The light pull drive is a friction drive with steps 1/8"(3.2mm), 1/4"(6.35mm, 3/8"(9.5mm), 1/2"(12.7mm) and 5/8"(16mm). Simply slip the blank onto the drive, bring up the tailstock until the blank is supported by the revolving centre, and away you go. The drive is designed to allow plenty of room to work around the light pull, including sanding and finishing.
Digital readings with a resolution of 0.1°Displays either absolute or relative anglesBack lit LCD screen with 10mm high figures; easy to readMagnets in base grip onto steel and ferrous surfacesDurable aluminium frame, dust and waterproof to IP54Lightweight and portable; 60 x 60 x 25mm, weight 70gAuto shut-off after 5 minutesPowered by a standard AAA...
Torx Head Woodscrews
Top quality zinc plated wood screws with a self countersinking headThey have deep sharp threads that cut into the wood, not forcing throughPenetrating tip that requires no pilot hole or pre-drillingHeat treated to ensure they are hard and resistant to snappingFor use in soft or hard wood, MDF or chipboardTorx heads and wax lubricated for the easiest...