Барабанен шлайф JET DDS-237 940mm

JET JET

121-DDS-237T

New product

Барабанен шлайф JET DDS-237 940mm Expand

- Robust construction for continual production operations
- Precise adjustment system of the rear drum for setting difference to the front drum
- Fast and easy change of abrasive with inbuilt clever clips
- 75 mm or 100 mm wide abrasives strips can be used
- Rubberised pressure rollers provide perfect and accurate sanding
- Table lift on four outstanding threaded rods
- Two speeds of conveyor belt
- 1,5 mm sanding depth by single pass
- Final surface just by single pass
- Accuracy of level 0,2 mm at the whole width up to 940 mm

Warranty 2 years!

Повече детайли

14 800,00 лв

Купи на изплащане

Кредитен модул TBI Bank
 

Допълнителна информация

The Dual Drum Sander of DDS series is designed for finishing of furniture components, building components or levelling of every wood material. This machine is important part of the professional sanders and it is designed for industrial and professional work and fulfills the criteria for everyday use.

The Dual Drum Sander of has a solid and massive construction and also a powerful engine. Two 150 mm sanding drums are made from precise cast duraluminium, perfect balanced and rubber coating. Provide perfect final surface just by single pass. The front drum is fitted with coarse abrasive for effective planning and the rear drum with its micro-setting, which allows you to adjust different height than the front drum, is made for fine finishing. Abrasive strip with 75 mm or 100 mm width is spiral-winded onto the drum and has clever clips, which allows you to fast and easy change of abrasive. Rubberised drums provide quality fixation of sanding belt.

The conveyor belt is made from rubber-textile material and driven by autonomous motor with two-speed gearbox and intelligent changing of two feed speed for perfect sanding of different types of workpiece. Workpiece is pressed to the conveyor belt by three pressure rollers providing equal sanding thickness and safety working.

The massive construction, the powerful motor, two sanding drums and feed speed 2 and 3 m/min helping to sand 1,5 mm depth and thickness in range from 0,8 mm to 133 mm, just by single pass. The both speeds can handle planning with an accuracy of 0,2 mm at the whole sanding width. Precise adjustment is done by hand wheel with digital reading of workpiece thickness to increase the accuracy. Two 100 mm dust extraction outlets guarantee sufficient extraction after sanding.

This is a very solid and dependable machine which will rapidly repay its investment in a busy workshop where high volume throughput is the order of the day. Supplied with abrasive grit 80 (for the first drum) and abrasive grit 100 (for the second drum).

Type: DDS-237
Rating: Professional
Power Input (400 V): 5,55 kW
Speed of Drums: 1400 rpm
Feed Speed: 2, 3 m/min
Diameter of Sanding Drum: 152 mm
Thickness of Sanding: 0,8–133 mm
Min. Length of Workpiece: 230 mm
Max. Width of Workpiece: 940 mm
Width of Abrasive: 75 or 100 mm
Dust Extraction Outlet: 2x 100 mm
Overall Length x Width x Height: 1090 x 1420 x 1090 mm
Weight: 440 kg

Reviews

Вашата оценка

Барабанен шлайф JET DDS-237 940mm

Барабанен шлайф JET DDS-237 940mm

Accept Site use cookies