Tapered Tenon Cutters Veritas


New product

Tapered Tenon Cutters Veritas Expand

  • Straight-edged blade tapers the ends
  • Size given for each cutter is the minimum tenon diameter it will cut; the maximum is 1/2" greater
  • 3/8", 1/2" and 5/8" sizes will cover most tenoning requirements for typical chair-making

Повече детайли

88,98 лв

Допълнителна информация

Use the cutter like a hand-held pencil sharpener; you either rotate the workpiece while pressing it into the cutter body or you can rotate the tool on the workpiece. Works equally well in soft, green or hard woods. Although the body design is similar to our Veritas dowel and tenon cutters, the cut is quite different. When a tenon is fed through the body, the straight-edged blade tapers the ends, whereas the curved blade on our dowel cutters cuts cylindrical tenons with a radiused shoulder. (If you have already purchased our dowel cutters, buying a straight replacement blade will allow you to cut tapered tenons.) Please note; the curved blade (for dowel making) should be used with only the three smallest sizes of tenon cutters.


Вашата оценка

Tapered Tenon Cutters Veritas

Tapered Tenon Cutters Veritas

Accept Site use cookies