blade length

117761

BGN15.48

Bench Plane Blades

Rider Plane Blade for No.4.1/2, 5.1/2, 6 & 7 Bench Planes - 60mm

British made high quality plane blade, 60mm (2.3/8") wide, 3mm thickO1 high carbon tool steel Hardened and tempered to HRC 61-64Fits No.4.1/2, No.5.1/2, No.6 & No.7 bench planes (see note)

107806

BGN86.34

Rider Plane Blade for No.4 & No.5 Bench Planes - 50mm 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Bench Plane Blades

Rider Plane Blade for No.4 & No.5 Bench Planes - 50mm

British made high quality plane blade, 50mm (2") wide, 3mm thickO1 high carbon tool steel Hardened and tempered to HRC 61-64Fits No. 4 and No. 5 bench planes (see note)

107805

BGN80.04

UJK Parf Guide System Parf Stick Connector 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Tape & Rule Accessories

UJK Parf Guide System Parf Stick Connector

UJK

107895

BGN16.18

Connects UJK Parf Sticks when drilling narrow benchesEnsures accurate layoutMaintains 3:4:5 triangle

UJK Clamp Stand (Pkt 4) 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Clamping

UJK Clamp Stand (Pkt 4)

UJK

107511

BGN59.97

Support your clampsTake the stress out of glue-up and clampingStands attach to Parf anchor dogs or screw onto a board

Veritas Short-Blade Honing Guide 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Honing Guides

Veritas Short-Blade Honing Guide

Problem solved, sharpen small bladesFoolproof guide for spokeshave and short bladesBlades up to 66mm wide and 6.35mm thick

108354

BGN190.17

Veritas Side-Clamping Honing Guide 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Honing Guides

Veritas Side-Clamping Honing Guide

Sharpen a wide range of bladesEnsures consistent bevel anglesFor chisels and plane blades; 3mm to 63mm wide

108353

BGN134.19

Blades for Veritas Bull Nose Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Blades for Veritas Bull Nose Plane

PM-V11 steel alloyLapped to a flatness tolerance of 0.005mm(0.0002")25.4(1") wide, 3.2mm(1/8") thick

506347

BGN147.43

Blades for Veritas Low Angle Block Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Block Plane Blades

Blades for Veritas Low Angle Block Plane

25° bevel blade, 3.2mm(1/8") thickPM-V11 lapped to a flatness tolerance of +/-0.0127mm

503969

BGN150.14

Blades for Veritas Small Bevel-Up Bench Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Bench Plane Blades

Blades for Veritas Small Bevel-Up Bench Plane

Lapped blade, 44mm(1.3/4") widePM-V11 lapped to a flatness tolerance of +/-0.0127mm

503975

BGN166.39

Veritas Wooden Plane Hardware Kit 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Spare Parts & Upgrades for Planes

Veritas Wooden Plane Hardware Kit

Norris style adjusterDetailed instructions suppliedSuitable timber of choice for the body requiredPM-V11 blade

717636

BGN210.64

Blades for Veritas Nos. 4.1/2 & 6 Planes

Availability Axminster: Delivery 10-15 working days!

Bench Plane Blades

Blades for Veritas Nos. 4.1/2 & 6 Planes

Lapped blade, 60mm(2.3/8") wide, 3.2mm(1/8") thickPM-V11 lapped to a flatness tolerance of +/-0.0127mm

503970

BGN221.78

Veritas PMV11 Blade For Scrub Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas PMV11 Blade For Scrub Plane

38mm(1.1/2") wide by 4.7mm(3/16") thickEdge is ground with a 75mm(3") radius for an aggressive cutPM-V11 steel blade lapped to a flatness tolerance of +/-0.0127mmMade in Canada

108563

BGN166.39

Rider Shooting Board 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Plane Accessories

Rider Shooting Board

Perfect for the final, precise squaring of end grainStable Phenolic sheet with adjustable hardwood fenceSuitable for most bench planes, left or right handed use

108509

BGN269.94

Rider Shooting Board Mitre Square 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Plane Accessories

Rider Shooting Board Mitre Square

Precision CNC cut from Valchromat; HDF boardShoot mitres on each side for spot-on joints every timeClamping slots, allow use as an assembly square

108508

BGN92.94

Lee Valley Replica Honing Guide 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Honing Guides

Lee Valley Replica Honing Guide

Inspired by the original Stanley No. 50 honing gaugeHoning guide for bench plane ironsFits blades with a minimum 7/16" (11mm) wide slotBevel angle of 25° and honing angle of 30°Made from brass, aluminium and stainless steel

109382

BGN81.21

Narex Gunsmith Screwdrivers 🪚 Premium Woodworking Equipment | JetTools.bg

Out of Stock: Contact us for availability options

Plane Accessories

Narex Gunsmith Screwdrivers

Narex

ax1054664

BGN33.05

Precise screwdrivers for precise adjustmentsUse to adjust planes and other toolsTips slightly hollow ground to ensure a perfect fitShort flat blades for greater controlKnurled brass ferrule for fingertip manipulation

Narex Spare Plastic Mallet Face 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Hammering

Narex Spare Plastic Mallet Face

Narex

ax1054757

BGN3.85

Replacement, plastic mallet facesAvailable in black or whiteAvailable in sizes 1,2 or 3

Narex Spare Rubber Mallet Face 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Hammering

Narex Spare Rubber Mallet Face

Narex

109476

BGN7.46

Replacement, resilient rubber mallet faceFits the Narex Rubber Faced Mallet (109475)

Veritas Miniature Shooting Board 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Plane Accessories

Veritas Miniature Shooting Board

Use with the Veritas Miniature Shooting PlaneFor the final, precise squaring of end grainPerfect for squaring small wooden partsBase measures 203mm x 92mmMade in Canada

109628

BGN67.36

Blades for Veritas Apron Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Block Plane Blades

Blades for Veritas Apron Plane

PM-V11 3.2mm(1/8") thick31.75mm(1.1/4") wideLapped to a flatness tolerance of 0.005mm(0.0002")

506330

BGN114.32

Veritas Box-maker's Blade 1/4" LH Plough Plane 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Specialist Plane Blades

Veritas Box-maker's Blade 1/4" LH Plough Plane

Blade for left hand plough planeA2 tool steel bladesLapped to a flatness tolerance of 0.005mm(0.0002")Made in Canada

109751

BGN59.54

Axminster Workshop 50mm Chip Breaker 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Spare Parts & Upgrades for Planes

Axminster Workshop 50mm Chip Breaker

Chip breaker design reduces vibration when plane is in useMade from 3mm thick stock, the added thickness helps to stabilise the cutting edgeFits No.4 and No.5 planes

110511

BGN63.07

Axminster Workshop 60mm Chip Breaker 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Spare Parts & Upgrades for Planes

Axminster Workshop 60mm Chip Breaker

Chip breaker design reduces vibration when plane is in useMade from 3mm thick stock, the added thickness helps to stabilise the cutting edgeFits No.4.1/2, No.5.1/2, No.6 and No.7 planes

110510

BGN63.07

Bahco 301 Coping Saw 165mm (6.1/2") 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Coping & Pad Saw Blades

Bahco 301 Coping Saw 165mm (6.1/2")

112248

BGN39.45

Bahco Dry Wood Bowsaw Blade 533mm(21") 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Bow Saw & Pruning Saw Blades

Bahco Dry Wood Bowsaw Blade 533mm(21")

Replacement blade for the Bahco BowsawPeg tooth for cutting dry wood and general applications

810340

BGN17.07

Axminster Workshop 50mm Plane Blade 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Bench Plane Blades

Axminster Workshop 50mm Plane Blade

Cryogenically treated high carbon steel plane blade, 50mm(2") wide, approx 2.8mm thickComes with a 25° bevelFits No 4 and No 5 planes

109779

BGN42.72

Axminster Workshop 60mm Plane Blade 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Bench Plane Blades

Axminster Workshop 60mm Plane Blade

Cryogenically treated high carbon steel plane blade, 60mm(2.3/8") wide, approx 2.8mm thickComes with a 25° bevelFits No.4.1/2, No.5.1/2, No.6 and No.7 planes

109780

BGN50.68

Axminster Workshop No 1 Plane Blade 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Bench Plane Blades

Axminster Workshop No 1 Plane Blade

High quality, 30mm wide plane bladeHigh carbon steel, hardened and tempered to 60-62 Rockwell HRCFits the Axminster Workshop No.1 Bench Plane

111862

BGN35.93

Rider Cap Iron Screw 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Plane Accessories

Rider Cap Iron Screw

High quality stainless steel offers durability and resistance to wear and corrosionKeeps the cap iron firmly in place for optimal performancePrevents damage to the cap iron, enhancing the longevity of your planeEnsures stable and precise planningSimple to install and replace for convenient maintenanceThread: 5/16" UNC

109899

BGN5.34

Shokunin Dozuki Super Hard Saw Blade 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Japanese Saw Blades

Shokunin Dozuki Super Hard Saw Blade

Replacement blade for Shokunin Dozuki Super Hard SawsImpulse-hardened teeth for fine crosscutsRustproof nickel plating for enhanced durability0.3mm thick blade with a 1.5mm tooth pitchStiff spine for stability and a 50mm depth of cutSuitable for both soft and hard woods

110852

BGN55.02

Shokunin Dozuki Universal Saw Blade 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Japanese Saw Blades

Shokunin Dozuki Universal Saw Blade

Replacement blade for Shokunin Dozuki Universal SawsImpulse-hardened teeth for precision and durabilityRustproof nickel plating for corrosion resistance0.3mm thick blade with a 1.5mm tooth pitchStiff spine for stability and a 50mm depth of cutSuitable for both rip and crosscuts

110853

BGN52.92

Shokunin Kataba Super Hard Saw Blade 🪚 Premium Woodworking Equipment | JetTools.bg

Availability Axminster: Delivery 10-15 working days!

Japanese Saw Blades

Shokunin Kataba Super Hard Saw Blade

Replacement blade for Shokunin Kataba Super Hard SawsImpulse-hardened teeth for precision crosscuttingRustproof nickel plating for enhanced durability0.6mm thick blade with a 1.9mm tooth pitchBackless design for unlimited depth of cutSuitable for softwood, hardwood, and plywood

110854

BGN43.28

Shokunin Retractable Saw blade 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Japanese Saw Blades

Shokunin Retractable Saw blade

Replacement blade for Shokunin Retractable SawsImpulse-hardened teeth for long-lasting sharpnessRustproof nickel plating for enhanced durability80mm blade that fully retracts into the handleHandy pocket-sized saw for trimming or modellingSuitable for wood, plywood, PVC pipe, and bamboo

110855

BGN11.98

Rider Apron Plane Blade for Rider & Axminster Workshop 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Block Plane Blades

Rider Apron Plane Blade for Rider & Axminster Workshop

Designed for use with Rider and Axminster Workshop planes, ensuring a perfect fitImproves the performance of your plane, making woodworking easier and more efficientHigh quality steel ensures durability and a sharp edge for smooth, clean cutsSuitable for both professional woodworkers and DIY enthusiastsProvides consistent and reliable results for all your...

110635

BGN37.14

Axminster Professional Bevel Guide 🪚 Premium Woodworking Equipment | JetTools.bg

Limited Availability: Contact us for delivery times

Sharpening

Axminster Professional Bevel Guide

For the Axminster Professional Honing Guide AssemblyGuarantees accurate and precise micro bevelThe final stage in achieving an ultimate edgeAccepts the tool mounted in the honing guideMicro bevel strengthens the edgeSpeeds up time spent honingExtends the period between re-grinding

109388

BGN147.44

Rider Additional Napped Leather Platten for Rider Pro Strop 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Sharpening

Rider Additional Napped Leather Platten for Rider Pro Strop

Additional Napped Leather plattenFor use with a different polishing compoundExtra large leather surface 295 x 75mm

108129

BGN41.34

Sharpen the inside bevel of hook knivesWorks on knives with 11mm radius or largerUses fine abrasive to achieve razor sharp edgesIncludes 400 & 600 grit abrasive and full instructions

Flexcut Hook Hone 🪚 Premium Woodworking Equipment | JetTools.bg

Out-of-Stock

Sharpening

Flexcut Hook Hone

Flexcut

109352

BGN119.34