List of products by brand Veritas
Precision machined at the traditional 1:6 & 1:8 anglesLong legs ensure accurate registrationContinuous line can be transferred around the cornerStraight and angled lines can be scribed simultaneously, ensuring alignmentInside corner is relieved to ensure flush seating even on saw whiskersAnodised aluminium, light and durable
Excellent for cutting projecting dowels or plugsDouble edged 22tpi with teeth set one waySingle edged 26tpi with no setJapanese style tooth patternFlexible blades cut on the pull strokeOverall length 290mm(11.1/2") with 120mm(4.3/4") bladeMade in Canada
Bench Dogs & Holdfasts
Made from solid brass rod so are non-corrodingCombined crosshatching and 2° slope face hold wood securelySide spring slides cleanly and holds it wellBench dog 110mm, Bench Pups at 60mm (both fit 19mm hole)For benches with tops up to 50mm thickIdeal for use in bench sidesWorks well with Wonder Dog and Wonder Pup ClampsMade in Canada
Hardened steel wheel cutterCuts wood fibres, rather than tearsMarks cleanly, even on cross grainThe wheel retracts into the face of the gauge for storage and protectionThe gauges are very easy to setUse as a depth gauge to transfer measuremetsMade in Canada
For putting tapered tenons on turnings, dowels or rustic furniture componentsStraight-edged blade tapers the endsSize given for each cutter is the minimum tenon diameter it will cut; the maximum is 1/2" greater3/8", 1/2" and 5/8" sizes will cover most tenoning requirements for typical chair-makingThe curved blade (for dowel making) should be used with...
Available in diameters from 5/16" to 9/16", latter used for chair rungs1/2" are useful for trellis or lattice workAll have a straight blade that cuts a 60° shoulder tenon (not a radiused shoulder tenon)5/16" size cuts tenons up to 1" long1/2" and 9/16" sizes cut tenons up to 1.3/8" longA plug gauge is included for easy blade setting, 3/8" round shankFor...
Canadian-made precision steelGround flat to within 0.025mm on both edgesStress-relieved, remains true under temp. change38mm wideStands on edge unsupported, so hands free for precise measurementHang holes, for easy storageLinished sides give a textured surface making straightedge easier to grip610 x 6.3mm (24" x 1/4") thick - 1kg915 x 9.5mm (36" x 3/8")...
For turners: open the calliper by just pulling the legs apartSpacing nut between the legs rather than outside facilitatesPosition and then set the spacing nut to the wall thicknessOpen callipers, remove and measure tip gapSpacing nut adjustable for any thicknessFrom 0 to 343mm on 420mm model and 0 to 140mm on 230mm modelRespective throat depths: 295mm and...
Machined double guide rods, single-lead Acme screwsRegular front vice is 175 x 375mm(7" x 14.3/4") with a clamping capacity of 210mm(8.1/4")Large front vice is 265 x 533mm(10.1/2" x 21") with a clamping capacity of 330mm(13")Note capacity quoted is less the thickness of any wooden jaws fittedLarge front vice has an offset center screw to prevent...
Cut smooth, perfect tenons with radiused shouldersCutters run vibration-free while being driven by an electric drillYield the same accuracy when used with a hand braceAnodized aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurateThe back end of the blade is safely contoured to avoid anything extending...
Rebate & Shoulder Planes
Skewed blade reduces cut resistance, aids in shaving clearanceCorner cut is clean and accurateScoring spur sits ahead of the blade, reduces tear-out on cross-grainDouble guide rods and a collet locking system prevent the fence from rackingFence allows a maximum rabbet width of 38mmAdjustable shoe for depth of cut to a maximum 19mm (shoe removable for...