Челюсти за 114мм патронник Axminster

Показани са 1-24 от общо 33 артикул(а)

100mm Cylinder Jaws

100mm Cylinder Jaws 2

Челюсти за 100мм патронник Axminster

100mm Cylinder Jaws

Made in Axminster using CNC techniquesPair of cylindrical jaws for long, thin blanksGrips blank along a substantial lengthSmall size, 25mm diameter by 50mm long boreLarge size, 50mm diameter by 50mm long boreAccommodates a range of workpiece sizesInternal and external dovetails on ends-bg

View

100mm O'Donnell Jaw Sets

100mm O'Donnell Jaw Sets 2

Челюсти за 100мм патронник Axminster

100mm O'Donnell Jaw Sets

Made in Axminster using CNC techniquesAn extremely versatile set of jawsEnables better access to the workpieceIncludes 50mm, 38mm and 25mm jawsFits all Axminster 100mm and 114mm chucksDesigned for close-in tool workDeep recess holds long spigotsDovetailed inside and outside on lip50mm Jaws threaded to accept optional jaw insertsParallel central bore for...

View

100mm O'Donnell Spigot Jaws

100mm O'Donnell Spigot Jaws 2

Челюсти за 100мм патронник Axminster

100mm O'Donnell Spigot Jaws

Made in Axminster using CNC techniquesDesigned for close-in tool workDeep recess holds long spigotsDovetailed inside and outside on lipAvailable in three sizes50mm Jaws threaded to accept optional jaw inserts-bg

View

100mm Spigot Jaws

100mm Spigot Jaws 2

Челюсти за 100мм патронник Axminster

100mm Spigot Jaws

Made in Axminster using CNC techniquesDesigned to give improved grip on greenwoodWorks in the same way as a pin chuckSpigot jaws inserted into 30mm diameter by 50mm deep hole in blankCan also grip small round or square sectionsCan be re-tightened if it becomes loose within the blank-bg

View

100mm Wood Jaw Plates

100mm Wood Jaw Plates 2

Челюсти за 100мм патронник Axminster

100mm Wood Jaw Plates

Made in Axminster using CNC techniquesPre-drilled steel quadrantsSelf-made wooden jaws can be mounted using woodscrewsPerfect for re-chucking bowls or vases-bg

View

150mm Wood Jaw Plates

150mm Wood Jaw Plates 2

Челюсти за 100мм патронник Axminster

150mm Wood Jaw Plates

Made in Axminster using CNC techniquesProvides rechucking facility to refine the base of bowlsPlates can support larger wooden jaws, less prone to distortion under tightening loadsMake custom designed jaws, expands your lathes potential-bg

View

Axminster 115mm Soft Jaws

Axminster 115mm Soft Jaws 2

Челюсти за 100мм патронник Axminster

Axminster 115mm Soft Jaws

Allows you to create your own custom designed jawsEasy to machine with a 12mm flat scraperFits any 80mm diameter or above Axminster chuckExcellent addition to your workholding systemAre also non marking on delicate surfacesMade in the UK from high quality glass filled nylon-bg

View

Axminster Button Jaws 150mm

Челюсти за 100мм патронник Axminster

Axminster Button Jaws 150mm

Made in Axminster using CNC techniquesConical rubber buttons hold work gently and securelyFor use externally or internallyTapped holes offer a variety of diametersJaws supplied with complete with rubber buttonsReverse chuck smaller workpiecesSuitable for 80mm and 100mm chucks-bg

View

Axminster Button Jaws 250mm

Axminster Button Jaws 250mm 2

Челюсти за 100мм патронник Axminster

Axminster Button Jaws 250mm

Made in Axminster using CNC techniquesEight conical white rubber buttons grip workAluminium jaw platesSlots in each jaw allows fine adjustmentSpare buttons also available-bg

View

Axminster Button Jaws 400mm

Челюсти за 100мм патронник Axminster

Axminster Button Jaws 400mm

Made in Axminster using CNC techniquesEight conical white rubber buttons grip workAluminium jaw platesSpare buttons also available-bg

View

Axminster Buttons & Inserts

Челюсти за 100мм патронник Axminster

Axminster Buttons & Inserts

For Axminster Button JawsConical white rubber buttonsPack of 1 button and 1 x insert-bg

View

Axminster Evolution Long...

Челюсти за 100мм патронник Axminster

Axminster Evolution Long Accessory Mounting Jaws

Made in Axminster using CNC techniquesPrecision ground to ensure very high accuracyRadiused corners to minimise the chances of injury during useSuitable for use only with the 114mm Evolution chuck and jaws-bg

View

Axminster Internal &...

Axminster Internal &... 2

Аксесоари за универсали

Axminster Internal & External Safety Jaws

Made in Axminster using CNC techniquesVery useful jaws for many applicationsBuy individual sets or both internal & external sets togetherCompatible with Axminster SK80, SK100 and the EvolutionFeaturing the SafetyJaw style rounded corners for extra safety-bg

View

Axminster Pack of 4 Buttons...

Axminster Pack of 4 Buttons... 2

Челюсти за 100мм патронник Axminster

Axminster Pack of 4 Buttons and Inserts

For all sizes of Axminster Button jawsPack of 4 conical white rubber buttonsIncludes 4 inserts and 4 screws-bg

View

Axminster Precision Ground...

Axminster Precision Ground... 2

Челюсти за 100мм патронник Axminster

Axminster Precision Ground Accessory Mounting Jaws

Made in Axminster using CNC techniquesGround sides to ensure an accurate fitRadiused corners to minimise the chances of injury during useSuitable for use with all Axminster chucksThe perfect way to have your common jaws ready for use-bg

View

Axminster SK100 Cylinder...

Axminster SK100 Cylinder... 2

Челюсти за 100мм патронник Axminster

Axminster SK100 Cylinder Jaws - 25mm

Range: Cylinder 20mm to 38mm (Absolute max 49mm)Internal and external dovetails on end of jawsRange: Internal 22mm to 40mm (Absolute max 52mm)Range: External 55mm to 70mm (Absolute max 80mm)Suitable for SK100 and SK114 chucksCylindrical bore supports for long, thin blanksGrips blank along a substantial lengthMade exclusively by Axminster in Axminster-bg

View

Axminster SK100 O'Donnell...

Axminster SK100 O'Donnell... 2

Челюсти за 100мм патронник Axminster

Axminster SK100 O'Donnell Dovetail Jaws - 25mm

Potential gripping range: Internal dovetail 17mm to 34mmPotential gripping range: External dovetail 19mm to 46mmPotential gripping range: Spigot 10mm to 28mmRecommended for SK100 and SK114 chucksDrawing dimensions taken when jaws form true circleDesigned for close-in tool workMade exclusively by Axminster in Axminster-bg

View

Axminster SK100 O'Donnell...

Axminster SK100 O'Donnell... 2

Челюсти за 100мм патронник Axminster

Axminster SK100 O'Donnell Dovetail Jaws - 38mm

Potential gripping range: Internal dovetail 35mm to 50mmPotential gripping range: External dovetail 49mm to 66mmPotential gripping range: Spigot 28mm to 43mmRecommended for SK100 and SK114 chucksDrawing dimensions taken when jaws form true circleDesigned for close-in tool workMade exclusively by Axminster in Axminster-bg

View

Axminster SK100 O'Donnell...

Axminster SK100 O'Donnell... 2

Челюсти за 100мм патронник Axminster

Axminster SK100 O'Donnell Dovetail Jaws - 50mm

Potential gripping range: Internal 50mm to 65mmPotential gripping range: External 60mm to 74mmPotential gripping range: Spigot 43mm to 55mmDrawing dimensions taken when jaws form true circleRecommended for SK100 and SK114 chucksDesigned for close-in tool workDrilled and threaded to accept optional insertsMade exclusively by Axminster in Axminster-bg

View

Colossus 150mm Gripper Jaws

Colossus 150mm Gripper Jaws 2

Челюсти за 100мм патронник Axminster

Colossus 150mm Gripper Jaws

Made in Axminster using CNC techniquesThe jaws will expand into a 150mm(6") dovetailed recess orGrip onto a spigot of approximately 125mm(5") in diameterVery positive secure grip onto the workpiece-bg

View

Piranha 114mm Gripper Jaws

Piranha 114mm Gripper Jaws 2

Челюсти за 114мм патронник Axminster

Piranha 114mm Gripper Jaws

Made in Axminster using CNC techniquesPiranha jaws for any 100mm or 114mm Evolution chuckA versatile jaw set offering large gripping surfacesInternal/external dovetail grippingRecommended range: 62-80mm internal, 85-103mm externalPerfect for hollow forms or unseasoned wood-bg

View

Type A 100mm Dovetail Jaws

Type A 100mm Dovetail Jaws 2

Челюсти за 100мм патронник Axminster

Type A 100mm Dovetail Jaws

Manufactured in Axminster using CNC techniquesPart of an extensive range of work holding accessoriesExpands into a 100mm dovetailed recessCompresses onto 60mm and 25mm x 75 deg spigotsSuitable for 100mm and 114mm chucks-bg

View

Type A Plus 100mm Dovetail...

Type A Plus 100mm Dovetail... 2

Челюсти за 100мм патронник Axminster

Type A Plus 100mm Dovetail Jaws

Made in Axminster using CNC techniquesExcellent choice of jaws for big bowl turnersOffers an extra 20mm grip diameter than standard A jawsInternal grip onto 80mm diameter 15° dovetailed spigotExpands into a 100mm 15° diameter dovetailed recessSuitable for 100mm and 114mm chucks-bg

View

Type B 100mm Dovetail Jaws

Type B 100mm Dovetail Jaws 2

Челюсти за 100мм патронник Axminster

Type B 100mm Dovetail Jaws

Made in Axminster using CNC techniquesPart of an extensive range of work holding accessoriesExpands into a 62mm dovetailed recessCompresses onto a 25mm x 75 deg dovetail spigotSuitable for 100mm and 114mm chucks-bg

View

1
2

Продуктът е добавен в Любими

Добавени продукти за сравнение.

Jettools. bg използва бисквитки (cookies). Ползвайки уебсайта, Вие се съгласявате с нашата Политика за кукита. Прочети повече