Accessories for Pillar Drills

Axminster Tool Maker's Clamps Axminster Tool Maker's Clamps 2
Available
Accessories for Pillar Drills

Axminster Tool Maker's Clamps

Axminster
ax819663
BGN15.00
Designed for maximum strength and rigidityUseful for holding smll parts together for drilling, tapping ectMade from steel with hardened, ground jawsVery high holding strength
Pillar Drill Chuck Guards Pillar Drill Chuck Guards 2
Available
Accessories for Pillar Drills

Pillar Drill Chuck Guards

Axminster
ax842235
BGN18.00
A range of chuck guards for most pillar drill sold todayAvailable in collar sizes from 40-92mmFlip-up design and clear perspex guard, adjustable for heightPlease measure your drill presses collar before ordering
Axminster Drill Clamps Axminster Drill Clamps 2
Available
Accessories for Pillar Drills

Axminster Drill Clamps

Axminster
ax23568
BGN34.00
Useful clamp for any pillar drill and a host of other applicationsToggle actionSecured to table with a single stud and nutAvailable in two sizes 150 or 225mm overall length
Axminster 13mm Keyed Chuck
Available
Accessories for Pillar Drills

Axminster 13mm Keyed Chuck

Axminster
700406
BGN34.00
Good quality 13mm keyed chuck, B16 arbor fittingJaw opening range is 1-13mmSuitable for use in pillar drills and lathesJaws will close to a very small diameterA choice of arbors available separately
Axminster 13mm Keyed Chuck... Axminster 13mm Keyed Chuck... 2
Available
Accessories for Pillar Drills

Axminster 13mm Keyed Chuck & Arbors

Axminster
ax809590
BGN45.00
Good quality key operated chucks offering excellent valueAvailable complete with a choice of arborAn excellent accessory for boring on a woodturning latheJaws will close to very small diameter
Axminster 13mm Super...
Available
Accessories for Pillar Drills

Axminster 13mm Super Precision Drill Chuck

Axminster
500228
BGN78.00
For high accuracy drillingExcellent run out and torque transmission characteristicsClose tolerance key fitSuper precision ground J6 taperGround arbors available seperately
Morticing Attachment
Available
Accessories for Pillar Drills

Morticing Attachment

Axminster
610053
BGN79.00
Converts a pillar drill into a lightweight morticing machineFits onto the collar where the chuck guard is normally mounted65mm mounting diameter mounting bracketLoose adaptors also supplied for 60mm and 55mm diameter collarsBest fitted using an MDF mounting plate, (not supplied)Not suitable for use with the Axminster Hobby pillar drills or the Jet JDP8,...
Axminster 13mm & 16mm... Axminster 13mm & 16mm... 2
Available
Accessories for Pillar Drills

Axminster 13mm & 16mm Keyless Chucks

Axminster
ax816730
BGN156.00
Rugged, all steel drill chucks, all with B16 mounting tapersSuitable for use in drill presses, milling machines or all types of lathesAvailable in 13 or 16mmJaw opening range is 0-13mm or 3-16mm.Chucks fit the optional B16- 1, 2 or 3MT arbors listed separately
Axminster 13mm Keyless Chuck
Available
Accessories for Pillar Drills

Axminster 13mm Keyless Chuck

Axminster
700404
BGN156.00
Rugged, all steel drill chucks, all with B16 mounting tapersSuitable for use in drill presses, milling machines or all types of lathesJaw opening range is 0-13mmChucks fit the optional B16- 1, 2 or 3MT arbors listed separately
Axminster Universal Drill...
Available
Accessories for Pillar Drills

Axminster Universal Drill Chuck Guard

Axminster
103249
BGN159.00
A universal drill chuck guard for many pillar drills or vertical millsMounting bracket included, fits with just two boltsRotary switch included for interlocking with your machine's NVR switchLarge, transparent shield gives a clear view of your workFitted as standard to many of our Engineer Series pillar drills
Axminster 16mm Keyless Chuck
Available
Accessories for Pillar Drills

Axminster 16mm Keyless Chuck

Axminster
700405
BGN179.00
Rugged, all steel drill chucks, all with B16 mounting tapersSuitable for use in drill presses, milling machines or all types of lathesJaw opening range is 3-16mmChucks fit the optional B16- 1, 2 or 3MT arbors listed separately
Axminster Pillar Drill Table Axminster Pillar Drill Table 2
Available
Accessories for Pillar Drills

Axminster Pillar Drill Table

Axminster
100241
BGN210.00
Increases the work area, better supportMakes drilling safer and more precise25mm coated MDF base board 610 x 305 x 25mmFull length fence, adjustable fence plates and repeat stopL&R scales and rear dust extraction portT-slots with material clamps63mm dust outlet
Axminster CT1 Compound Table
Available
Accessories for Pillar Drills

Axminster CT1 Compound Table

Axminster
400385
BGN343.00
Cast iron, two axes compound tableTwo T slots (15mm-20mm wide x 10mm deep, 60mm apart)Surface ground for an exceptionally fine finishExcellent table travel with adjustable gibsCalibration of wheels in imperial with 100 sub-divisions200 x 270mm base
Compound Table for X0 Micro...
Available
Accessories for Micro Drills

Compound Table for X0 Micro Drill

Axminster
101380
BGN490.00
Miniature compound table for drilling and milling applications200 x 90mm table has four T-slots for work clamping130mm sideways and 70mm front-to-back travel1mm per rev. on both adjustment wheelsOverall height 72mm
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text