Tru-Grind Cubic Boron Nitride(CBN) grinding wheels are a revelation for the sharpening of HSS turning tools. CBN abrasive is a similar product to synthetic industrial diamonds, but a CBN wheel is far better suited for sharpening high speed steels and will withstand the friction from grinding with much less heat produced than with a diamond wheel. They produce hardly any sparks, cut quickly and efficiently and will last for many years. Plus, because it will withstand the friction the wheel doesn't wear and therefore the jig will not need to be reset. No dressing is required and they leave a nice fine and even sharp edge. Two sizes are available, both 180 grit: 150mm x 25mm x 12.7mm bore or 150mm x 40mm x 15mm bore (Creusen) Due to the weight of the wheel, these should be used on grinders with motors of 375W or above.
- Wheel Diameter
- 150 mm
Digital readings with a resolution of 0.1°Displays either absolute or relative anglesBack lit LCD screen with 10mm high figures; easy to readMagnets in base grip onto steel and ferrous surfacesDurable aluminium frame, dust and waterproof to IP54Lightweight and portable; 60 x 60 x 25mm, weight 70gAuto shut-off after 5 minutesPowered by a standard AAA...
EC Class 1 standard for guaranteed accuracyPermanently etched, black filled graduationsMetric graduations millimetres and half millimetresGraduations on both sidesHardened stainless steel for durabilityPearl chrome anti-glare finish
Protection level FFP2A better fitting mask for better protectionInternal structure results in an unrivalled secure fitStructure maximises fit, comfort and performanceTyphoon™ valve reduces breathing resistanceAdjustable straps for a improved fitFoam strip around the inside forms a better sealWelded nosepiece improves the fit around the topCompatible with...
Torx Head Woodscrews
Top quality zinc plated wood screws with a self countersinking headThey have deep sharp threads that cut into the wood, not forcing throughPenetrating tip that requires no pilot hole or pre-drillingHeat treated to ensure they are hard and resistant to snappingFor use in soft or hard wood, MDF or chipboardTorx heads and wax lubricated for the easiest...