Списък на продуктите по марка Veritas

Veritas Panel Platform Kit 🪚 Премиум оборудване за дървообработка | JetTools.bg
    Склад Axminster: Ограничена наличност!
    Bench Dogs & Holdfasts-bg

    Veritas Panel Platform Kit

    Veritas
    105157
    81,21 лв.
    Make a platform for cutting sheet materialA must-have when using a handheld circular sawRapidly assembled, portable when not in useRaises material, allowing blade to pass through safelyForms a strong and stable platform for 2,400 x 1,200 (8x4) sheetsIncludes tough nylon bag for transport and storageUse on site or in the workshopKit comprises 12 saddles...
    Veritas Platform Saddles 2" x 4" 🪚 Премиум оборудване за дървообработка | JetTools.bg
      Склад Axminster: Доставка 10-15 раб. дни!
      Bench Dogs & Holdfasts-bg

      Veritas Platform Saddles 2" x 4"

      Veritas
      105159
      39,07 лв.
      Make a sacrificial standoff to protect bench topPrevents power tool blades from contacting surfaceUse when sawing, drilling, jigsawing etcTough reusable polypropylene mouldingsRemovable post fits 3/4" and 20mm dog holesUse on site or in the workshopComprises 4 saddles for prepared 2 x 4 timberTimber not included-bg
      Veritas Mk.II Honing System 🪚 Премиум оборудване за дървообработка | JetTools.bg
        Склад Axminster: Доставка 10-15 раб. дни!
        Honing Guides-bg

        Veritas Mk.II Honing System

        Veritas
        200810
        198,60 лв.
        Increased range, capacity and accuracyIntegral blade registration squares the blade and sets the bevel angle in one easy stepThree bevel-angle range configurationsDesigned to accept flat and tapered blades, as well as blades with irregular geometryThree-position eccentric roller allows a micro-bevel to be honed quickly and accurately50mm wide roller is...
        Veritas Dovetail Saw 🪚 Премиум оборудване за дървообработка | JetTools.bg
          Склад Axminster: Доставка 10-15 раб. дни!
          Dovetail & Gents Saws-bg

          Veritas Dovetail Saw

          Veritas
          210923
          270,24 лв.
          Spine permanently moulded onto the bladeRight amount of weight to carry the saw effortlessly into the cutEnsures control where accuracy is most importantPolished hardwood handle is shaped to fit the hand comfortablyMortice and tenon joint between handle & back for solid and secure fixingJapanese high carbon steel blade, 230mm (9") long by 40mm...
          Veritas Side Rebate Plane 🪚 Премиум оборудване за дървообработка | JetTools.bg
            Склад Axminster: Ограничена наличност!
            Rebate & Shoulder Planes-bg

            Veritas Side Rebate Plane

            Veritas
            211005
            524,88 лв.
            Use for cleaning up, fine fitting or trimming of rebates and groovesDual-blade configurationIngenious pivoting handle for right or left-hand useUse in slots as narrow as 4.8mmToe is removable for use in a stopped dado115mm long, weight 450gDuctile cast iron body with O1 tool steel blades (HRC 58-60)Made in Canada-bg
            Veritas Shelf-Drilling Jig 🪚 Премиум оборудване за дървообработка | JetTools.bg
              Изчерпано
              Водачи и приспособления за пробиване

              Veritas Shelf-Drilling Jig

              Veritas
              474283
              470,10 лв.
              Ensures holes exactly opposite and equally spacedTwin-register pins in the rails fit into holes already drilledRegister pins have tapered tips24" rails each have 20 holes drilled at 1" intervalsBush carrier registers perfectly in hole and is easily movedHoles drilled at 90° as hardened bushings are 13/16" long10 hole sizes can be drilled with the standard...
              Вижте
              Veritas Dowelling Jig 🪚 Премиум оборудване за дървообработка | JetTools.bg
                Склад Axminster: Ограничена наличност!
                Dowel Jigs & Accessories-bg

                Veritas Dowelling Jig

                Veritas
                474668
                328,93 лв.
                For centred dowelling or doweling boards to a reference faceMicrometer clamp head can be set from 6 to 13mm from the centre lineSetting is positive and accurate to a few thousands of an inchMovable clamp heads will grip work as small as 13mm x 35mmChain drill dowel holes using the tapered pin to register off the last hole drilledMovable bushing carrier...
                Veritas Cabinet Scraper 🪚 Премиум оборудване за дървообработка | JetTools.bg
                  Склад Axminster: Ограничена наличност!
                  Cabinet Scrapers-bg

                  Veritas Cabinet Scraper

                  Veritas
                  474843
                  334,65 лв.
                  Smoothes glue lines or surfaces without tear-out, digs or gougesAllows pressure to be applied directly in line with the cutting edge70mm wide blade, with both cutting edges ground at 45°Shaped to protect the upward-facing cutting edgeSole is surface ground for accuracy (80 x 85mm)Made from ductile cast ironOverall length 290mm. Weighs about 740gMade in...
                  Veritas Panel Clamp 🪚 Премиум оборудване за дървообработка | JetTools.bg
                    Склад Axminster: Доставка 10-15 раб. дни!
                    Панелни стяги

                    Veritas Panel Clamp

                    Veritas
                    475209
                    169,70 лв.
                    Eliminates bowed panels by exerting balanced tension on clamp barsThe greater the pressure, the more rigid the bars becomeSerrated posts grip the wooden clamp barsKeeps panels flat under any pressure without allowing bars to liftTightens by hand and the system is stackable for production workClamp from 16 mm to 50 mm thick while keeping clamp pads centred...
                    Veritas Sliding Square 🪚 Премиум оборудване за дървообработка | JetTools.bg
                      Склад Axminster: Доставка 10-15 раб. дни!
                      Layout Tools-bg

                      Veritas Sliding Square

                      Veritas
                      475300
                      122,45 лв.
                      Use to lay out or transfer measurementsSimplifies working in two axesReduces error when marking 2 dimensionsStainless-steel blade is 75mm wide and 150mm longMachine ground on all four edges.Metric graduated to 100mm on sides and end to 70mmBlade cut-out holds pencil for parallel linesHardened steel reference pins set in bodyMade in Canada-bg
                      Показване на 181 - 216 на 295 елемент(и)
                      Филтриране по
                      Категории
                      Цена
                      лв. лв.
                      Filter
                      Product added to compare.
                      Продуктът е добавен в списъка с желания