Axminster Trade AT700PD/ATDP17F...
Axminster Trade AT700PD/ATDP17F...
Axminster Trade AT700PD/ATDP17F...
Axminster Trade AT700PD/ATDP17F...
Axminster Trade AT700PD/ATDP17F...
Axminster Trade AT700PD/ATDP17F...
Axminster Trade AT700PD/ATDP17F...

Axminster Trade AT700PD/ATDP17F Колонна бормашина

  • Medium sized, floor standing pillar drill for trade use, all cast iron construction
  • Smooth running 750W induction motor, 12 belt speeds 120-2,580rpm
  • Spindle running in genuine NSK ball bearings
  • Quill assembly is a good fit into the headstock
  • Convenient rack and pinion table height adjustment
  • Fitted with cast iron feed handle with soft rubber grips and a quality 1-16mm keyless chuck
  • Electrically interlocked chuck guard and LED work lamp included
  • Features include belt cover safety switch and separate emergency stop switch
Кредитен модул TBI Bank 19.68

Само за 150.49 лв. на месец


This is a medium sized, floor standing Trade pillar drill. Very robustly made from cast iron and machined steel giving high strength and stability. It has a highly accurate chuck spindle assembly, running in NSK ball race bearings. The quill housing is a good fit within the headstock casting, giving consistent drilling. Powered by a smooth running 750W induction motor, there are 12 belt speeds between 120-2,580rpm. The Japanese made belts are of the multi-vee type, chosen for maximum grip and the lowest level of vibration. The belt cover also has a safety switch to prevent the drill being run with the cover open. The down feed is via a one-piece cast iron handle with soft rubber grips and there is an accurate drilling depth control. A quality 1-16mm keyless chuck is fitted. The chuck guard is electrically interlocked for safety and is easily adjustable for height. The switch system has a separate locking emergency stop switch, plus there is a switch for the integrated LED work light. Table height is controlled via a rack and pinion system; the whole table assembly can be swivelled away to allow the base to be used as a work support. This trade rated pillar drill offers many unique features but is quite compact in size. If you are looking for a bench mounted model of similar size, please refer to product code 102553. A great choice for any trade or school workshop looking for a great performing floor standing pillar drill. Please note, this machine must be bolted to the floor for safe working.-bg

Подробности за продукта

Max Drilling Mild Steel
25 mm
Chuck Type
Размери L x W x H
750 mm x 430 mm x 1,650 mm
Table Tilt
45° - 0° - 45°
Base Size
520 mm x 320 mm
Plug Fitted
UK 3 pin plug
Diameter of Column
80 mm
230 V
Max Chuck to Table
700 mm
Chuck Capacity
1 mm to 16 mm
108 kg
Speed Range
120 - 2,580 rpm (12)
Morse Taper
2 MT
750 W
Throat Depth
216 mm
Chuck Travel
80 mm
Table Size
345 mm x 345 mm
Max Chuck to Base
1,150 mm
Spindle Taper
2 MT

Прикачени файлове


No reviews
Продуктът е добавен в Любими
Добавени продукти за сравнение.

Уважаеми клиенти, 

Поради независещи от нас причини, поръчките с доставка от централен склад в Англия закъсняват с 5-9 работни дни.

С цел ускоряване на обработката и изпращането на поръчките "Джет БГ" ще приема само поръчки направени  онлайн, по телефон или имейл.

Поръчки с доставка от централен склад в Аксминстър се ще обработват всеки вторник до 13:00ч.

Срокът за доставка е 10-20 работни дни!

Доставките ще се извършват до офис на Еконт или до адрес с 15% отстъпка от цената на куриерската услуга. 

Доставката на тежки машини ще се извършва както до момента с авансово плащане по банков път  и безплатна доставка до адрес! 

Извиняваме се за причиненото неудобство!

 Jettools. bg използва бисквитки (cookies). Ползвайки уебсайта, Вие се съгласявате с нашата Политика за кукита. Прочети повече