Moulding & Tenoning-bg

Показани са 1-24 от общо 137 артикул(а)

Cill Block & Cutters-bg

Whitehill Cill Block with Radiusing Option

200924

9° angle for moulding window cillsAluminium for low inertiaTwo cutting knives and two radius cuttersScribing knives top and bottomSlots are grooved for added security-bg

View

Wobble Saws & Groovers-bg

Axcaliber Three Piece Adjustable Grooving Set

702478

Super-strength steel body, 150mm diameter, 30mm bore2 HWM Knives 7.65 x 12 x 1.5mm4 HWM Knives 18 x 18 x 1.5mm4 HWM Knives 14 x 14 x 1.2mm10 spacers, 0.1-1mm, creates grooves 4-15mmSuitable for manual feed, speed range 5,000-8,000rpm-bg

View

Spindle Moulder Accessories-bg

Square Table for Axminster WS1000TA

950505

Provides support for panels and long boardsEasy to fit and can be removed for storage when not requiredSupplied with a long fence with a length stop-bg

View

Chamfer & Profile, Blocks & Cutters-bg

Axcaliber Edge Profile Cutter

501072

For machining concave quarter coves with 4, 6, 8 and 10mm radiiFor battens, ledges, furniture components etc.Suitable for use in solid timber or wooden boardsEquipped with two reversible TC profiling knivesChip thickness limitation for reduced recoil and low noiseMade in high tensile alloy for light weight and high strength-bg

View

Chamfer & Profile, Blocks & Cutters-bg

Axcaliber Adjustable Chamfering Cutter Head

501069

For jointing or chamfering at various anglesCan also rebate with optional scribing disc40mm TC knives held in swivelling bodiesInfinitely adjustable or use 7.5° and 15 positive stops120mm diameter body, made in high tensile alloy-bg

View

Jointing Heads & Cutters-bg

Axcaliber Reverse Glue Joint Cutter Head

702471

Hard aluminium alloy body with high resistance to tensile and yield stress2 HWM Knives 50 x 18 x 2mmSuitable for manual feedPins for the automatic positioning of the knivesSupplied in a storage box-bg

View

Jointing Heads & Cutters-bg

Axcaliber 45deg Lock Mitre Cutter Head

702467

Hard aluminium alloy body with high resistance to tensile and yield stress2 Interchangable TC KnivesPins for the automatic positioning of the knivesSupplied in a storage box-bg

View

Spindle Moulder Accessories-bg

Axcaliber Ball Bearing Following Ring Set

508457

Set of nine follower rings including a bearing and security capUse to create curves either by hand or using a templateRings are made from high tensile alloy for light weight and durabilitySized from 90-130mm in 5mm increments-bg

View

Stile & Rail, Block & Cutters-bg

Axcaliber One Piece Rail & Stile Cutter Head

702505

Hard aluminium alloy body with high resistance to tensile and yield stress2 HWM Knives type (B) 40 x 24.5 x 2mmSuitable for manual feed( MAN)Pins for the automatic positioning of the knivesSupplied in a solid plastic box-bg

View

Wobble Saws & Groovers-bg

Omas 200mm Wobble Saw

300245

Tungsten carbide saw blade mounted between two special shaped bossesWidth of cut is infinitely variable between 3.2 & 18mmMaximum speed 4,000rpm30mm bore-bg

View

Wobble Saws & Groovers-bg

Omas 150mm Wobble Saws

300242

Tungsten carbide saw blade mounted between two special shaped bossesWidth of cut is infinitely variable between 3.2 & 15mmMaximum speed 6,000rpm30mm bore-bg

View

Euro Block & Cutters-bg

Whitehill Combihead Scribe and Rebate Block

950543

A true multifunction spindle moulder blockUsed as a rebate block to produce exceptionally clean rebatesWill take most standard 40, 50 or 55mm moulding knives and limitersRecessed for flush mounting with a countersunk screwMaterial can be passed above the cutter blockA great choice for small to medium sized spindle mouldersBore size 30mm-bg

View

Jointing Heads & Cutters-bg

Axcaliber Spiral Jointing Cutter Head

501074

Used for rough planing and routing out curved elements on a ring fenceFitted with 12 TC knives, each with four cutting edgesJust loosen each knife and rotate to a fresh edge when bluntThe blades are positioned on a spiral for a low noise, clean cutMade from high tensile alloy for low weight and high strengthMax speed 9,000rpm-bg

View

Rebate Blocks & Cutters-bg

Whitehill 4 Knife Shearcut Rebate Block

800461

125mm diameter, manufactured from steel12mm wide x 50mm long tungsten carbide double-sided replaceable knivesTwo 14mm scribing cutters top and bottom, gives a perfect square cornerSuited for productions runs of materials, window and door manufacturingMaximum rebate is 30mmAvailable in 30mm bore only-bg

View

Panel Raising-bg

Whitehill Panel Raising Head

134076

Under or over cutter headCan produce a variety of profilesFully compliant with the very latest regulationsAvailable with a 140mm cutting diameterSmaller cutting block suited to lighter weight moulders-bg

View

Jointing Heads & Cutters-bg

Axcaliber Professional Finger Joint Cutter Head

702469

Hard aluminium alloy body with high resistance to tensile and yield stress2 HWM Knives 49.6 x 11.9 x 1.5mmSuitable for manual feedPins for the automatic positioning of the knivesSupplied in a solid plastic box-bg

View

Wobble Saws & Groovers-bg

Whitehill 150mm Replaceable Tip Groovers

ax824723

Replaceable tip grooversThree different sizes from 8mm to 12mmMaintain exact cutting diameter - conventional groovers change diameter each time they are sharpenedCutting spurs on tipped grooversAvailable in 150mm diameter30mm boreComplete with tungsten tips-bg

View

Rebate Blocks & Cutters-bg

Axcaliber Shear Cutting Rebate Cutter Head

501284

Hard aluminium alloy body with high resistance to tensile and yield stressDepth 50mm, bore 30mm, 125mm diameter2 universal HWM straight knives 50 x 12 x 1.5mm4 universal HWM scribing knives 14 x 14 x 2mmSuitable for manual feed (MAN)Pins for the automatic positioning of the knives-bg

View

Whitehill Super Block-bg

Whitehill Super Block

134200

96mm diameter x 100mm deepOverall cutter profile area is up to 100mm x 17mmMade of aluminium with 30mm boreWorking Depth of block 78mmMaximum diameter of cutter head with cutters 132mm-bg

View

Chamfer & Profile, Blocks & Cutters-bg

Axcaliber 45deg Chamfer Cutter Head

702477

Hard aluminium alloy body with high resistance to tensile and yield stress2 HWM Knives 50 x 12 x 1.5mmSuitable for manual feedPins for the automatic positioning of the knives-bg

View

Panel Raising-bg

Axcaliber TCT Panel Raising Cutters

ax809891

Three winged tungsten carbide panel raising cuttersFor use on a spindle moulder with a 30mm diameter spindleSuitable for natural timbers or MDFBore 30mm, Diameter 138mm, Depth of cutter 16mmMaximum length of profile 38mm-bg

View

Tenoning Heads & Cutters-bg

Whitehill Limiter Tenoning Heads

ax824566

Aluminium and steel tenoning blocksUsed individually or mounted togetherCut square or profiled tenonsGreat for small batch production runs of small tenons or mouldingsSupplied with 30mm bore and use limiter cutters (all cutters are 6mm thick)1.1/4" diameter bore is available to special orderProfile area 30mm wide x 22mm deep, boss diameter is 60mmTenoning...

View

Euro Block & Cutters-bg

Whitehill Universal Moulding Block

134070

A truly universal 100mm spindle moulder blockAccepts most standard cutters including the range of 55mm Whitehill cuttersWill also accept blank cutter knivesRecessed for flush mounting with a countersunk head screwMaterial can be passed over the top of the cutter headThe use of limiters is an essential safety precautionCountersunk set screws available in...

View

Spindle Moulder Accessories-bg

Ring Fence for WS1000TA/AT200SM Spindle Moulders

951689

Creates edge mouldings to curved panels & workpiecesWill fit both the WS100/30 & WS1000TA spindle mouldersReplaces the standard hood/fence arrangement-bg

View