Axminster Hobby Series HBS250N Bandsaw

Axminster Axminster


New product

Axminster Hobby Series HBS250N Bandsaw Expand

  • Compact, hobby rated machine of steel and cast iron construction
  • Rigid body construction allows high blade tension for increased accuracy
  • Upper and lower ball bearing blade guides, gives better blade control
  • Large, rigid, quick locking rip fence, doors fitted with safety switches
  • Useful depth of cut - 120mm with 245mm width of cut
  • Supplied with cabinet, enhanced rip fence and mitre fence

Повече детайли

809,00 лв

Допълнителна информация

The Axminster Hobby HBS250N bandsaw is a floor standing model with a storage cabinet, rip fence and alloy mitre fence. Enhanced design features include a cam locked, rigid rip fence supported at the rear by a ball bearing with rails allowing the full cutting width up to the frame. Fabricated from sheet steel with a rigid sloping back column design, with cast iron table and balanced cast alloy wheels, the bandsaw has several features usually only found on bigger machines. The stiffness of the steel fabrication allows the blade tension to be much higher than most bandsaws of this size which helps to reduce blade vibration and increase accuracy. The blade is well supported with ball bearing guides both above and below the table. Unusually in a bandsaw of this size, the back edge of the blade runs on the face of the rear thrust bearings rather than the side. The cast iron table has a groove in which the mitre fence slides and is fitted with a rigidly clamped extruded aluminium rip fence. Both doors are fitted with safety micro switches so that if someone was tempted to open a door while the machine is in use, then the motor will cut out. This is a great entry level bandsaw, compact in size yet suprisingly capable in use.Supplied with mitre fence, storage cabinet stand and a UK made Axcaliber blade.

product icon Web_Icon_Warranty product icon Web_Icon_Self_Assembly product icon Web_Icon_Supplied_With
Blade Length1,790mm
Blade Speed660 & 960 m/min
Blade Width Minmax6mm (1/4") to 13mm (1/2")
Dust Extraction Outlet63mm
Max Depth Of Cut120mm
Max Width Of Cut245mm
Max Width Of Cut With Fence220mm
Nett Weight43.5kg
Overall L X W X H420 x 410 x 1,500mm
Power370W, 230V
Table HeightN/A
Table Height On Stand990mm
Table Size340 x 340mm
Table Tilt-5° to +45°
Wheel Diameter250mm


Вашата оценка

Axminster Hobby Series HBS250N Bandsaw

Axminster Hobby Series HBS250N Bandsaw

Accept Site use cookies