List of products by brand Lamello

Lamello Insertion Tool for...
Available
Biscuit Jointing Accessories

Lamello Insertion Tool for Tenso Pre-Loading Clips

Lamello
102118
BGN14.00
For the easy insertion of pre-loading clips into a Tenso connectorPre-loading lowers the force required without lessening the final powerSelf-locking, self-clamping for rapid assembly with or without glueGlue up sections then proceed immediately with the rest of the project
Lamello Tenso Pre-load Tool... Lamello Tenso Pre-load Tool... 2
Available
Biscuit Jointing Accessories

Lamello Tenso Pre-load Tool For P-14 & P-10

Lamello
105750
BGN15.00
For the easy insertion of pre-loading clips into a Tenso connectorFits both P-14 and P-10 size pre-loading clipsPre-loading lowers the force required without lessening the final power
Lamello Clamex Covercaps Lamello Clamex Covercaps 2
Available
Lamello Clamex Connectors & Accessories

Lamello Clamex Covercaps

Lamello
ax791626
BGN17.00
Simple push fit coversLocate in the 6mm hole for the locking mechanismAvailable in packs of 100
Lamello Biscuits Lamello Biscuits 2
Available
Wooden Biscuits

Lamello Biscuits

Lamello
ax21609
BGN21.00
Compressed precision beech biscuitsHold tolerance so are never too loose or too tightCan be planed leaving a clean solid timber finishExpand when immersed in glue
Lamello Cabineo Hex Drive...
Available
Lamello Cabineo CNC Connectors & Accessories

Lamello Cabineo Hex Drive 1/4" Bit

Lamello
103946
BGN23.00
Long ball-end hex bit with 1/4" hex shankUse with cordless screwdriver for tightening CabineoMaximum torque setting 25Nm
Lamello Cabineo Cover Caps Lamello Cabineo Cover Caps 2
Available
Lamello Cabineo CNC Connectors & Accessories

Lamello Cabineo Cover Caps

Lamello
ax981339
BGN31.00
Quick installation, simply clip into placeOffers neat, clean finishAvailable in range of coloursPrevents dust, debris entering fixing slot
Lamello Bisco Biscuit P-14 Lamello Bisco Biscuit P-14 2
Available
Lamello Plates & Connectors

Lamello Bisco Biscuit P-14

Lamello
ax831211
BGN57.00
Plastic aligning and/or connecting biscuitGives added shear strength7mm thick plastic biscuit, can be glued if requiredFor slot produced by P system Zeta or CNC grooveP-14 size 65 x 27mm
Lamello Invis Mx2 Studs
Available
Invis Jointing

Lamello Invis Mx2 Studs

Lamello
506237
BGN82.00
Use with Mx2 connector30mm gives stronger hold in materials like particle boardsMX2 is the latest connector, 250kg of clamping force,Hard nickel surface, stud has deeper set thread to make threading easierPack of 20
Lamello Self Clamping... Lamello Self Clamping... 2
Available
Lamello Plates & Connectors

Lamello Self Clamping Biscuit E20H

Lamello
ax842568
BGN85.00
Self clamping insertPulls together and holds the timber components while the glue curesMade from glass fibre reinforced plasticMeasures 27 x 23 x 4mmSuitable for timber thicker than 35mm
Lamello Tenso P-14 Connectors Lamello Tenso P-14 Connectors 2
Available
Lamello Plates & Connectors

Lamello Tenso P-14 Connectors

Lamello
ax957457
BGN104.00
Self-locking, self-clamping for rapid assemblyInvisible fitting clamps with a tensile force of 15kgRequires no further clampingGlue up sections then proceed immediately with the rest of the projectPre-loading lowers the force required without lessening the final powerP-System slot cut with either Lamello Zeta P2 or with factory CNC machine
Lamello Clamex S-18 Connectors Lamello Clamex S-18 Connectors 2
Available
Lamello Clamex Connectors & Accessories

Lamello Clamex S-18 Connectors

Lamello
ax781196
BGN105.00
Clamex S-18 - the innovative biscuit-shaped connector from LamelloAligns and connects, 2 functions in oneMaximum aesthetics due to minimal hole size for opening and closing of the connectionNo torsional movement due to aligning pinsMany angles possibleStackable, since no parts protruding from the surfaceEasy installation with any Lamello biscuit...
Lamello Divario Connectors Lamello Divario Connectors 2
Available
Lamello Divario Connectors & Accessories

Lamello Divario Connectors

Lamello
ax955055
BGN188.00
Lamello’s ingenious, self clamping, sliding connectorEasy installation of dividers or shelves into a fixed frameForms a strong joint with no visible connectors or shelf supportsSupports the shelf during insertion, making assembly straightforwardFinal assembly requires no further use of tools, glues or clampsIdeal for flat pack transportation and assembly...
Lamello Tenso P-10...
Available
Lamello Plates & Connectors

Lamello Tenso P-10 Connector & Pre-load Clip

Lamello
ax1009471
BGN189.00
No need for clamps, locks joints together instantlySelf-locking, self-clamping for rapid assemblyInvisible, internal clamp with high tensile forceP-10 only 10mm installation depth for thinner materialGlue-up sections then proceed immediately with the rest of the projectPre-load clips lower assembly force, without lessening the final powerP-System slot cut...
Lamello Clamping Plates K20 Lamello Clamping Plates K20 2
Available
Lamello Plates & Connectors

Lamello Clamping Plates K20

Lamello
ax22531
BGN193.00
Red plastic biscuit for dry assemblyBarbs moulded onto surface ensure a secure fitStandard No. 20 biscuit slot
Lamello Clamex P-10 Small... Lamello Clamex P-10 Small... 2
Available
Lamello Clamex Connectors & Accessories

Lamello Clamex P-10 Small Connector for Zeta

Lamello
ax886092
BGN256.00
Unique fitting to overcome many design problemsClamps, locking joint in place and is also detachableNo glue or screws are required, simple assemblyOnly visible sign of joint is a single 6mm holeSpecial 'T' slot needs to be cut by Lamello Zeta biscuit jointerFor 13mm panels size 52 x 19 x 9.7mmMade from fibreglass reinforced plastic for strengthSuitable...
Lamello Clamex P-14 Zeta... Lamello Clamex P-14 Zeta... 2
Available
Lamello Clamex Connectors & Accessories

Lamello Clamex P-14 Zeta Connector

Lamello
ax945768
BGN256.00
Unique fitting to overcome many design problemsClamps, locking joint in place and is also detachableNo glue or screws are required, simple assemblyOnly visible sign of joint is a single 6mm holeSpecial ‘T’ slot needs to be cut by Lamello Zeta biscuit jointerJoint angles 30 – 180°Made from fibreglass reinforced plastic with zinc die-cast leverSuitable for...
Lamello Clamex P Medius... Lamello Clamex P Medius... 2
Available
Lamello Clamex Connectors & Accessories

Lamello Clamex P Medius Connector for Zeta

Lamello
ax877210
BGN256.00
Unique fitting to overcome many design problemsMedius centre panel connector, 2 connectors will work back to backMinimum 16mm thick central panel (30mm max)Clamps, locking joint in place and is also detachableNo glue or screws are required, simple assemblyOnly visible sign of joint is a single 6mm holeSpecial 'T' slot needs to be cut by Lamello Zeta...
Lamello Cabineo 8 For... Lamello Cabineo 8 For... 2
Available
Lamello Cabineo CNC Connectors & Accessories

Lamello Cabineo 8 For Centre Panels

Lamello
ax981359
BGN424.00
The CNC connector of the futureEfficient machining and faster assemblySurface machining, no edge drilling necessaryCabinets shipped flat-packed with connectors pre-installedPanels virtually self-locate due to slightly protruding screwAccurate, fast assembly with a cordless drillCabineo 8 for centre and intermediate panels
Lamello Cabineo 12 For... Lamello Cabineo 12 For... 2
Available
Lamello Cabineo CNC Connectors & Accessories

Lamello Cabineo 12 For Corner Joints

Lamello
ax981356
BGN424.00
The CNC connector of the futureEfficient machining and faster assemblySurface machining, no edge drilling necessaryCabinets shipped flat-packed with connectors pre-installedPanels virtually self-locate due to slightly protruding screwAccurate, fast assembly with a cordless drillCabineo 12 for corner joints
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text