Jig Making

UJK Technology T-Nuts M6...
Available
Jig Making

UJK Technology T-Nuts M6 (Pkt 10)

UJK Technology
103413
BGN4.00
M6 pronged T-nuts, easy fix for jig makingSimple and effective fasteningsIdeal for making accurate routing or drilling jigsThread length 15mm for secure holding powerInstalls in 8mm holeZinc plated against corrosionSupplied in packs of 10
UJK Technology Self... UJK Technology Self... 2
Available
Holders & Hooks

UJK Technology Self Adhesive Magnetic Tape

UJK Technology
ax1010690
BGN5.00
Strong magnetic self adhesive tapeMake temporary and reusable clamp padsIdeal for attaching removable sub fencesMany uses when making custom jigsGrips onto steel or ferrous surfaceEasily snipped to lengthSupplied in 1m lengths, 25.4mm or 50mm wideSteel tape available for non-ferrous surfaces
Threaded Pronged 'T' Nuts Threaded Pronged 'T' Nuts 2
Available
Jig Making

Threaded Pronged 'T' Nuts

Axminster
ax828747
BGN6.00
Simple but useful itemsPacks of 10For making accurate & useful jigs or for use about the workshopDrill hole to size, 8mm for the M6, 10mm for the M8 & 12mm for the M10, then gently tap home
Threaded Metal Inserts for... Threaded Metal Inserts for... 2
Available
Jig Making

Threaded Metal Inserts for Wood

Axminster
ax828746
BGN7.00
Excellent aid for jig makingSupplied in packs of 10For making accurate & useful jigs for routing or sawing operations8mm hole size required for the M6 & 10mm for the M8M8 insert taps into placeM6 version threads in by using a hex key
UJK Technology Steel Tape... UJK Technology Steel Tape... 2
Available
Holders & Hooks

UJK Technology Steel Tape 25.4mm x 1m

UJK Technology
105923
BGN8.00
For use with magnetic tapeAllows temporary joining of two non-ferrous itemsIdeal for attaching removable sub fencesSelf adhesive steel tape, easy fixThin, easily snipped to lengthMany uses when making custom jigsSupplied in 1m lengths, 25.4mm wide
UJK Technology T-Slot Bolts... UJK Technology T-Slot Bolts... 2
Available
Jig Making

UJK Technology T-Slot Bolts (Pkt 10)

UJK Technology
ax977684
BGN8.00
All-metric M6 or M8 threaded T-slot bolts18 x 12mm head, direct fit into UJK T-TracksFits into other similar sized 1/2" T-tracksZinc platedAvailable in 3 lengths: 25mm, 50mm and 75mmSupplied in packs of 10
UJK Technology Wedges (Pkt 2) UJK Technology Wedges (Pkt 2) 2
Available
Bench Dogs & Holdfasts

UJK Technology Wedges (Pkt 2)

UJK Technology
105364
BGN13.00
Useful in many workholding situationsSelf-locking, gentle tap to release200mm long, taper from 32mm to 27mmCNC cut from 20mm thick HDF ValchromatApplied force is at 90° to the edge of the workpiece
UJK Technology Backstop UJK Technology Backstop 2
Available
Bench Dogs & Holdfasts

UJK Technology Backstop

UJK Technology
105367
BGN13.00
Use on any multifunction table with 20mm holes at 96mm centresCNC machined from durable, HDF ValchromatUseful stop or assembly aid200mm long x 30mm wide x 20mm thick3 dog holes allow straight or diagonal placement
UJK Technology Fixing Kit...
Available
Jig Making

UJK Technology Fixing Kit For Routers & Jigs

UJK Technology
508626
BGN13.00
4 x M4 x 10mm pan head4 x M4 x 12mm pan head4 x M5 x 16mm pan head2 x M5 x 20mm pan head2 x M6 x 12mm pan head3 x M6 x 16mm pan head3 x M6 x 30mm pan head3 x No. 10 UNFx1/2" pan head2 x 2BAx1/4" Countersunk3 x M6 Washer2 x M5 Nut3 x M6 Nut
UJK Technology Double-Sided...
Available
Jig Making

UJK Technology Double-Sided Tape

UJK Technology
102795
BGN14.00
Bonds to most materials even rough surfacesVery high initial tack, high initial bond and a high shear resistanceHand-tearable with paper carrier, easy to use19mm wide x 50m long
UJK Technology Surface Cam... UJK Technology Surface Cam... 2
Available
Jig Making

UJK Technology Surface Cam Duck Clamps

UJK Technology
102981
BGN20.00
Screw it down, pull it round and lock it offFor secure clamping on bench tops, work boards or self-made jigsFast, easy to fix, don’t rely on bench dog holesCNC machined resin laminateLow profile, only 12 mm thickVersatile, long lasting, re-useableUse for planing, carving, drilling, sanding etcSold as a pack of two
Axminster Anti-Slip Mat
Available
Jig Making

Axminster Anti-Slip Mat

Axminster
340208
BGN21.00
For free hand routing or orbital sandingNon-slip material makes clamps unnecessaryOpen weave prevents waste build-up
UJK Technology Surface Cam... UJK Technology Surface Cam... 2
Available
Bench Dogs & Holdfasts

UJK Technology Surface Cam Clamps (Pair)

UJK Technology
105325
BGN23.00
For secure side pressure clampingDesigned for use on multifunction bench20mm offset dog hole creates cam actionCNC machined phenolic resin laminateLow profile, only 12mm thickUse for planing, carving, drilling, sanding etcSold as a pack of 2
UJK Technology Dovetailed... UJK Technology Dovetailed... 2
Available
Jig Making

UJK Technology Dovetailed T-Track

UJK Technology
502712
BGN47.00
UJK Technology Dovetailed T-TrackMade of aluminiumExcellent accessory for jig makingAvailable in 915mm(36") lengths14° dovetail cutter required
UJK Technology Mitre Slot Bar
Available
Jig Making

UJK Technology Mitre Slot Bar

UJK Technology
502714
BGN48.00
UJK Technology Mitre Slot BarPrecision Bar for mounting jigs and accessoriesSize: 457 x 19 x 9.5Adjustable fit for your mitre slotM6 x 1.0 or M6 x 1.0 Metric threaded holes for attaching jigs and accessories
UJK Technology Mitre Slot... UJK Technology Mitre Slot... 2
Available
Jig Making

UJK Technology Mitre Slot Track

UJK Technology
103565
BGN55.00
Anodised aluminium mitre slot track for durabilityAdd a mitre facility to custom router table etc.Standard 19 x 9.5mm width of slotAccepts standard mitre gauge with or without 'T'Supplied in 915mm (36") lengths easily cut to sizeRequires a groove 31mm wide x 13mm deepPre-drilled with countersunk screw holes
UJK Technology Mitre Fence... UJK Technology Mitre Fence... 2
Available
Jig Making

UJK Technology Mitre Fence & Tee Slot Track

UJK Technology
ax963944
BGN61.00
Aluminium extrusion combines two tracks into oneTakes a mitre gauge with a 3/4" x 3/8" bar without a T-slot washerT-track slot works with standard 1/4" hex head bolts and T-nutsAnodised for wear resistance and lower frictionOffers great potential when building a router tableSee User Manual Download for dimensioned drawing
UJK Technology Cam & Wedge... UJK Technology Cam & Wedge... 2
Available
Bench Dogs & Holdfasts

UJK Technology Cam & Wedge Clamping Set

UJK Technology
105369
BGN65.00
Truly useful accessory for a multifunction tableHolds workpieces without any surface obstructionUseful for sanding, routing, carving etcSet includes 3 stainless steel 12mm Guide PupsPhenolic resin Surface Cam ClampHDF Valchromat, wedges, backstop and spacer
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text