So named because of their very low profile, they project only 6mm, above your bench top. A thumb-operated eccentric cam lever controls the sliding jaw, allowing you to secure work quickly. The jaw has a 6mm range of travel and applying up to 130kg of force. Flats on the cam provide secure stops at 3mm and 6mm of travel. The jaw face has a 5° inward cant to help hold a work piece securely. The cam and jaw are cast steel, heat-treated for surface hardness. The standard post version is for use in a 19mm (3/4") diameter through-hole (or blind holes at least 47mm deep). The wedge-lock version is usable at any angle from horizontal to vertical. It will anchor firmly in a 19mm (3/4") diameter through-hole in material as thin as 16mm or in blind holes that are a minimum of 34mm deep. Made in Canada
- Only 6mm tall for better access to your work
- Thumb-operated eccentric cam lever applies up to 130kg force
- Jaw face has a 5° inward cant to hold work securely
- Cam and jaw are cast steel, heat-treated for surface hardness
- Both fit in a 19mm (3/4") diameter through-hole
- Wedge-lock version is usable at any angle from horizontal to vertical
- Made in Canada
Digital readings with a resolution of 0.1°Displays either absolute or relative anglesBack lit LCD screen with 10mm high figures; easy to readMagnets in base grip onto steel and ferrous surfacesDurable aluminium frame, dust and waterproof to IP54Lightweight and portable; 60 x 60 x 25mm, weight 70gAuto shut-off after 5 minutesPowered by a standard AAA...
EC Class 1 standard for guaranteed accuracyPermanently etched, black filled graduationsMetric graduations millimetres and half millimetresGraduations on both sidesHardened stainless steel for durabilityPearl chrome anti-glare finish
Hex Bit Sets
Universal shank magnetic bit holderUniversal shank locking bit holderLong-life TiN coated 25mm bitsPozi (Red) PZ1 x 3, PZ2 x 2Phillips (Blue) PH1 x 2 and PH2 x 3Torx (Yellow) T10 x 2, T15 x 3, T20 x 2, T25 x 2, T30 x 2Slotted (Green) 4mm x 3, 6.5mm x 2Universal shanks fit all quick change systems including Festool CENTROTECSteel storage box
Torx Head Woodscrews
Top quality zinc plated wood screws with a self countersinking headThey have deep sharp threads that cut into the wood, not forcing throughPenetrating tip that requires no pilot hole or pre-drillingHeat treated to ensure they are hard and resistant to snappingFor use in soft or hard wood, MDF or chipboardTorx heads and wax lubricated for the easiest...
75mm longAdjustable depth settingFit all hex shank and quick change systems, including Festool's CentrotecMagnetic ring securely holds the screw on the screwdriver bitSleeve locks for consistent screw depth