Developed for smaller diameter tenon cutting, for use with small stock. They are available in cutting diameters from 5/16" to 9/16". The 9/16" tenon is the size used historically for chair rungs. The 1/2" size is useful in many areas e.g. members within trellis or lattice work. All the sizes have a straight blade that cuts a 60° shoulder tenon (not a radiused shoulder tenon as on the larger sizes). The 5/16" cuts tenons up to 1" long, and the 1/2" and 9/16" cut tenons up to 1.3/8" long. A plug gauge is included for easy blade setting. 3/8" round shank. Patented. (For use in an electric drill, not a drill press).
- Available in diameters from 5/16" to 9/16", latter used for chair rungs
- 1/2" are useful for trellis or lattice work
- All have a straight blade that cuts a 60° shoulder tenon (not a radiused shoulder tenon)
- 5/16" size cuts tenons up to 1" long
- 1/2" and 9/16" sizes cut tenons up to 1.3/8" long
- A plug gauge is included for easy blade setting, 3/8" round shank
- For use in electric drill, not a drill press
Digital readings with a resolution of 0.1° Displays either absolute or relative angles Back lit LCD screen with 10mm high figures; easy to read Magnets in base grip onto steel and ferrous surfaces Durable aluminium frame, dust and waterproof to IP54 Lightweight and portable; 60 x 60 x 25mm, weight 70g Auto shut-off after 5 minutes Powered by a...
EC Class 1 standard for guaranteed accuracyPermanently etched, black filled graduationsMetric graduations millimetres and half millimetresGraduations on both sidesHardened stainless steel for durabilityPearl chrome anti-glare finish
Protection level FFP2A better fitting mask for better protectionInternal structure results in an unrivalled secure fitStructure maximises fit, comfort and performanceTyphoon™ valve reduces breathing resistanceAdjustable straps for a improved fitFoam strip around the inside forms a better sealWelded nosepiece improves the fit around the topCompatible with...
Torx Head Woodscrews
Top quality zinc plated wood screws with a self countersinking headThey have deep sharp threads that cut into the wood, not forcing throughPenetrating tip that requires no pilot hole or pre-drillingHeat treated to ensure they are hard and resistant to snappingFor use in soft or hard wood, MDF or chipboardTorx heads and wax lubricated for the easiest...
75mm longAdjustable depth settingFit all hex shank and quick change systems, including Festool's CentrotecMagnetic ring securely holds the screw on the screwdriver bitSleeve locks for consistent screw depth