Axminster Standard 60 Degree Live Revolving Centre
60° live centre
Incorporates two 'sealed for life' dust proofed bearings
Will cover 90% of all turning applications
The most familiar of the live revolving centres and the one that most of us use. This 60° live revolving centre is made from top quality materials, incorporates two 'sealed for life' dust proofed bearings and will cover 90% of all turning applications.
Simple and quick to use ratchet-type mechanismSingle handed operation, other hand free to hold work in position80 mm deep throatMade in UKFitted with non-marring plastic jaw padsMaximum clamping pressure 85Kg
Adjustable-fit neck keeps shavings outKnitted fabric at rear of collar for maximum comfortNo compromise of safety when used with powered respiratorShorter sleeves; no loose fabric near workpieceQuality nylon zipper; cover flap keeps out dustMachine washable 35/62, cotton/polyesterConvenient pencil pocketRear pockets keep items handy without collecting...
Digital readings with a resolution of 0.1°Displays either absolute or relative anglesBack lit LCD screen with 10mm high figures; easy to readMagnets in base grip onto steel and ferrous surfacesDurable aluminium frame, dust and waterproof to IP54Lightweight and portable; 60 x 60 x 25mm, weight 70gAuto shut-off after 5 minutesPowered by a standard AAA...
Turns any 60° live centre into a ring centre or cup centre60° internal angle fits over live centre tipPoint of the live centre remains slightly proud for centringUseful when turning timbers with a tendency to splitRing centre offers better support to delicate timberReversed the converter becomes a cup centre
EC Class 1 standard for guaranteed accuracyPermanently etched, black filled graduationsMetric graduations millimetres and half millimetresHardened stainless steel for durabilityPearl chrome anti-glare finishMetric/imperial conversion table on reverse
Universal shank magnetic bit holderUniversal shank locking bit holderLong-life TiN coated 25mm bitsPozi (Red) PZ1 x 3, PZ2 x 2Phillips (Blue) PH1 x 2 and PH2 x 3Torx (Yellow) T10 x 2, T15 x 3, T20 x 2, T25 x 2, T30 x 2Slotted (Green) 4mm x 3, 6.5mm x 2Universal shanks fit all quick change systems including Festool CentrotecSteel storage box
Achieves a smoother surfaceEasier to apply waxes over sealerPre-thinned for convenience and easier useIncreases effectiveness of final finishSuitable for woodturning and carvingSupplied in 500ml double sealed tin
75mm longAdjustable depth settingFit all hex shank and quick change systems, including Festool's CentrotecMagnetic ring securely holds the screw on the screwdriver bitSleeve locks for consistent screw depth