Аксесоари за металообработващи стругове

90 & 45 Degree Approach... 90 & 45 Degree Approach... 2
Наличност
Tooling-bg

90 & 45 Degree Approach Boring Bars

N/A
ax21494
15,00 лв.
Round boring bars in held in square holdersBoring bits fit into square holes with grub screwsTwo sizes - 340630: 1/2" square bar, 2.1/4" long and 340649: 5/8" square bar, 2.1/2" long-bg
Axminster Junior Chuck Axminster Junior Chuck 2
Наличност
Патронници за струг

Axminster Junior Chuck

Axminster Woodturning Chucks
ax22446
117,00 лв.
Produced with woodturners specifically in mindThe chuck is supplied with three collets: 6-7mm, 10-11mm and 12-13mmGripping range from 2mm to 13mm diameterAbility to handle long lengths of dowel with a hollow headstockThreaded insertAvailable threads-bg
Axminster Lathe Carriers
Наличност
Carriers-bg

Axminster Lathe Carriers

Axminster
ax22534
12,00 лв.
For mounting work on lathe faceplateSizes are the maximum size of the bar that the carrier fits onto-bg
Morse Taper Ground Sleeves
Наличност
Arbors & Sleeves-bg

Morse Taper Ground Sleeves

Axminster
ax23283
19,00 лв.
Female tapered sleeves in four sizesSuitable for reducing Morse taper on tailstock or headstock-bg
HSS Tool Steel
Наличност
Tooling-bg

HSS Tool Steel

Axminster
ax23446
8,00 лв.
Square tool steel with 5% cobalt contentSizes from 1/8" to 3/8" square-bg
Boring Bars with Coolant Holes Boring Bars with Coolant Holes 2
Наличност
Tooling-bg

Boring Bars with Coolant Holes

Glanze
ax377982
77,00 лв.
Drilled through body allowing coolant to be fed to the tipDiameter ranges from 6 to 16mmLength ranges from 80 to 150mmFour flats on body ensure positive locationIncludes cutting tip-bg
Glanze Replaceable Tip... Glanze Replaceable Tip... 2
Наличност
Tooling-bg

Glanze Replaceable Tip Turning Tool Sets

Glanze
ax377994
309,00 лв.
7 piece sets catering for a variety of operationsReplaceable tungsten carbide tipsShank sizes 8, 10 & 12mmPacked in plastic case with Torx key-bg
Glanze Replaceable Tip...
Наличност
Tooling-bg

Glanze Replaceable Tip Facing and Turning Tools

Glanze
ax377998
45,00 лв.
Left and right handed turning toolsFacing and turning tools in choice of shank diameterLong lasting, replaceable tungsten carbide tipsProduce excellent finish on a variety of materialsFree cutting tip included-bg
Axminster Tailstock Die Holder
Наличност
Tooling-bg

Axminster Tailstock Die Holder

Axminster
ax453621
76,00 лв.
Accurate thread cutting guaranteed2MTor 3MT tailstock mountingTakes 13/16",1", 1.5/16" & 1.1/2" split dies-bg
Axminster SIEG SC4 Fixed &... Axminster SIEG SC4 Fixed &... 2
Наличност
Steadies-bg

Axminster SIEG SC4 Fixed & Travelling Steadies

Axminster SIEG
ax715022
114,00 лв.
Steadies give support to long workpiecesFixed steady fastens to lathe bed support when machining end of the workTravelling steady supports the work behind the cutting tip40mm work capacity for both fixed and travelling-bg
Axminster Bottle Stopper Arbor Axminster Bottle Stopper Arbor 2
Наличност
Arbors & Sleeves-bg

Axminster Bottle Stopper Arbor

Axminster Woodturning Chucks
ax802206
28,00 лв.
Made in AxminsterExcellent for fast accurate productionReplacement nylon washers available-bg
Axminster 13mm Keyed Chuck... Axminster 13mm Keyed Chuck... 2
Наличност
Аксесоари за настолни бормашини

Axminster 13mm Keyed Chuck & Arbors

Axminster
ax809590
45,00 лв.
Good quality key operated chucks offering excellent valueAvailable complete with a choice of arborAn excellent accessory for boring on a woodturning latheJaws will close to very small diameter-bg
Metric HSS Slitting Saws
Наличност
Инструменти за фрези метал

Metric HSS Slitting Saws

Axminster
ax847295
33,00 лв.
High quality, high speed steel (HSS) slitting saw blades, with a flat chisel edgeBest suited for use in a millCan be used in a lathe when the workpiece is held in a vertical vice/slide100mm diameter blades have 100 teeth63mm diameter blades have 90 teeth22mm bore (100mm is keyed, 63mm is round)-bg
Glanze Parting Tool Glanze Parting Tool 2
Наличност
Tooling-bg

Glanze Parting Tool

Glanze
ax863364
103,00 лв.
High quality tipped parting toolDouble ended bladeOne cutting tip includedAvailable in 8,10 and 12mm shank sizes-bg
Axminster Evolution SK114... Axminster Evolution SK114... 2
Наличност
Патронници за струг

Axminster Evolution SK114 Woodturning Chuck

Axminster Woodturning Chucks
ax884747
494,00 лв.
Made in Axminster using CNC techniquesDurable stainless steel bodySupplied with soft grip chuck keyNewly designed longer accessory jawsStandard threads:-bg
Glanze Profiling Tool
Наличност
Tooling-bg

Glanze Profiling Tool

Glanze
ax890026
46,00 лв.
High quality carbide profiling toolFor deep profilesIncludes one replaceable carbide insertAvailable in shank sizes 6, 8, 10, 12 and 16mm-bg
Продуктът е добавен в Любими
Добавени продукти за сравнение.

 Jettools. bg използва бисквитки (cookies). Ползвайки уебсайта, Вие се съгласявате с нашата Политика за кукита. Прочети повече