Socket chisels are not as common as they used to be, mainly because they are more expensive to make than the common tanged chisel of today. On the plus side they are far stronger, and the handles less likely to break than those fitted to tanged chisels, and the handles can easily be replaced. At 230mm long, these chisels from Lie-Nielsen are particularly comfortable in the hand and have excellent balance. The blades are made of A-2 Tool Steel, hardened to Rockwell 60-62, cryogenically treated and double tempered. The edges are square, parallel along the length, and very narrow so you can get into tight places. The backs are ground flat and finished by hand. The bevel is flat ground at 30°, little additional honing is required. Lie-Nielsen Chisels have Maine-harvested Hornbeam handles, not surprisingly known locally as Ironwood, and prized for its toughness. This under-utilized species makes superb chisel handles.-bg
Подробности за продукта
- Overall Length
- 230 mm
- Chisel Blade Length
- 85 mm
Protection level FFP2A better fitting mask for better protectionInternal structure results in an unrivalled secure fitStructure maximises fit, comfort and performanceTyphoon™ valve reduces breathing resistanceAdjustable straps for a improved fitFoam strip around the inside forms a better sealWelded nosepiece improves the fit around the topCompatible with...
Torx Head Woodscrews-bg
Top quality zinc plated wood screws with a self countersinking headThey have deep sharp threads that cut into the wood, not forcing throughPenetrating tip that requires no pilot hole or pre-drillingHeat treated to ensure they are hard and resistant to snappingFor use in soft or hard wood, MDF or chipboardTorx heads and wax lubricated for the easiest...