For turners: open the calliper by just pulling the legs apartSpacing nut between the legs rather than outside facilitatesPosition and then set the spacing nut to the wall thicknessOpen callipers, remove and measure tip gapSpacing nut adjustable for any thicknessFrom 0 to 343mm on 420mm model and 0 to 140mm on 230mm modelRespective throat depths: 295mm and...
Online exclusiveCan be used for drawing circles, arcs or used as dividers to measure distancesManufactured from forged steelHardened & ground compass point and knurled grip locking screwsSize: 200mm (8")-bg
Pocket-sizedMovable head locks for comparative measurementEasy-to-read non-reflective 100mm scale calibrated to 0.05mm resolutionExternal, internal, depth and distance from an edge measurementSupplied with leatherette case-bg
Stainless steel with satin finishClear metric and imperial graduationsMetric scale gives readings down to 0.02mm and the imperial scale 0.001"Can be used for external, internal and depth measurement-bg
Easy-to-read dial calipersHardened stainless steel with ground and lapped measuring faces150mm maximum measuring length calibrated in 0.02mm divisionsKnurled wheel for adjustmentSupplied in a strong foam lined presentation case-bg
Use to scale up or down with high accuracyTransfer ratios from 1:1 to 1:10Divide the circumference into equal segments, from 6 to 15Golden Section the ratio of 1:1.618Square Root 2, gives 1:1.414An invaluable tool for transferring scalePassivated-chrome finish with stainless steel pointsOverall length 185mm-bg