Super-Hard Milled Scrapers & Variable Burnisher - PACKAGE DEAL Veritas

VERITAS VERITAS

717713

New product

Super-Hard Milled Scrapers & Variable Burnisher - PACKAGE DEAL Veritas Expand

Veritas Super-Hard Milled Scrapers

  • Hardened to HRC 48-52 to hold an edge longer
  • Edges are carefully milled to a square, sharp 90°
  • Prepared edges save time and effort of filing and stoning
  • Comes in set of four
  • 50 x 150 x 0.4 & 0.6mm for fine work
  • 60 x 150 x 0.8 & 1mm for heavier stock
  • 1mm scraper suitable for paint removal

Veritas Variable Burnisher

  • Makes raising a burr an easy job
  • Carbide rods fixed at an angle in brass hub
  • Face dial allows angle to be set between 0° and 15°
  • Plastic construction will not damage scraper's face
  • Includes cabinet scraper and full instructions

Повече детайли

107,23 лв

Допълнителна информация

Veritas Super-Hard Milled Scrapers

Whereas most cabinet scrapers are sheared from spring steel and hardened to HRC 38-42, these Veritas scrapers are harder (HRC 48-52) and hold an edge longer. Their edges are carefully milled to a square, sharp 90°. The set includes four thicknesses: for fine work, 0.4mm(0.016") and 0.6mm(0.024") thick, each 50mm x 150mm(2" x 6"); for heavier work, 0.8mm(0.032") and 1mm(0.042") thick, each 60mm x 150mm(2.3/8" x 6").

Veritas Variable Burnisher
Although filing and honing a cabinet scraper is relatively easy it is the raising of a burr where problems seem to occur. The Veritas Variable Burnisher completely eliminates this problem and makes this an easy job. The burnisher has carbide rods fixed at an angle in a brass hub. The dial on the face allows the angle to be set anywhere between 0° and 15°. You rotate the knurled brass knob to your chosen angle and then lock it into place with the brass thumbscrew. 

Reviews

Вашата оценка

Super-Hard Milled Scrapers & Variable Burnisher - PACKAGE DEAL Veritas

Super-Hard Milled Scrapers & Variable Burnisher - PACKAGE DEAL Veritas

Accept Site use cookies