Bandsaw Accessories

Axminster Push Stick
Available
Push Sticks & Pads

Axminster Push Stick

Axminster
100237
BGN9.00
Made from solid plastic, with a convenient hangerSuitable for use on any machine with an exposed cutting blade
Axcaliber Blade & Bit...
Available
Cleaners & Revivers

Axcaliber Blade & Bit Cleaner - 500ml

Axcaliber
104736
BGN37.00
Formulated to clean saw blades, router cutters etcHelps maintain cutter performanceEffective in 60 secondsDissolves resin, pitch, goo, gunk, crud, gunge and other nasty residuesUse regularly to prolong a tool's working lifeSupplied in a convenient 500ml spray bottleGive your TCT some TLC
Bow GuidePRO Bandsaw Feed... Bow GuidePRO Bandsaw Feed... 2
Available
Bandsaw Accessories

Bow GuidePRO Bandsaw Feed Guide Extension

Bow Products
105277
BGN43.00
For workpieces up to 250mm tallAttaches to standard GuidePROConstant, even pressure for tall workpieces100mm tall moulding with 250mm silicone rubber feather
Axminster Craft Mitre Fence
Available
Bandsaw Accessories

Axminster Craft Mitre Fence

Axminster Craft
102919
BGN45.00
Fits the Axminster Craft AC1400B BandsawMakes cutting mitre angles simple and easyMade in cast alloy, with clear markings and a grip handleFits accurately into the table T-slot
UJK Technology Level Box UJK Technology Level Box 2
Available
Setting Gauges

UJK Technology Level Box

UJK Technology
103863
BGN49.00
Digital readings with a resolution of 0.1°Displays either absolute or relative anglesBack lit LCD screen with 10mm high figures; easy to readMagnets in base grip onto steel and ferrous surfacesDurable aluminium frame, dust and waterproof to IP54Lightweight and portable; 60 x 60 x 25mm, weight 70gAuto shut-off after 5 minutesPowered by a standard AAA...
Short Bar For UJK... Short Bar For UJK... 2
Available
Bandsaw Accessories

Short Bar For UJK Technology Mitre Slot Track

UJK Technology
101586
BGN52.00
3/4" wide x 3/8" thick (19 x 9.5mm) x 320mm long barIdeal for jig and fence makingGrub screws can lock your jig or fence firmly in positionFits the UJK Technology Mitre Slot TrackOffers two options: sliding fence or fixed angle fence
UJK Technology Bandsaw Buddy UJK Technology Bandsaw Buddy 2
Available
Bandsaw Accessories

UJK Technology Bandsaw Buddy

UJK Technology
101807
BGN52.00
Designed and made in AxminsterUnique bandsaw blade aligning toolChecks the alignment of blade to the face of the fenceRare earth magnets hold it firmly on the blade250mm long makes it easy to spot any discrepancyScale on the tip helps set fence for cutting veneers or thin boardsHoles for drawing circles in 25mm steps from 75 to 400mmAccurately machined...
Axminster Thin Rip Jig Axminster Thin Rip Jig 2
Available
Bandsaw Accessories

Axminster Thin Rip Jig

Axminster
501146
BGN90.00
Makes repetitive ripping of thin strips easy and safeCuts to the left of the blade, preventing burning, binding and kickbackMade from heavy duty aluminium extrusions with a built-in scaleLocks into any 19 x 10mm mitre gauge slotCan be used for curved work on a bandsaw
Axminster Craft Mitre Fence... Axminster Craft Mitre Fence... 2
Available
Bandsaw Accessories

Axminster Craft Mitre Fence For 19mm Slots

Axminster Craft
104928
BGN106.00
Cut a perfect mitre every timeExcellent upgrade for machines or router tablesFits all 19 x 9.5mm (3/4" x 3/8") mitre gauge slotsSuitable for plain or T-slotsAdjustable grub screws for perfect fit in the slotRobust 5mm steel quadrantIndexed stops at common angles
Axminster HBS350N Blade...
Available
Bandsaw Accessories

Axminster HBS350N Blade Guide Set

Axminster
102273
BGN116.00
Complete set of bandsaw blade guides from our HBS350N bandsawWould fit many other brands of machine with little or no modificationFeatures micro adjustment on the top guides and full ball bearing blade support
Axminster BS11 Blade Guide Set
Available
Bandsaw Accessories

Axminster BS11 Blade Guide Set

Axminster
102274
BGN140.00
Provides ball bearing supports at rear and sides of bladeImproved support reduces blade vibrationGives cleaner, more accurate cutComplete set of upper and lower assemblies with bearings
Bow GuidePRO Bandsaw Feed... Bow GuidePRO Bandsaw Feed... 2
Available
Bandsaw Accessories

Bow GuidePRO Bandsaw Feed Guide

Bow Products
105276
BGN169.00
Makes re-sawing safer, easier and more accurateSilicone feather dampens vibration for clean cut150mm tall feather applies even pressure over full heightFlexible feather accommodates variations in workpieceDetachable base aids in bandsaw setupComfortable, ergonomic gripLeaves hands free for smoother feed rateOptional 100mm extension to offer 250mm of coverage
Axminster Trade AT1854...
Available
Bandsaw Accessories

Axminster Trade AT1854 Bandsaw Floor Stand

Axminster Trade
102028
BGN185.00
Floor stand to suit the Axminster Trade Series BS11 bandsawsMade from thick, powder coated steel for strength and stabilityLegs are adjustable to give a working height of 650-800mmSplayed legs give more stabilityHeight adjustable rubber feet to cope with uneven floors
Bandsaw Blade Guide System... Bandsaw Blade Guide System... 2
Available
Bandsaw Accessories

Bandsaw Blade Guide System Upgrade

Axminster
340889
BGN185.00
Provides ball bearing supports at rear and sides of bladeImproved support reduces blade vibrationGives cleaner, more accurate cutComplete set of upper and lower assemblies with bearings
UJK Technology Precision... UJK Technology Precision... 2
Available
Bandsaw Accessories

UJK Technology Precision Mitre Gauge And Fence

UJK Technology
104579
BGN242.00
Features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90°Anodised aluminium fence rail slides on fence bodyFlip-over length stop for repeat accuracyIndexing stop system is adjustable for total accuracyMakes it easy to quickly cut a perfect mitre jointStandard 3/4" x 3/8" (19 x 9.5mm), 320mm bar, removable locking washer
Axminster Rip Fence Upgrade Axminster Rip Fence Upgrade 2
Available
Bandsaw Accessories

Axminster Rip Fence Upgrade

Axminster
100205
BGN265.00
Upgrade for old and worn rip fencesSimple to fit, set up, and useBall bearing guiding for easy runningRigid mounting rail and fence extrusionSimple vertical clamping lever
Axminster Crank Adjust... Axminster Crank Adjust... 2
Available
Roller Stands

Axminster Crank Adjust Roller Stand

Axminster
101699
BGN265.00
Roller stand with height adjustment by crank handleRack and pinion system gives precise height controlLarge, heavy duty roller with twin ball bearingsCast iron base with four legs and rubber feet
Axminster Deluxe Rip Fence...
Available
Bandsaw Accessories

Axminster Deluxe Rip Fence Upgrade

Axminster
102426
BGN376.00
Upgrade for old or worn rip fences on bandsaws or table sawsSimple to fit, set up and useBall bearing guiding for easy runningRigid mounting rail and fence extrusion, twin fence positionsSimple cam clamping lever, locks in position securely
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text