Axcaliber Premium 305mm TCT Циркулярен диск
Axcaliber Premium 305mm TCT Циркулярен диск
Axcaliber Premium 305mm TCT Циркулярен диск
Axcaliber Premium 305mm TCT Циркулярен диск
    Axcaliber Premium 305mm TCT Циркулярен диск
    Axcaliber Premium 305mm TCT Циркулярен диск
    Axcaliber Premium 305mm TCT Циркулярен диск
    Axcaliber Premium 305mm TCT Циркулярен диск

    Axcaliber Premium 305mm TCT Циркулярен диск

    • Micro grained TCT tips
    • Resin damped, laser cut plates
    • 12° hook angle
    • 3.2mm kerf
    • 28, 48, 72 & 96T
    • 30mm bore, reducing bushes available
    -bg
    Blade Application
    951524
    Централен склад: Доставка 7-10 раб. дни!
    239,38 лв.

    на 12 вноски по 23.56 лв.

    Вземи желания продукт сега, избери подходяща за теб схема на изплащане:

    Не е нужно да избираш, може да имаш всичко!
    Купи на равни вноски стоки от 100 до 30000 лв., избери най-подходящата за теб вноска.
    С TBI Pay, пазаруването е лесно, гъвкаво и напълно онлайн.
    Контролът е в твоите ръце, не чакай.
    Пазарувай!

    Виж схемите, които предлагаме
    Добави в количката
    Заяви и купи сега
    Откажи

    Описание

    Axcaliber "Premium" circular saw blades are from the world's largest blade manufacturer. Using the latest production techniques and the best materials, the Premium blades feature micro grain TCT tips and resin damped laser cut plates, which substantially reduce noise whilst cutting. The "Premium" range is the blade of choice for all joinery and cabinet workshops demanding the very best performance. The fine crosscut blades feature Alternate Top Bevel (ATB) ground teeth, ensuring a clean, fast cut. The tops of the teeth are bevelled alternately at approximately 15 degrees. This tooth configuration bears a sharp pointed tip that provides a neat clipping action for very fine finishes. Two teeth will span the entire width of the kerf. It produces very low cutting pressures that almost eliminate the tendency to tear out. The chips fall free in the chip spaces created by the large side clearance angles. The rip cut blades feature trapezoidal ground teeth, known as a Top Centre Ground or Triple Chip tooth profile where one flat top tooth is followed by a trapezoidal tooth, which is slightly higher. The higher tooth cuts material narrower than final kerf, helping to eliminate chipping and tear out. This provides the finest finish on all woods or manmade boards including faced boards.-bg

    Подробности за продукта

    Hook Angle
    12°
    Blade Diameter
    305 mm
    Bore Size
    30 mm
    Kerf
    3.2 mm
    Maximum RPM
    6,500 rpm
    Plate Thickness
    2.2 mm
    5052511000500

    Свързани продукти

    Reviews (0)

    No reviews
    Продуктът е добавен в Любими
    Добавени продукти за сравнение.

     Jettools. bg използва бисквитки (cookies). Ползвайки уебсайта, Вие се съгласявате с нашата Политика за кукита. Прочети повече