Други ръчни инструменти

Wiha T-Handle Nut Drivers Wiha T-Handle Nut Drivers 2
Наличност
Nut Spinners-bg

Wiha T-Handle Nut Drivers

Wiha
ax19908
16,00 лв.
Provides high torque transmission from hand to nut or boltParticularly useful when removing difficult boltsHandle moulded directly onto bladeAccurate hex recesses with deep hollowAvailable in a range of sizesHard chromed, 125mm long blades-bg
BOA Wrenches
Наличност
Chuck Accessories-bg

BOA Wrenches

Boa
ax22720
8,00 лв.
Rubber strap will not mark or scratch surfaceBaby Boa - 150mm(6") handle, grips up to 100mm(4") diameterStandard Boa - 200mm(8") long, grips up to 150mm(6") diameterUseful on a huge variety of jobs around the home-bg
Bosch GCM 12 GDL 305mm... Bosch GCM 12 GDL 305mm... 2
Наличност
Герунг циркуляри

Bosch GCM 12 GDL 305mm Axial-Glide Mitre Saw

Bosch
ax868064
2 250,00 лв.
Unique saw with large capacity and Axial-Glide system104mm maximum cut height, 341mm width at 90°Axial-Glide system gives the smoothest possible saw action52° left and 60° right mitre cuttingMaintenance-free with sealed bearingIntegrated sliding work supports, left and rightAll controls to the front of the machineDual laser-line, precision 'Freud' saw...
Bosch GCM 12 GDL... Bosch GCM 12 GDL... 2
Наличност
Герунг циркуляри

Bosch GCM 12 GDL Axial-Glide Mitre Saw and GTA 2500 W Legstand - PACKAGE DEAL

Bosch
ax872717
2 850,00 лв.
Unique saw with large capacity and Axial-Glide system104mm maximum cut height, 341mm width at 90°Axial-Glide system gives the smoothest possible saw action52° left and 60° right mitre cuttingMaintenance-free with sealed bearingIntegrated sliding work supports, left and rightAll controls to the front of the machineDual laser-line, precision 'Freud' saw...
FISCH Standard Engineer's... FISCH Standard Engineer's... 2
Наличност
Countersinks-bg

FISCH Standard Engineer's Countersinks

Fisch
ax890789
25,00 лв.
Available in four sizesM2 tool steel90° included angleFor use with wood and metalMade in Austria-bg
FISCH HSS Colbalt Countersink FISCH HSS Colbalt Countersink 2
Наличност
Countersinks-bg

FISCH HSS Colbalt Countersink

Fisch
ax890817
26,00 лв.
Quality cobalt countersink bitChatter and burr free finishSuitable for nearly all materialsAvailable in three sizes 10-4mm, 12-4mm and 16-5mmMade in Austria-bg
Bosch GCM 8 SJL 216mm Slide... Bosch GCM 8 SJL 216mm Slide... 2
Наличност
Герунг циркуляри

Bosch GCM 8 SJL 216mm Slide Mitre Saw

Bosch
ax923086
807,00 лв.
Large cutting capacity with precision laser (70 x 312mm at 0°)Rebate and groove depth stopMitre set from front scale, quick set indents, adjustable and front lockingBevel set and locked via side lock lever, common angle turret stopBraked soft start motorTwo point dust extraction outlet for the best extractionIntegrated side fences that pull out to aid...
Bosch GCM 8 SJL 216mm Slide... Bosch GCM 8 SJL 216mm Slide... 2
Наличност
Герунг циркуляри

Bosch GCM 8 SJL 216mm Slide Mitre Saw and GTA 2600 Stand - PACKAGE

Bosch
ax923098
1 050,00 лв.
Large cutting capacity with precision laser (70 x 312mm at 90°)Simple, quick and exact set-upCrosscut, mitre/bevel or compound cuttingRebate and groove depth stopMitre set from front scale, quick set indents, adjustable and front lockingBevel set and locked via side lock lever, common angle turret stopBraked 1,600W soft start motor, two-point dust...
FISCH Quick Change System... FISCH Quick Change System... 2
Наличност
Countersinks-bg

FISCH Quick Change System Metal HSS Chatter Free Countersink

Fisch
ax947361
52,00 лв.
Fits any quick change system including Festool's CentrotecCan be used on a wide range of materialsChatter and burr freeAvailable in 5-13mm and 7-20mmFits all hex shank and quick change systemsMade in Austria-bg
Bosch GCM 12 SDE Dual Bevel... Bosch GCM 12 SDE Dual Bevel... 2
Наличност
Герунг циркуляри

Bosch GCM 12 SDE Dual Bevel Mitre Saw

Bosch
ax960647
1 620,00 лв.
Massive cutting capacity of 120mm x 400mmVariable speed for cutting a wide variety of materials (110V is single speed)SDS nut for tool free saw blade changesBevel cutting up to 47° on both sidesLaser line projects cut line across the workpiecePull out table extensions on both sides for extra support3 year warranty available (registration required)-bg
Bosch GCM 12 SDE Mitre Saw... Bosch GCM 12 SDE Mitre Saw... 2
Наличност
Герунг циркуляри

Bosch GCM 12 SDE Mitre Saw & GTA2600 Stand - PACKAGE DEAL

Bosch
ax961088
1 860,00 лв.
Massive cutting capacity of 120mm x 400mmVariable speed for cutting a wide variety of materialsSDS nut for tool free saw blade changesBevel cutting up to 47° on both sidesLaser line projects cut line across the workpiece3 year warranty available (registration required)Fully adjustable work supports for supporting timberEasily folds for transport and...
Bosch GCM 350-254 Slide... Bosch GCM 350-254 Slide... 2
Наличност
Герунг циркуляри

Bosch GCM 350-254 Slide Mitre Saw 254mm

Bosch
ax981246
1 305,00 лв.
Large cutting capacity, up to 100mm vertical and 350mm horizontalMitre angles 52° L and 60° R, bevel angle up to 47° L and RIndents for common angles for quick setup and accurate repeat cutsDual-line laser for safer, speedier alignment with cutting lineVariable speed (230V only) allows use on wider variety of materialsEffective extraction with power tool...
Bosch GCM350-254 Slide... Bosch GCM350-254 Slide... 2
Наличност
Герунг циркуляри

Bosch GCM350-254 Slide Mitre Saw & GTA2600 Stand

Bosch
ax984098
1 545,00 лв.
Large cutting capacity, up to 100mm vertical and 350mm horizontalMitre angles 52° L and 60° R, bevel angle up to 47° L and RIndents for common angles for quick setup and accurate repeat cutsDual-line laser for safer, speedier alignment with cutting lineVariable speed allows use on wider variety of materialsEffective extraction with power tool...
Bosch GCM 8 SJL 216mm Slide... Bosch GCM 8 SJL 216mm Slide... 2
Наличност
Герунг циркуляри

Bosch GCM 8 SJL 216mm Slide Mitre Saw & Stand

Bosch
ax984901
1 095,00 лв.
Large cutting capacity with precision laser (70 x 312mm)Rebate and groove depth stopMitre set from front scale, quick set indents and front lockingBevel set and locked via side lock lever, common angle turret stopBraked 1,600W soft start motor2-point dust extraction outlet for greater efficiencyTop carry handle for easy transportSupplied with 48T TCT...
Axminster 47 Piece Gauge...
Наличност
Gauge Blocks-bg

Axminster 47 Piece Gauge Block Set

Axminster
100249
424,00 лв.
Opposing faces dead flat and finely polished21pcs - 1mm to 1.19mm x .01mm, (plus 1.005mm)8pcs - 1.2mm to 1.9mm x .1mm8pcs - 2mm to 9mm x 1mm10pcs - 10mm to 100mm x 10mmSupplied in a polished, fitted wooden caseSupplied with an inspection certificate of accuracy-bg
Multi-Sharp Rotary Mower...
Наличност
Gardening Tool Accessories-bg

Multi-Sharp Rotary Mower Sharpener

Multi-Sharp
100389
17,00 лв.
Online exclusiveResharpens rotary mower blades to the correct angle in minutesSharp blades give a clean cut and are healthier for the grassNo need to remove blade from the mowerReversible, aluminium oxide grinding wheelAlso re-edges and resharpens hoes,lawn-edgers,spades,axesFits any power drill-bg
Bosch GCM 8 SDE 216mm... Bosch GCM 8 SDE 216mm... 2
Наличност
Герунг циркуляри

Bosch GCM 8 SDE 216mm Double Bevel Mitre Saw

Bosch
103342
1 062,00 лв.
Variable speed for cutting wide variety of materials2 points for efficient dust extractionLaser projects cutting lineLarge crosscut capacity 70 x 312mmIndents at common angles for ease of settingMitre angles up to 52° (left) and 60° (right)Bevel cuts up to 47° left or right230V, power output: 1600W3 year warranty available (registration required)-bg
Stanley Dynagrip 3 Piece...
Наличност
Nail Punches-bg

Stanley Dynagrip 3 Piece Nail Punch Set

Stanley
135884
45,00 лв.
Comfortable Dynagrip sleeve surrounds a fully hardened bodyPrecision milled for extra long life25% longer than conventional nail punchesColour coded sleeves for easier identification of sizesOverall Length: 125 mm-bg
Axminster AP0 Arbor Press
Наличност
Pen & Pencil Kit Accessories-bg

Axminster AP0 Arbor Press

Axminster
340041
101,00 лв.
Hand operatedUseful for assembling brass tubes into wooden pen blanksApplies firm and uniform pressure114mm travel19mm square arbor-bg
Veritas Metal Bender
Наличност
Менгемета за бормашини и фрези

Veritas Metal Bender

Veritas
476080
44,00 лв.
Allows you to form a metal part with controlMade of high-strength malleable cast ironCapable of bending up to 3.2mm(1/8") mild steelClamps against a vice jaw using embedded rare earth magnetsMake bends up to 90° for angle brackets and sheetmetal partsA versatile and inexpensive tool for any workshop-bg
FISCH Quick Change System... FISCH Quick Change System... 2
Наличност
Countersinks-bg

FISCH Quick Change System Metal HSS Countersink

Fisch
507213
33,00 лв.
Fits any quick change system including Festool's CentrotecCan be used on a wide range of materialsThree sharp edges keeping the working temperature lowSize 5-16mmFits all hex shank and quick change systemsMade in Austria-bg
Zeus Reference Book
Наличност
Thread Cutting-bg

Zeus Reference Book

Zeus Precision Charts Ltd
662422
22,00 лв.
Metric/Imperial conversion tablesThread informationTapping drill requirements-bg
FISCH Quick Change 2 Piece...
Наличност
Countersinks-bg

FISCH Quick Change 2 Piece Countersink Set

Fisch
717876
78,00 лв.
Can be used on a wide range of materialsThree flute for use on metalsSnail countersink, best for woodFits all hex shank and quick change systems, including Festool's CentrotecMade in Austria-bg
Продуктът е добавен в Любими
Добавени продукти за сравнение.

 Jettools. bg използва бисквитки (cookies). Ползвайки уебсайта, Вие се съгласявате с нашата Политика за кукита. Прочети повече