Two sizes of limiter cutter block, 78mm and 100mm, both with 30mm bores, which designed to accept the range of Euro cutters and limiters shown within this section. The 78mm block is designed for use with the 40 x 4mm Euro and Whitehill cutters, whereas the 100mm block will accept both 40 x 4mm and 50 x 4mm Euro cutters plus the 40 x 4mm and 55 x 4mm Whitehill cutters. For those who are unfamiliar with spindle moulder tooling, limiters are a safety device designed to limit the amount of cut taken by the cutters on each rotation of the block. They take the form of a dummy cutter with the profile cut slightly below the cutter profile and with the sharp edges removed. They fit into the slots in the block in front of the main cutters and are secured by the same wedge as the cutters. The blocks are supplied with a pair of rebate knives and limiters. The 100mm block is aluminium and the 78mm block is steel.
- Two sizes of limiter cutter block - 100mm aluminium and 78mm steel
- 30mm bores only
- 78mm block accepts 40 x 4mm Euro and Whitehill cutters
- 100mm block accepts 40 x 4mm and 50 x 4mm Euro, also 40 x 4mm and 55 x 4mm Whitehill cutters
- Supplied with a pair of rebate knives and limiters
Само за 22.44 лв. на месец
- Bore Size
- 30 mm
Digital readings with a resolution of 0.1°Displays either absolute or relative anglesBack lit LCD screen with 10mm high figures; easy to readMagnets in base grip onto steel and ferrous surfacesDurable aluminium frame, dust and waterproof to IP54Lightweight and portable; 60 x 60 x 25mm, weight 70gAuto shut-off after 5 minutesPowered by a standard AAA...
Hex Bit Sets
Universal shank magnetic bit holderUniversal shank locking bit holderLong-life TiN coated 25mm bitsPozi (Red) PZ1 x 3, PZ2 x 2Phillips (Blue) PH1 x 2 and PH2 x 3Torx (Yellow) T10 x 2, T15 x 3, T20 x 2, T25 x 2, T30 x 2Slotted (Green) 4mm x 3, 6.5mm x 2Universal shanks fit all quick change systems including Festool CENTROTECSteel storage box
Torx Head Woodscrews
Top quality zinc plated wood screws with a self countersinking headThey have deep sharp threads that cut into the wood, not forcing throughPenetrating tip that requires no pilot hole or pre-drillingHeat treated to ensure they are hard and resistant to snappingFor use in soft or hard wood, MDF or chipboardTorx heads and wax lubricated for the easiest...
75mm longAdjustable depth settingFit all hex shank and quick change systems, including Festool's CentrotecMagnetic ring securely holds the screw on the screwdriver bitSleeve locks for consistent screw depth