Axminster Hobby Series HBS250N Bandsaw

762,00 лв.
  • Compact, hobby rated machine of steel and cast iron construction
  • Rigid body construction allows high blade tension for increased accuracy
  • Upper and lower ball bearing blade guides, gives better blade control
  • Large, rigid, quick locking rip fence, doors fitted with safety switches
  • Useful depth of cut - 120mm with 245mm width of cut
  • Supplied with cabinet stand and mitre fence with T-slot for accuracy
  • Also comes with 1,790mm x 3/8" x 6tpi, UK made Axcaliber blade
Кредитен модул TBI Bank 19.68

Само за 74.97 лв. на месец


The Axminster Hobby HBS250N bandsaw is a smaller floor standing model with a storage cabinet, rip fence and alloy mitre fence. The extruded aluminium rip fence is cam locked and supported at the rear by a ball bearing with rails allowing the full cutting width up to the frame. The machine is fabricated from sheet steel with a very rigid tapered back column, as well as a cast iron table and balanced cast alloy wheels; these features are usually only found on much bigger machines. The stiffness of the steel fabrication allows the blade tension to be much higher than most bandsaws of this size helping to reduce the blade vibration and increase accuracy. The blade is well supported with ball bearing guides both above and below the table. Unusually in a bandsaw of this size, the back edge of the blade runs on the face of the rear thrust bearings rather than the side. Both doors are fitted with safety micro switches meaning that the motor will cut out should a door be opened while the machine is in use. As an entry level bandsaw, the HBS 250N is difficult to fault; compact in size yet with surprising capabilities . The bandsaw is supplied with mitre fence, storage cabinet stand and a UK made Axcaliber blade, 1,790mm x 3/8" x 6tpi.-bg

Подробности за продукта

Dust Extraction Outlet
63 mm
Max Cutting Height
120 mm
230 V
Min Extraction Airflow Required
390 m³/hr
Table Tilt
5° - 0° - 45°
Nett Weight
43.5 kg
Bandsaw Wheel Diameter
250 mm
370 W
Blade Width Min\Max
6 mm to 13 mm
Table Size
340 mm x 340 mm
Max Width of Cut with Fence
220 mm
Table Height on Stand
990 mm
Max Width of Cut
245 mm
Bandsaw Blade Length
1,790 mm (70.1/2")
Overall L x W x H
420 mm x 410 mm x 1,500 mm
Blade Speed
660 & 960 m/min

Прикачени файлове


No reviews
Продуктът е добавен в Любими
Добавени продукти за сравнение.

 Jettools. bg използва бисквитки (cookies). Ползвайки уебсайта, Вие се съгласявате с нашата Политика за кукита. Прочети повече