This somewhat oversize centre is particularly useful when turning large diameter pieces or roughing unbalanced work prior to chucking, as with end grain hollow forms. The principle is that the increased diameter of the drive greatly reduces the risk of slipping due to the increased leverage resulting from turning a larger diameter workpiece. The diameter of the 4 prong head is 38mm(1.1/2"). Available in either 2MT or 3MT.
You might also like
One Handed Bar Clamps
Axminster Trade Clamps
Simple and quick to use ratchet-type mechanismSingle handed operation, other hand free to hold work in position80 mm deep throatMade in UKFitted with non-marring plastic jaw padsMaximum clamping pressure 85Kg
Aprons & Smocks
Axminster Evolution Series
Adjustable-fit neck keeps shavings outKnitted fabric at rear of collar for maximum comfortNo compromise of safety when used with powered respiratorShorter sleeves; no loose fabric near workpieceQuality nylon zipper; cover flap keeps out dustMachine washable 35/62, cotton/polyesterConvenient pencil pocketRear pockets keep items handy without collecting...
Diamond Sharpening Stones
4 different diamond grits52 x 20mm of diamond coating; double-ended & double-sidedExtra coarse 120grit, coarse 180gritMedium 240grit and fine 320gritGrit size stamped into the steel for easy recognitionUseful for sharpening or touching-up many toolsOverall length is 180mm
Digital readings with a resolution of 0.1°Displays either absolute or relative anglesBack lit LCD screen with 10mm high figures; easy to readMagnets in base grip onto steel and ferrous surfacesDurable aluminium frame, dust and waterproof to IP54Lightweight and portable; 60 x 60 x 25mm, weight 70gAuto shut-off after 5 minutesPowered by a standard AAA...
Hex Bit Sets
Axminster Trade Bitz
Universal shank magnetic bit holderUniversal shank locking bit holderLong-life TiN coated 25mm bitsPozi (Red) PZ1 x 3, PZ2 x 2Phillips (Blue) PH1 x 2 and PH2 x 3Torx (Yellow) T10 x 2, T15 x 3, T20 x 2, T25 x 2, T30 x 2Slotted (Green) 4mm x 3, 6.5mm x 2Universal shanks fit all quick change systems including Festool CentrotecSteel storage box
Respiratory Protection - Non Powered
Protection level FFP2A better fitting mask for better protectionInternal structure results in an unrivalled secure fitStructure maximises fit, comfort and performanceTyphoon™ valve reduces breathing resistanceAdjustable straps for a improved fitFoam strip around the inside forms a better sealWelded nosepiece improves the fit around the topCompatible with...
Axminster Trade Bitz
75mm longAdjustable depth settingFit all hex shank and quick change systems, including Festool's CentrotecMagnetic ring securely holds the screw on the screwdriver bitSleeve locks for consistent screw depth