Setting Gauges-bg

Показани са 1-8 от общо 8 артикул(а)

Дигитален ъгломер UJK...

Аксесоари за банциг

Дигитален ъгломер UJK Technology

Digital readings with a resolution of 0.1° Displays either absolute or relative angles Back lit LCD screen with 10mm high figures; easy to read Magnets in base grip onto steel and ferrous surfaces Durable aluminium frame, dust and waterproof to IP54 Lightweight and portable; 60 x 60 x 25mm, weight 70g Auto shut-off after 5 minutes Powered by a...

View

Veritas Poly Gauge

Setting Gauges-bg

Veritas Poly Gauge

Quick and accurate setting of saw blades, mitre and planer fencesPre-determined angles are 45°, 54°, 60°, 67.5° and 75°Can be used horizontally or verticallyOverall size 215 x 150mm-bg

View

Veritas 9 Piece Set-Up...

Setting Gauges-bg

Veritas 9 Piece Set-Up Blocks (Metric)

An ideal way to accurately and quickly set fences, gauges etc9 pieces combine to cover the range 0.5mm to 123mm in 0.5mm steps3 vinyl shims, 5 aluminium blocks and one steel blockShims and aluminium blocks accurate to within 0.05mmSteel block is accurate to 0.018mmSupplied in plastic case with dividers to protect the piecesMade in Canada-bg

View

UJK Technology Depth Gauge...

Router Table Fences & Accessories-bg

UJK Technology Depth Gauge and Level Box

Strong and stable cast iron body, stands upright unaidedIndispensable for precise setting of cutting depthsAccurate measurement of router cutter depth and saw blade heightInternal width of 54mm, adjustable height range up to 80mmResolution 0.01mm or 0.001"Simple to operate, easy to readLCD readout displays in mm and inchesZero at any point for relative...

View

UJK Technology Circular Saw...

Инструменти за настройка

UJK Technology Circular Saw Aligning Jig

A simple tool to set up table saws, you can use it to measure the following:Align the blade to the mitre slotsAlign the fence to the mitre slot, either parallel or with a measured amount of run-out at the endCheck the axial run-out of the blade (the side to side wobble you see if the blade is turned slowly)Check the axial run out of the blade flangeCheck...

View

Bridge City KM-2 Kerfmaker

Setting Gauges-bg

Bridge City KM-2 Kerfmaker

Maximum groove width 100mmFoolproof, for setting width of grooves or dadoesUnique tool works with kerfs up to 25mm wideUse with table saws, bandsaws, mitre saws or router tablesMake precisely fitting lap and other joints in stock up to 100mm3 easy steps for a perfect fit - guaranteedPrecision machined from anodised aluminium-bg

View

Bridge City KM-1 Kerfmaker

Setting Gauges-bg

Bridge City KM-1 Kerfmaker

Foolproof; for setting width of grooves or dadoesWorks with table saws, bandsaws, mitre saws or router tablesExact width grooves for sheet material, drawer making, lap joints etc.Three easy steps for a perfect fit; guaranteedPrecision machined from anodized aluminiumMax groove width 50mm-bg

View

Axminster 47 Piece Gauge...

Gauge Blocks-bg

Axminster 47 Piece Gauge Block Set

Opposing faces dead flat and finely polished21pcs - 1mm to 1.19mm x .01mm, (plus 1.005mm)8pcs - 1.2mm to 1.9mm x .1mm8pcs - 2mm to 9mm x 1mm10pcs - 10mm to 100mm x 10mmSupplied in a polished, fitted wooden caseSupplied with an inspection certificate of accuracy-bg

View

Продуктът е добавен в Любими

Добавени продукти за сравнение.

Jettools. bg използва бисквитки (cookies). Ползвайки уебсайта, Вие се съгласявате с нашата Политика за кукита. Прочети повече