A range of Axcaliber quality 2 wing slotting cutters suitable for machining grooves for plywood etc. Available sizes are 2, 3, 4, 5 and 6mm all with an 8mm bore. Cutter diameter of 47.6mm with 22mm bearing gives a 12.7mm groove depth. For biscuit joints use 4mm slot cutter 666277. N.B.Suitable arbors are available in 1/4"(6.35mm) and 1/2"(12.7mm) shank sizes.
- D = Overall Diameter
- 47.5 mm (1.7/8")
Cleaners & Revivers
Dissolves resin, pitch, goo, gunk, crud, gunge and other nasty residuesFormulated to clean saw blades, router cutters etcHelps maintain cutter performanceUse regularly to prolong a tool's working lifeSupplied in a convenient 500ml spray bottle
Torx Head Woodscrews
Top quality zinc plated wood screws with a self countersinking headThey have deep sharp threads that cut into the wood, not forcing throughPenetrating tip that requires no pilot hole or pre-drillingHeat treated to ensure they are hard and resistant to snappingFor use in soft or hard wood, MDF or chipboardTorx heads and wax lubricated for the easiest...
75mm longAdjustable depth settingFit all hex shank and quick change systems, including Festool's CentrotecMagnetic ring securely holds the screw on the screwdriver bitSleeve locks for consistent screw depth
8 other products in the same category:
Grooving & Slotting
Use to cut a T-slot in a workbench or an assembly tableEnables use of guide rail clamps as hold-downsProduce custom-made guide rails in hardwoodCut a T-Slots in nylon for home-madeHigh shear-cut angle for cleaner finishPTFE coating helps minimise resin build-up1/2" shank