Blades made from Veritas’s own unique PM-V11 steel 1/3 of the scale, approximately 80mm overall 3/8" 9.5mm), 1/4"(6.3mm) and 1/8"(3.2mm) wide Blades hardened to HRC 61-63 and ground flat on the face Bubinga handles with stainless-steel ferrules Made in Canada
Small moulding planes designed to cut fixed radius curves on an edge CT1 cuts 1.6mm(1/16") and 3.2mm(1/8") radius CT2 cuts 4.8mm(3/16") and 6.3mm(1/4") radius Easy to use - cuts on either push or pull stroke Kit supplied with extrusion with all 4 radii and 600g silicon carbide abrasive
Excellent for cutting projecting dowels or plugs Double edged 22tpi with teeth set one way Single edged 26tpi with no set Japanese style tooth pattern Flexible blades cut on the pull stroke Overall length 290mm(11.1/2") with 120mm(4.3/4") blade Made in Canada
8mm(5/16") diameter round blade 120mm(4.3/4") hardened & polished steel Hardwood lacquered handle The toughest scraper blades will not mark this tool Recommended for burnishing all cabinet scrapers
Designed specifically for squaring off the corners of routed hinge gains 9.5mm(3/8") square blade is precision-ground with a 35° bevel on each face. Can be used on its own or with the 50mm tall anodized aluminium guide block (included) for greater accuracy Two imbedded rare-earth magnets hold the chisel squarely in place Outside edges of the block...
Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Maple handle, kiln-baked to seal it against humidity changes Chisels are available in 1/4", 3/8", 1/2", 3/4" and 1" widths Hardness is HRC 61-63 All have 2° micro bevels, and...
Small reamer 5mm to 19mm(3/16" to 3/4") Large reamer 5mm to 30mm(3/16" to 1-3/16") 8mm hex shank
Designed to perform all the functions of round, triangular and oval burnishers Mirror finish to guarantee smooth hooks on cabinet scrapers Unique shape lets you apply just the right amount of pressure Superior surface finish avoids galling and hook tearing Hardened to HRC58-60, this is much harder than scrapers it is used on 11" long including the...
Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Maple handle, kiln-baked to seal it against humidity changes Hardness is HRC 61-63 All have 2° micro bevels and require only final honing before use Made in Canada
1" oval skew Ash handles Accurately formed HSS blades Excellent performance Outstanding value for money
3/4" roughing gouge Ash handles Accurately formed HSS blades Excellent performance Outstanding value for money
Accurately formed HSS blades 3/8"(9.5mm) Bowl gouge 3/4"(19mm) Roughing gouge 3/8" (9.5mm) Spindle gouge 3/4" (19mm) Round nose scraper 3/8" (9.5mm) Parting tool 1" (25.4mm) Oval skew chisel
Produced by Crown and our own turning school tutors Comprises bowl gouge, skew, parting tool, roughing gouge and round nose scraper Rosewood handles Supplied in presentation box