Let's face it, in a lot of cases a clamp just needs to hold two parts in place whilst the glue dries, you don't always require something capable of crushing a truck. Spring clamps are easy to position with one hand, fast, firm, relatively inexpensive and more than capable of fulfilling numerous clamping needs. These all-steel, plated clamps have vinyl plastic jaw tips to protect your work-piece. The same coating on the handle makes for comfortable use. Use these clamps for holding workpieces whilst glue dries, temporarily securing a moulding as you nail it in place, in small jigs or just as overgrown bulldog clips. Capacities given are for the clamps fully open and the throat depth.
Inflatable shims with dozens of usesFor fitting, fixing or levelling; slimline, slides into a 2mm gapHand operated for controlled inflationHard-wearing, non-marring materialSealed and glued with TPU and high frequency weldingSlim: size 100mm x 140mm, lift 2mm to 45mm
Torx Head Woodscrews
Top quality zinc plated wood screws with a self countersinking headThey have deep sharp threads that cut into the wood, not forcing throughPenetrating tip that requires no pilot hole or pre-drillingHeat treated to ensure they are hard and resistant to snappingFor use in soft or hard wood, MDF or chipboardTorx heads and wax lubricated for the easiest...
75mm longAdjustable depth settingFit all hex shank and quick change systems, including Festool's CentrotecMagnetic ring securely holds the screw on the screwdriver bitSleeve locks for consistent screw depth