For cleaning and reviving highly polished surfaces. It will remove haze, bloom and water marks from French polish, lacquers and modern finishes. It will clean ivory, brass fittings, mother of pearl, tortoise-shell and papier-mache. It can also be used to burnish friction polish on the lathe.
You might also like
Titebond Original recommended for use with biscuit jointsIdeal for all interior furniture projectsAliphatic Resin suitable for wood, leather, clothStrong initial tack, open time 5 minutesAssembly time 10-15 minutesShelf life 2 years (kept airtight)
One Handed Bar Clamps
Simple and quick to use ratchet-type mechanismSingle handed operation, other hand free to hold work in position80 mm deep throatMade in UKFitted with non-marring plastic jaw padsMaximum clamping pressure 85Kg
Triple diamond ground FineLine teeth, super sharp and long lastingRigid blade with low friction, rust resistant PTFE coatingHeavy duty soft grip comfort handleChoice of length and tpi
Class 1 accuracy – the most accurate tape measure availableHeavy duty, impact resistant casePositive blade lockBlade pause buttonTrue zero tipBelt clipMetric and imperial graduations
Diamond Sharpening Stones
4 different diamond grits52 x 20mm of diamond coating; double-ended & double-sidedExtra coarse 120grit, coarse 180gritMedium 240grit and fine 320gritGrit size stamped into the steel for easy recognitionUseful for sharpening or touching-up many toolsOverall length is 180mm
Digital readings with a resolution of 0.1°Displays either absolute or relative anglesBack lit LCD screen with 10mm high figures; easy to readMagnets in base grip onto steel and ferrous surfacesDurable aluminium frame, dust and waterproof to IP54Lightweight and portable; 60 x 60 x 25mm, weight 70gAuto shut-off after 5 minutesPowered by a standard AAA...
Hex Bit Sets
Universal shank magnetic bit holderUniversal shank locking bit holderLong-life TiN coated 25mm bitsPozi (Red) PZ1 x 3, PZ2 x 2Phillips (Blue) PH1 x 2 and PH2 x 3Torx (Yellow) T10 x 2, T15 x 3, T20 x 2, T25 x 2, T30 x 2Slotted (Green) 4mm x 3, 6.5mm x 2Universal shanks fit all quick change systems including Festool CENTROTECSteel storage box
Respiratory Protection - Non Powered
Protection level FFP2A better fitting mask for better protectionInternal structure results in an unrivalled secure fitStructure maximises fit, comfort and performanceTyphoon™ valve reduces breathing resistanceAdjustable straps for a improved fitFoam strip around the inside forms a better sealWelded nosepiece improves the fit around the topCompatible with...
75mm longAdjustable depth settingFit all hex shank and quick change systems, including Festool's CentrotecMagnetic ring securely holds the screw on the screwdriver bitSleeve locks for consistent screw depth
LightweightDisposable latexProvides protection from stains etc. when dyeing or using pigmentsPack of 100 individual gloves (50 pairs)
Convenient, lightweight clamp great for general useNodular graphite cast iron armQuick and positive adjustmentBoth jaws feature plastic caps to protect the workStrong clamping pressure